The AID Responder is an intuitive-to-use, streamlined carrier designed for core body protection. Operators can easily adjust the carrier’s one-size-fits-most design in seconds through the padded shoulder straps and side waist band with quick-release buckles. The maximum waist circumference is 61”.The carrier’s low-profile design allows for easy storage and expedient deployment. It can accommodate 10”x12” shooters cut hard armor plates or soft panels in the front and back. The durable design is constructed from 1,000-denier Cordura® nylon and comes with an industry-leading 5-year warranty.Features: Adjustable hook-and-loop shoulder straps for optimal fitment Adjustable side waist band with quick-release buckles (up to 61” waist circumference) Plate pockets to accommodate 10”x12” shooters cut hard armor plates or soft panels for both front and back Cooling spacer mesh to provide stand-off and heat dissipation when worn Reinforced Drag Handle Front and back 8”W x 3”H hook-and-loop ID panel for attaching patches MOLLE modular attachment system on front and back Durable 1,000-denier Cordura® nylon construction 5-year warranty Dimensions: 15"H x 12"W x 1"DWeight: 1lb 6oz <img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=233288470892020&ev=PageView&noscript=1"> <img src="//bat.bing.com/action/0?ti=25078642&Ver=2" height="0" width="0" style="display:none; visibility: hidden;">

This product comes with TWO SOF-T Tourniquets The Universal Armor Tourniquet Dispenser with SOF® Tourniquets is designed to be placed on a ballistic vest or carrier on top of the area where ID patches are normally placed front and/or back. The patch is then placed on top of the Tourniquet Dispenser.Features: Conveniently located for quick and easy extraction of tourniquets Creates more real estate on ballistic vest and plate carriers Fabricated from heavy-duty materials with reinforced stitching Designed to fit most ID patch areas Can be worn on the front and back (back location use if for team or buddy deployment) to increase the number of tourniquets that can be carried on one vest

The SK7 Kourass plate carrier is a next generation light weight and low profile carrier. Not only it offers unsurpassed load support and comfort it is also designed to be virtually unbreakable. SK7’s Kourass is the only vest carrier available with our SAFEgo quick release system. Based on magnetic light weight buckles SAFEgo let the operator to release the carrier with a simple finger movement at the same time that it guarantee a proper fit and operational safety. Using laser cut MOLLE systems offers a light weight alternative to traditional webbing with the same load capacity. All the materials integrated in SK7’s Kourass are proudly made in the United States. Features: Constructed with U.S. made original Cordura®. 500 Denier and 1,000 Denier available. Minimum 10 rows of laser cut MOLLE to attach any available pouches, accessories and holsters. laser cut MOLLE rows on the back 5 laser cut MOLLE rows on each side plate pouches.  Detachable front MOLLIE with SAFEgo buckle and Velcro® hook and loop.  Heavy duty drag handle.  Can handle 10 1/4" x 13 1/4" front and back plates and 6x6” and 6x8” side plates.  Fully adjustable in girth and height for customizing your fit. Original Velcro® panel on the front and back allows you to attach patches for customized ID.

Chase Tactical’s DOS Modular Plate Carrier was designed with direct input from the U.S. Dept. of State as a lightweight modular plate carrier that works with any set of hard armor plates and soft armor backers. The DOS plate carrier accepts full-size plates, up to 10″ x 13″ front and back and features a highly mobile cut with built in padded and fully adjustable shoulder straps.  The front and rear pockets, both shoulders, and cummerbund are fully adjustable. Spacer mesh is used on the inside of the DOS Modular Plate Carrier for increased breathability and comfortable fit. Matching hook & loop covers the upper front and back portions of the carrier for any size hook & loop placards. The DOS Modular Plate Carrier features built in side armor pockets on the interior of the cummerbund will fit side plates up to 6″ x 8″, as well as the cummerbund will accept soft armor up to 5.5″ x 15″. DOS Modular Plate Carrier Key Features: Accepts front-and-back plates up to 10″ x 13″ Accepts side plates up to 6″ x 8″ Cummerbund accepts soft armor up to 5.5″ x 15″ Fully adjustable & padded shoulder straps TAA Compliant Spacer mesh for comfort & breathability Large Hook & Loop area for placards Easy access to ballistic plates with pull down flaps One front map pocket with snap, hook-and-loop closure Side-release buckles on shoulders and internal waist strap All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: Fit Sizes: S – XL adjustable

The most advanced and lightweight plate carrier today. Aimed at filling the gap between uniform plate carriers and robust tactical armor systems, the Noontime™ provides scalability in a professional package. Utilizing advanced textiles technologies produces a lightweight yet rugged and durable carrier. Combining the strength of Aramid thread laminated in a diamond pattern to 500d Cordura® makes the Noontime™ the lightest plate carrier capable of the rigors of operational demands. Key design features allow for the interoperability of other brands’ placards and equipment. The Noontime™ includes our KANGAROO ADJUSTABLE INSERT which is capable of limitless configurations. The 1.5” OneWrap Velcro bottom straps allow the user to set the depth of each of the three individual slots separately. And using Mil-Spec elastic, we ensure its elasticities and retention functions can sustain operational demands. By changing the depth of the sections on the insert as the mission dictates, one eliminates the need for additional inserts or placards. From handcuffs to magazines, tourniquets to radios, the KAI remains the most versatile insert on the market. To then increase its versatility further, we have included dual vertical stitch lines between the sections so that the user can cut away and modify the number of sections of insert used. Our lightweight vented Noontime™ cummerbund provides a minimalistic profile while maintaining tactical load bearing capabilities. Able to secure side armor pouches, we reinforced the cummerbund with Tegris composite for structural rigidity and MOLLE compatibility. Shock cord connects the two cummerbund halves to create optimal sizing options for the ultimate in comfort and usability for the wearer. Our Cummerbunds can be worn with either the Velcro or tube adapter ends to the front of the carrier, allowing the use of our Cummerbunds on a variety of plate carrier systems. Manufacturing:  Made in Texas/Berry Compliant Material:  Waterproof/Rip-resistant 500d Cordura with Diamond pattern Aramid thread laminate backing,  Dura-Stretch® Tweave® Plate bag Included Gear: Individually adjustable triple insert Cummerbund Plate Bag Size: **Fits up to 10″x12″ and Med.  SAPI-size armor. Weight:12oz.  

Lightweight, flat plate carrier with neutral front designed for undercover use.Made from T-SQUARE RIP FD 100% Polyamide. A very tight, special weave of the 210 den fibers makes this fabric extremely stable and light. By using FD (full-dull) yarn the fabric gets a dull surface. FEATURES: Length-adjustable elastic side attachment Ultra flat construction Two additional, detachable, elastic side pockets Adjustable shoulder straps of minimum 9.8n/36cm to maximum 10,2in/20 Suitable for SAPI Plates, up to 12x10 in/30x25cm

  The TT Plate Carrier QR LC is a lightweight plate carrier with MOLLE system in the laser-cut technology, giving this plate carrier a smooth, clean look.This plate carrier size is designed for SAPI plates 12x10in (30x25cm).Provided with a quick-release system with ROC buckle. FEATURES: Laser-cut MOLLE System Compatible with many other TT products allowing for seamless integration Front and side areas with MOLLE system for individual extension Integrated radio equipment pocket Switchable side sections for using pouches for ballistic side plates Shoulder straps of minimum 11 inches (28cm) to maximum 20 inches (52cm) adjustable WEIGHT : 2.87lb MATERIAL: CORDURA® 700 denier (Multicam 500 denier)

The VISM Quick Release Heavy Duty Plate Carrier designed to fit larger front & back armor plates up to 11" X 14" in size. MOLLE webbing for the ultimate in custom configuration. The integrated QR strap setup will allow the VISM Quick Release Plate Carrier to separate into 4 separate panel pieces in case of an emergency that requires the quick removal of the plate carrier from the wearer. FEATURES: MOLLE webbing on the front, back, and side panels allows the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.

The Expert Heavy Duty Plate Carrier is a very affordable vest designed to fit larger front & back armor plates up to 11" X 14" and features MOLLE webbing for the ultimate in custom configuration. FEATURES: MOLLE webbing on the front, back, and side panels allow the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L Side pockets will allow for 6" X 8"  side armor panels/plates. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.

The Chase Tactical Quick Response Carrier (QRC) was developed as a minimalistic no thrills, no frills plate carrier that is lightweight, functional and robust. When worn with ballistic inserts, the QRC can be quickly donned for rapid action response to high threat scenarios such as Active Shooter, Entries, Home Defense, or other critical incidents. Key Features: Adjustable 2″ Wide Shoulder Straps Adjustable 2″ Waist Strap with Quick Release Buckles Front & Back 4″x8″ Color Matched Velcro Area for ID Placards Strong drag handle that Velcro’s down Bottom Load Armor with an Internal Stirrup to Adjust Height Front & Rear MOLLE Webbing Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

Designed for use by instructors, the Instructor Armor Carrier Vest from Voodoo Tactical is bright red for maximum visibility and features removable front and rear Instructor ID patches. The vest is designed to offer for a high level of protection, padded front and rear pockets accommodate ballistic plates or panels.  Additionally, the side 5"x8" pouches are designed for soft ballistic panels. The adjustable, padded side sections accept smaller, soft plates providing protection from all angles. As an additional safety feature, the vest incorporates a sturdy drag handle, allowing teammates to easily pull wearers out of danger. An adjustable hook-and-loop elastic waistband (up to 2XL) and padded shoulder supports allow the vest to fit securely and comfortably for extended wear. Voodoo's signature cooling-mesh interior prevents sweat buildup, guaranteeing lasting comfort and dryness. An internal pocket holds a hydration bladder, or can serve as a convenient place to store documents. For additional storage, the vest's exterior is covered in universal straps, for modular pouch and accessory attachment, as well as D-rings on the shoulders for hands-free flashlight use. Swap out the INSTRUCTOR patch for your department issue placard for a low-cost, high-performance Rescue Task Force vest!

The Rescue Task Force Basic Heavy Duty Plate Carrier is a highly customizable plate carrier vest with many of the best features that you are looking for. The front and rear panel plate carrier compartments will accommodate the standard size and the newer larger armor plates up to 11" X 14" in size. The cummerbund also features side armor pockets to accommodate side armor plates up to 6” X 8”. The plate carrier has fully adjustable heavy duty nylon shoulder straps and large quick connect buckles to adjust how high or low the front and rear panels sit from the wearer’s shoulders. The cummerbund is adjustable in length from a medium to 2XL+ t-shirt sizes, up to a 51” chest/waist size. The front, rear, and side panels all feature MOLLE webbing for customization of your plate carrier to what your mission requires. Fully compatible with MOLLE accessories like holsters, magazine pouch, and utility pouches. The Rescue Task Force Basic Heavy Duty Plate Carrier is a very tough and well made plate carrier with reinforced double stitching in all the critical locations as well as sizing options to fit a wide variety of rescuers among various shifts. FEATURES: MOLLE webbing on the front, back, and side panels allow the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L Side pockets will allow for 6" X 8"  side armor panels/plates. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.

NOTE:  This is not a ballistic vest or armor carrier.  It is a utility vest for medical professionals. The Elite E-VEST’S is the ultimate in comfort and flexibility when it comes to carrying medical essentials. Its coloration and high vis banding ensure the wearer remains visible, even in poor lighting and identifies them as emergency personnel. Universal PAL webbing provides a highly adaptive mounting, or MOLLE system, allowing packs, pouches, or other external items to be secured to the vest. Two zipped front pockets provide excellent, easy access storage for critical medical or tactical provisions. Built from hard-waring fabrics and featuring a highly breathable mesh inner lining, the vest is both durable and comfortable, even in demanding environments. The built in hydration bag and tube provide the user with an important water source, vital when in the filed for extended periods. Features: Universal MOLLE system covers the vest, providing multiple pack anchorage options. Internal rear pocket holds water bladder and tube with bite valve, providing hydration while on the move. Internal rear pocket holds water bladder and tube with bite valve, providing hydration while on the move. Two zipped large breast pockets, perfect for documents or medical materials. Reinforced rear handle to facilitate the support and extraction of injured personnel. Identification panels. Breathable mesh lining helps regulate body temperature. Shoulder and back adjustment ensure a secure and comfortable fit. MESH, 1000D POLYESTER Hydration Pouch Not Included.

First responders have increasingly become the target of violence in recent times... PROTECT YOURSELF AND SAVE LIVES... The NAR Responder Ballistic PPE Vest System is an advanced ballistic solution for Fire/EMS, and is suitable for active shooter/RTF and daily wear by first responders. This system was designed specifically for first responders and includes a Chest Pouch Medical Kit with essential trauma equipment to provide immediate point-of-wounding care to injured casualties. The shape and cut of the vest provides increased ballistic protection while still allowing providers to perform advanced medical care. Optional armored abdomen extender for additional ballistic coverage. Smaller armored cummerbund available to provide custom fit with greater comfort for smaller providers. NIJ 0101.06 IIIA soft armor that has been special threat tested for advanced ballistic threats including fragmentation. Now more than ever, your personal safety is paramount in the performance of your duties. Wearing ballistic protective equipment (BPE) is one of the best ways to help protect yourself in a violent environment. NAR Responder Armor Abdomen Extenders sold separately. Custom ID Patches featuring your text available separately. Contact Customer Service for more information. Features:  Developed for Fire/EMS for daily wear as well as RTF Lightweight advanced ballistic protection Rapidly adjustable to all sizes Allows full range of motion while also providing increased ballistic coverage Fitted external plate pockets – more comfortable than internal ones NIJ 0101.06 Level IIIA protection with additional special threats including fragmentation Rapidly adjustable shoulder straps Maximum Waist Size: 62"  Kit Contents: 4 x C-A-T® (Combat Application Tourniquet) 2 x C-A-T® Holder 2 x 6 in. ETD® Dressing 2 x S-Rolled Gauze 2 x NAR® Pre-Lubricated Nasopharyngeal Airway - 28F(117 mm) 1 x HyFin® Vent Twin Pack 3 x Bear Claw™ Nitrile Gloves, Large 1 x Trauma Shears, Large 1 x Scissor Leash 4 x Combat Casualty Card 2 x Permanent Marker, Large NIJ 0101.06 Certified V50 – 357sig 125gr TMJ (new) | 1867 ft/s P-BFS Avg. – 357sig 125gr TMJ | 27.3 mm V50 – 44mag 240gr JHP (new) | 1661 ft/s P-BFS Avg. – 44mag 240gr JHP | 36 mm Special Threat tested for fragmentation: V50 - 2gr RCC | 3060 ft/s V50 - 4gr RCC | 2642 ft/s V50 - 16gr RCC | 2244 ft/s V50 - 17gr FSP (.22cal) | 2017 ft/s V50 - 64gr RCC | 1866 ft/s V50 – 9mm 127gr SXT (new) | 1754 ft/s P-BFS Avg. – 9mm 127gr SXT | 24.6 mm P-BFS Avg. – 40cal 165gr S+W Sp GDHP | 27.2 mm P-BFS Avg. – 5.7x28 27gr SS195 | 17 mm P-BFS Avg. – 5.7x28 27gr SS197 | 19.3 mm Dimensions: L 15 in. x W 18 in. x D 0.5 in. Maximum Waist Size: 62" Weight: 9.1 lbs.

The RTS Tactical RICO Special Operations Vest with FX770 Level IIIA Soft Armor is the best in its class and provides the utmost protection for Special Operations, SWAT, Entry Teams, and Tactical Operations. Featuring a unique 4-point QR buckle system that allows fast donning and doffing while providing a side loading plate design to easily reduce weight. This vest also comes with a full 360 Laser Cut Load Bearing MOLLE platform, as well as SAPI Plates (front, back, and side) along with hard armor compatible inserts such as 6x8 side plates - making it flexible for mission specific configurations of pouches and accessories. The full soft armor coverage overlapping design provides an added layer of security while being Cummerbund soft armor compatible. For added comfort, this vest boasts an industry-leading spacer mesh backing that allows wearers to use their plate carrier for extended periods without discomfort. Furthermore, upgraded shoulder support ensures extra stability regardless of the user’s environment or surroundings. Additionally, this vest is compatible with RTS Tactical Interchangeable front load out flaps and configurations to further customize your gear for any given mission. RTS Tactical’s FX770 NIJ 0101.06 Level IIIA Armor Weighs in at 1.42lbs Per Sq Foot and Leads the Industry for Light Weight Armor Options at Our Price Point. It is 100% USA Made Armor with Dupont Kevlar™, And Constructed, Sewn Sealed and Goes Through Strict Quality Control in Miami Florida. This vest also features a roomy chest pocket for full sized iPhones, pens, or critical documents, as well as a built-in full size cell phone pouch under the cummerbund. To top it off there are removable Epic Shoulder Pads designed to provide maximum comfort during long operations; not to mention compatibility with multiple RTS Tactical Soft Armor and Hard Armor Packages – making this tactical soft armor vest the ultimate choice when it comes to elite protection in dangerous situations. FEATURES: 4-point QR buckle system for fast donning and doffing. Unique side loading plate design for easy reduction of weight in the field. Full 360 Laser Cut Load Bearing MOLLE platform for Mission specific configuration of pouches and accessories. SAPI Plates front, back, and side Hard Armor compatible:  - S, 8”x10” front and back inserts - M 10”x12” front and back inserts - L 10”x12” front and back inserts - XL 11”x14” front and back inserts - 2XL 11”x14” front and back inserts  All sizes are compatible with 6X8 side plate inserts. Full soft armor coverage overlapping design as well as Cummerbund soft armor compatible. Best in the industry Spacer mesh allows you to wear your plate carrier for long periods of time without discomfort. Upgraded shoulder support. Compatible with RTS Tactical Interchangeable front load out flaps and configurations. Roomy chest pocket for full sized iPhone, pens and critical documents. Built-in Full-size cell phone pouch under the cummerbund. Removable Epic Shoulder Pads Compatible with multiple RTS Tactical Soft Armor and Hard Armor Package  

The TacMed™ Critical Event Response System – Individual package provides you with the necessary equipment for personal protection and medical treatment for life-threatening injuries to yourself or someone else during active shooter and/or hostile event response. The Individual package includes the TacMed™ Responder Plate Carrier with Soft Armor, the Universal Tourniquet Dispenser with SOF® Tourniquets, and a Critical Event Individual Kit to help you meet and exceed multiple standards laid out by NFPA 3000™.Personal Protection Items: The TacMed™ Responder Plate Carrier with NIJ certified Level IIIA soft armor is the perfect option for a budget-conscious agency to provide an armor solution for the entire team. The Universal Tourniquet Dispenser with SOF® Tourniquets provides a place to conveniently mount your tourniquets on your plate carrier for easy ambidextrous access. Individual Package Medical Kit: The Critical Event Individual Kit is compact and stocked with contents to provide effective treatment for traumatic, life-threatening injuries to yourself, another responder, or a casualty on-scene during active threat response. The Critical Event Individual Kit utilizes the Signature Series OIFAK platform to include internal panels that can be adjusted to fit your exact equipment needs while keeping everything secure and organized. The MOLLE straps on the back allow you to attach the kit to your body armor so it’s always with you for immediate on-person access during a high-stress scenario. The Velcro section with MOLLE cutouts on the front allows you to attach an ID patch or attach additional equipment for your needs. What is NFPA 3000™?: First responders are facing an increasing number of active shooter/hostile events where mass casualties can be present, and NFPA 3000™ is a set of standards developed to assist agencies with integrated community preparedness, response, and recovery for these tragedies. Included in the standards are competencies for fire, EMS, and law enforcement responders for threat-based care and hot/warm/cold zone tasks, including knowledge of plans, policies, and procedures for available medical supplies & resources. Each package is available in additional color options and can be customized to meet your exact personal protection and medical response needs. Please contact us for a consultation with one of our experts. This complete lifesaving system is Made in the USA. * Please note that by placing an order with us, you agree to comply with all local, state, and federal laws regarding body armor.United States law prohibits us from selling body armor to you if any of the following apply: You are in the state of Connecticut. You are international. (This includes shipping to APO addresses.) You are a convicted felon. By purchasing from us, you certify that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any federal or state laws. Additionally, you acknowledge that the use of these items will be for legal purposes only.

The TacMed™ Critical Event Response System – Rescue package provides you with the necessary equipment for personal protection, medical treatment for life-threatening injuries for multiple casualties, and casualty evacuation during active shooter and/or hostile event response. The Rescue package includes the TacMed™ Responder Plate Carrier with Soft Armor, the Universal Tourniquet Dispenser with SOF® Tourniquets, a Critical Event Individual Kit, and a Critical Event Rescue Kit to help you meet and exceed multiple standards laid out by NFPA 3000™. Personal Protection Items: The TacMed™ Responder Plate Carrier with NIJ certified Level IIIA soft armor is the perfect option for a budget-conscious agency to provide an armor solution for the entire team. The Universal Tourniquet Dispenser with SOF® Tourniquets provides a place to conveniently mount your tourniquets on your plate carrier for easy ambidextrous access. Rescue Package Medical Kits: The Critical Event Rescue Kit provides you with both life-saving medical treatment and casualty evacuation capabilities in a low-profile backpack. The Critical Event Medic Kit utilizes the Signature Series Med-Pack platform to include internal panels that can be adjusted to fit your exact equipment needs while keeping everything secured and organized and can hold the included Foxtrot® Litter on the bag's exterior for immediate access. The Critical Event Medic Kit contains the following supplies: 1x Signature Series Med-Pack Bag (Black) 1x Foxtrot® DA Litter (Litter Only) 4x TacMed™ Pocket Medical Kit (Compressed Gauze) 4x SOF® Tourniquet Gen 4 (Rescue Orange) 4x OLAES® Modular Bandage (4", Flat-Packed) 2x Control Wrap (4") 2x HALO Chest Seal (Vented, 2-pack, IFAK Size) 4x Nasopharyngeal Airway 28F w/Lube 1x Trauma Shears (5.5") 4x TacMed™ Combat Casualty Card 1x Sharpie (Black) 10PR Nitrile Gloves (Black, Size XL) What is NFPA 3000™?: First responders are facing an increasing number of active shooter/hostile events where mass casualties can be present, and NFPA 3000™ is a set of standards developed to assist agencies with integrated community preparedness, response, and recovery for these tragedies. Included in the standards are competencies for fire, EMS, and law enforcement responders for threat-based care and hot/warm/cold zone tasks, including knowledge of plans, policies, and procedures for available medical supplies and resources. Each package is available in additional color options and can be customized to meet your exact personal protection and medical response needs. Please contact us at info@t-medical.org for a consultation with one of our experts. This complete lifesaving system is Made in the USA. * Please note that by placing an order with us, you agree to comply with all local, state, and federal laws regarding body armor.United States law prohibits us from selling body armor to you if any of the following apply: You are in the state of Connecticut. You are international. (This includes shipping to APO addresses.) You are a convicted felon. By purchasing from us, you certify that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any federal or state laws. Additionally, you acknowledge that the use of these items will be for legal purposes only.

The TacMed™ Critical Event Response System – Mass Casualty package provides you with the necessary equipment for personal protection and medical treatment for life-threatening injuries for multiple casualties during active shooter and/or hostile event response. The individual package includes the TacMed™ Responder Plate Carrier with Soft Armor, the Universal Tourniquet Dispenser with SOF® Tourniquets, a Critical Event Individual Kit, and a Warm Zone Active Shooter Response Kit to help you meet and exceed multiple standards laid out by NFPA 3000™.Personal Protection Items: The TacMed™ Responder Plate Carrier with NIJ certified Level IIIA soft armor is the perfect option for a budget-conscious agency to provide an armor solution for the entire team. The Universal Tourniquet Dispenser with SOF® Tourniquets provides a place to conveniently mount your tourniquets on your plate carrier for easy ambidextrous access. Mass Casualty Package Medical Kits: The TacMed™ Warm Zone Active Shooter Response Kit (WZ ARK) is designed to meet the needs of the medical responder providing care in the warm zone. The WZ ARK holds 8 fully customizable Casualty Throw Kits (CTKs), and in its standard stocking brings 14 SOF® Tourniquets, 14 pressure dressings, 14 chest injury treatments, and 2 Ultralight Poleless Litters. Accessing the CTKs is easier with the new red pull handle that can be manipulated from both sides. The Critical Event Individual Kit is included in the Mass Casualty package so you can have an individual kit with your body armor in case the Critical Event Rescue Kit is not in arm's reach. The Critical Event Individual Kit is compact and stocked with contents to provide effective treatment for traumatic, life-threatening injuries to yourself, another responder, or a casualty on-scene during active threat response. The Critical Event Individual Kit utilizes the Signature Series OIFAK platform to include internal panels that can be adjusted to fit your exact equipment needs while keeping everything secure and organized. Here is what you get with each Individual Kit: 1x Signature Series OIFAK Pouch (Black) 1x SOF® Tourniquet Gen 4 (Rescue Orange) 1x OLAES® Modular Bandage (4", Flat-Packed) 1x TACgauze Wound Wrapping Gauze 1x HALO Chest Seal (Vented, 2-pack, IFAK Size) 1x Trauma Shears (5.5") 1x TacMed™ Combat Casualty Card 1x Sharpie (Black) 3PR Nitrile Gloves (Black, Size XL) What is NFPA 3000™?: First responders are facing an increasing number of active shooter/hostile events where mass casualties can be present, and NFPA 3000™ is a set of standards developed to assist agencies with integrated community preparedness, response, and recovery for these tragedies. Included in the standards are competencies for fire, EMS, and law enforcement responders for threat-based care and hot/warm/cold zone tasks, including knowledge of plans, policies, and procedures for available medical supplies & resources. Each package can be customized to your color preference, protection level, and medical response needs. Please contact us at info@t-medical.org to consult with one of our experts.This complete, life-saving armor system is Made in the USA.* Please note that by placing an order with us, you agree to comply with all local, state, and federal laws regarding body armor.United States law prohibits us from selling body armor to you if any of the following apply: You are in the state of Connecticut. You are international. (This includes shipping to APO addresses.) You are a convicted felon. By purchasing from us, you certify that you have not been convicted of any crime that would restrict you from being able to purchase or possess body armor under any federal or state laws. Additionally, you acknowledge that the use of these items will be for legal purposes only.

The Chase Tactical LVPC Active Shooter Kit is a cost-effective solution for active shooter preparation and response. This kit provides protection against handgun rounds. Kit Components Chase Tactical LVPC Plate Carrier x 1 Chase Tactical SA3100 Level IIIA 10 x 12 Soft Armor Shooter Cut x 2 The Chase Tactical Low-Vis Plate Carrier (LVPC) The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporate 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Chase Tactical LVPC Level IIIA Soft Armor (SA3100) The Chase Tactical SA3100 Level IIIA LVPC Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.32 psf (6.44kg/sqm) Thinness: 0.287” Material: Enhanced blend of woven and unidirectional aramid fibers Multi-hit capabilities Sonobond Sealed rip stop water-resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT.  Armor could take 2-3 Weeks for shipment.

The Chase Tactical LVPC Active Shooter Kit is a cost-effective solution for active shooter preparation and response. This kit provides protection against handgun rounds. Kit Components Chase Tactical LVPC-EPlate Carrier x 1 Chase Tactical SA3100 Level IIIA 10 x 12 Soft Armor Shooter Cut x 2 The Chase Tactical Low-Vis Plate Carrier-Elite  (LVPC-E) The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporate 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Elastic 3 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Hook & Loop area for placards Vertical Clips for rapid add/removal of auxiliary chest worn equipment Front/Rear interior moisture wicking spacer mesh Made with Mil-Spec IR Treated 500D Cordura All our Fabrics are treated at source to deliver the lowest I.R. Signature possible. Chase Tactical LVPC Level IIIA Soft Armor (SA3100) The Chase Tactical SA3100 Level IIIA LVPC-E Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC-E) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.32 psf (6.44kg/sqm) Thinness: 0.287” Material: Enhanced blend of woven and unidirectional aramid fibers Multi-hit capabilities Sonobond Sealed rip stop water-resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT.  Armor could take 2-3 Weeks for shipment.

This affordable Rescue Task Force helmet features a ballistic shell constructed of Kevlar rated at Level IIIA, and capable of stopping 9mm and .44 Magnum rounds up to 1,400 FPS. The helmet features a modern four-point retention system and suspension system for added comfort and stability. Fully adjustable for the perfect fit. It is available in 2 sizes to fit the majority of team members across various shifts Size Large: Size: 22.0" - 22.8" (56cm - 58cm); Weight: 51.1 oz. (1.45 kg) Size XL: Size: 22.8”- 23.6" (58 cm x 60 cm ) Weight: 54.6oz (1.55kg) Not only is the helmet a great value, but the price includes a ballistic helmet carry bag, with carrying straps, shoulder strap, ID holder, MOLLE straps. Dimensions: 10.75"L X 10.0'W X 6.0"D

Lightweight ballistic protection with the Striker ACH Level IIIA High Cut Ballistic Helmet by Chase Tactical Designed in the U.S.A. by U.S. Veterans The Striker ACH Level IIIA Ballistic Helmet is an Advanced Combat Helmet (ACH) designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition and Frag protection according to Mil­Std 662f. The Chase Tactical Striker ACHHC: Advanced Combat Helmet Level IIIA High Cut Ballistic Helmet Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil­Std 662f NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory Materials Including: Kevlar® fibers and thermoset resin shell construction Head protection:  Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 4 pt H Harness Padding: D3O TRUST 7 Pad helmet system Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 3 Weeks for shipment.

Level IIIA Ballistic Protection with the Striker Advanced Combat Helmet (ACH)   The Chase Tactical Stricker Level IIIA Standard Cut ACH Helmet is designed according to the latest US Military requirements, utilizing the most advanced ballistic protection against handgun ammunition. The harness assembly consist of the ACH Comfipad suspension system and a four point harness with a nape pad and leather lined chin strap. This is the most common ballistic helmet used by law enforcement personnel Chase Tactical STRIKER ACH: Advanced Combat Helmet Level IIIA Standard Cut Protection: Level IIIA according to NIJ 0106.01 including Frag protection according to Mil­Std 662f NIJ Standard 0106.01: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0106.01 by an NIJ accredited laboratory Materials Including: Kevlar® fibers and thermoset resin shell construction Head protection:  Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 4 pt H Harness Padding: D3O TRUST 7 Pad helmet system Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL Only shipments to CT. Please allow approx. 4-5 Weeks for shipment. BALLISTICS Cartridge Projectile Vel  (ft/s ± 30)  Vel  (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352 V50 17 gr 2221 677 SIZE Size  Length    Width   Circumference  Weight S 7.1 to 7.6  5.6 to 6.0  21.1 to 21.9 2.7 lbs M 7.6 to 7.9  6.6 to 6.3 21.9 to 22.7 2.8 lbs L 7.9 to 8.3  6.3 to 6.5  22.7 to 24.0 3.0 lbs XL  8.3 to 8.8  6.5 to 7.1  24.0 to 26.0 3.2 lbs  

STRIKER Level IIIA PASGT Helmet by Chase Tactical The STRIKER PASGT helmet (Personnel Armor System for Ground Troops) is designed according to the latest US Military requirements, utilizing the most advanced protection against handgun ammunition. The shell is composed of a multi-layered advanced composite. The harness assembly consist of the standard three-point harness with options for other harness assemblies unique impact protection. STRIKER Level IIIA PASGT Helmet Features: STRIKER PLT: Standard PASGT Protection: Level IIIA Stand Alone Against Handgun Ammunition NIJ Standard 0101.06: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 by an NIJ accredited laboratory Materials Including: Kevlar® fibers and thermoset resin shell construction Head protection:  Front, back, crown, and top of head Adjustable: Multiple Harness options and comes standard with 3 PT US PASGT Harness Sizing: Circumference is measured around head, similar to hat sizing. All sizes are measured in inches. If a measurement falls on a dividing line between sizes, select the larger of the two sizes. Reason: Maximum Ballistic Protection. Warranty: 5 years on all ballistic material excluding exterior cover and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 4-5 Weeks for shipment. BALLISTICS Cartridge Projectile Vel  (ft/s ± 30)  Vel  (ft/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352 V50 17 gr 2258 688   Size Chart Size  Length     Width   Circumference  Weight S 7.1 to 7.6  5.6 to 6.0  21.1 to 21.9 2.8 lbs M 7.6 to 7.9  6.6 to 6.3 21.9 to 22.7 2.9 lbs L 7.9 to 8.3  6.3 to 6.5  22.7 to 24.0 3.1 lbs XL  8.3 to 8.8  6.5 to 7.1  24.0 to 26.0 3.3 lbs  

The VISM ballistic helmet is designed to protect against handgun shots, 9mm bullets and 357 Sig rounds. It is made with an ergonomic design that fits easily and has an adjustable internal harness and OCC-DIAL belt for a comfortable fit. The external rail provides for the attachment of additional equipment. The internal cushion is made of memory foam and creates an impact buffer, as well as being breathable.  The high cut of the helmet is designed to fit noise-cancelling headsets and other communication equipment easily inside the helmet. The helmet is available in three sizes: Medium heads (21.2” – 22.8”) Large heads (22” – 23.6”) Extra large heads (22.5” – 24.4”) Dimensions are 7.75”H x 11”W x 8.75”D, and it weights 54.4 oz

Note: This plate has been independently tested to meet or exceed the Level III+ standard.  Perfect for your armor carrier vest, the VISM Polyethylene Ballistic Plate has been created to be an amazing way to keep protected. A high end armor plate is a crucial unit to have with you in any tactical environment. And because of the VISM Polyethylene Ballistic Plate, having access to an incredible armored plate has not been simpler. Created making use of the highest quality materials, these plates are certain to keep you safe. Features/Specifications: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate. Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds Curved design fits the user with greater comfort, and the cut upper corners (Shooter's Cut) allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12” and 11”x14” sizes Weight: 3.5 lbs. (10”x12”) Weight: 4.5 lbs. (11”x14”) Assembled in the U.S.A.    

NIJ Certified Level III PE Ballistic Plate - Curved Shooters Cut 10"X12" This premium ballistic plate is certified to the NIJ-0101.06 Level III standard for protection from 7.62x51mm NATO rounds. Constructed of 3 layers of Ultra High Molecular Weight Polyethylene (UHMWPE) with a special foam core to disperse energy, it provides superior protection and durability. Features/Specifications: NcSTAR has received its first NIJ Certified body armor plate, the VISM Level III 10x12 Ballistic Plate.  Each plate weighs only 3.3 pounds to reduce fatigue.   The curved design provides a contouring comfortable fit, with upper corners cut (shooter’s cut) for maximum mobility.   The plate is also fully sealed to protect against liquids, chemicals, and other harsh elements.   10 Year Warranty Assembled in the USA. 

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The VISM Level IV Ceramic/PE Composite Plate is constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) to provide a lightweight yet ballistic resistant plate. Rated at a Level III+, it offers protection against 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds. The curved design allows for greater comfort and mobility, and the cut upper corners (STR's Cut) provide additional maneuverability. Fully sealed, the plate is ideal for use in the majority of plate carriers on the market and offers protection against liquids, chemicals, and other harsh elements. FEATURES: Ballistic plate is constructed of a Ceramic/UHMWPE composite resulting in lighter plate Material structure allows for a greater crack resistance over other ceramic plate designs Rated at level IV- capable of stopping .30 caliber AP and M2 rounds with a bullet weight of 166 grains Curved design fits the user with greater comfort , and the cut upper corners allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12”size Weight: 5.5 lbs. Assembled in the U.S.A.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Side Plate is constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate that is rated at Level III Plus - capable of stopping 7.62x51mm. FEATURES: Flat 6" X 6" Square Cut for side coverage. Can be used for the side pockets of some plate carriers with 6" X 6" side pockets. Ideal for use in some VISM Plate Carriers with 6" X 6" side panel pockets. Weight: 17.1 oz. (6”X6” Square Cut) Fully sealed to protect against liquids, chemicals, and other harsh elements Assembled in the U.S.A.

This discreet ballistic panel fits great in most larger sized backpacks and provides a certain degree of protection against level III+ rated threats from most high-velocity rifles.  Features:  Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic plate Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds Flat 11" X 14" rectangular cut for maximum coverage. Can be used for the back panel of a plate carrier, VISM Assault backpack, briefcase, etc. Fully sealed to protect against liquids, chemicals, and other harsh elements Ideal for use in VISM Plate Carriers Weight: 4.4 lbs. (11”x14” Rectangle Cut) Assembled in the U.S.A.  Parents: Please, measure the inside of your child's pack before ordering to ensure proper fit. Should you have ANY questions regarding ballistics, please reach out to us and we will help you in every way.

The Chase Tactical 3A300 Level IIIA LVPC Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 2-3 Weeks for shipment.

This discreet ballistic panel fits great in most larger sized backpacks and provides a certain degree of protection against level IIIA rated threats such as handguns and some shotgun rounds. The panel only adds about 1 pound of extra weight, making it it perfect for children of all ages. Features: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic panel Rated at level IIIA - capable of stopping 9mm and .44 Mag rounds up to 1,400 FPS Will not defeat rifle rounds - We have another model designed for that. Flexible design allows the panel to conform to various shapes – ideal for use in body armor carriers, backpacks, laptop cases, and luggage. Fully sealed to protect against liquids, chemicals, and other harsh elements Ideal for use in VISM Plate Carriers Available in 8”X10”, 10”X12”, and 11”x14” sizes Available with Shooter's Cut or Rectangle Cut Weight: 1.1 lbs. (10”x12” Rectangle cut) Made in the U.S.A. Parents: Please, measure the inside of your child's pack before ordering to ensure proper fit. Should you have ANY questions regarding ballistics, please reach out to us and we will help you in every way.

Price is for a SET of 2 panels - Front and Back The SA3100 Level IIIA Soft armor panel provides excellent protection against handgun rounds at a price point most individuals and small agencies can afford.  It is designed to work with the Trooper ACAP-RESCUE and CAP-RESCUE Plate carriers, but will fit a variety of other similarly sized units. NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.32 psf (6.44 kg/sqm) Thinness: 0.287’’ Material:  Enhanced blend of woven and unidirectional aramid fibers Multi-hit capabilities Sonobond Sealed ripstop water resistant cover Custom sizing: Available for minimum quantity +20% surcharge per size. Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship WEAPON TYPES CARTRIDGE PROJECTILE VEL (ft/s ± 30) VEL (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm  Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352   SPECIAL THREATS CARTRIDGE PROJECTILE VELOCITY 9mm  SXT 9-mm +P+, 127-grain SXT  1360 fps / 415 ms .40 Cal GDHP .40-cal., 165-grain S+W Speer GDHP     1279 fps / 390 ms 5.7 x 28mm SS195 5.70 x 28-mm, 27-grain SS195 LFHP 2041 fps / 622 ms 5.7 x 28mm SS197 5.70 x 28-mm, 40-grain Hornady V-Max Blue Tip 1815 fps / 553 ms

Price is for a SET of 2 panels  The SA3100 Level IIIA Soft armor cummerbund panels provide excellent protection against handgun rounds at a price point most individuals and small agencies can afford.  It is designed to work with the Trooper ACAP-RESCUE and CAP-RESCUE Plate carriers, but will fit a variety of other similarly sized units. NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.32 psf (6.44 kg/sqm) Thinness: 0.287’’ Material:  Enhanced blend of woven and unidirectional aramid fibers Multi-hit capabilities Sonobond Sealed ripstop water resistant cover Custom sizing: Available for minimum quantity +20% surcharge per size. Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship WEAPON TYPES CARTRIDGE PROJECTILE VEL (ft/s ± 30) VEL (m/s ± 9) .357 SIG (NIJ06) 125 gr FMJ 1470 448 .44 Magnum (NIJ06) 240 gr SJHP 1430 436 .357 Magnum 158 gr JSP 1430 435 .44 Magnum 240 gr SWCGC 1400 426 9 x 19 mm  Parabellum 124 gr FMJ RN 1400 426 40 S&W 180 gr FMJ 1155 352   SPECIAL THREATS CARTRIDGE PROJECTILE VELOCITY 9mm  SXT 9-mm +P+, 127-grain SXT  1360 fps / 415 ms .40 Cal GDHP .40-cal., 165-grain S+W Speer GDHP     1279 fps / 390 ms 5.7 x 28mm SS195 5.70 x 28-mm, 27-grain SS195 LFHP 2041 fps / 622 ms 5.7 x 28mm SS197 5.70 x 28-mm, 40-grain Hornady V-Max Blue Tip 1815 fps / 553 ms

GUARDIANPAK Ballistic Backpack The GuardianPack™ backpack's quick deployable front carrier includes a 10" X 12" Level IIIA shooters cut soft ballistic panel. The front carrier is housed within a dedicated body armor compartment in the backpack with a magnetically sealed flap until needed. The wearer deploys the front panel by pulling the two shoulder straps over the wearer's head. The front carrier straps can then be buckled around the waist.  The front carrier can be adjusted for height for the proper coverage of the front torso. The front carrier can also be detached from the GuardianPack™ backpack, with top straps that can be buckled together and placed over the head and neck to wear individually and separate from the backpack.  The rear carrier is stationary inside the backpack close to the wearer's back. It contains a 10" X 12" rectangular cut Level IIIA soft ballistic panel.  The main backpack compartment dimensions are 17”H X 12”W X 4D” and the outside zippered pocket is 10”H X 10”W X 1.2”D. Two zippered outside pockets 6.75”H X 9”W, 10”H X 10”W, and two mesh side pockets for water bottles.  DOES NOT PROVIDE PROTECTION FROM RIFLE THREATS, YOU CAN ADD A HARD PLATE FOR ADDITIONAL PROTECTION.

Masada Armor Backpack Vest Masada Armour-Body Armor Made in IsraelThe best tactical gear you can get! The new Masada Armour backpack that transforms into bulletproof vest in less than 2 seconds! Following recent shooting incidents in the U.S, MASADA has decided to develop a highly awaited protective solution for students, to enhance their protection and boost their confidence. MASADA has developed the Protective Backpack, an armored backpack, which has an EDC look from the outside, but when needed it transforms into a front and back bulletproof vest.The backpack is designed for regular student or commuter use, to carry books, laptop and other small items with a protective in  closed in separate section of the backpack which cannot be seen during normal daily use of the backpack. Features: The bulletproof backpack is suitable for students, security guards, VIP, undercover officers, EDC, low visibility operators, etc. (children version is coming soon...) Easy and fast opening from backpack to protective vest! (less than 2 sec'.) Easy and fast shoulder adjustment of the backpack Enhanced comfort and freedom of movement with the backpack 3-D mesh material to move moisture away from your back and shoulders Waist belt - to reduce weight from your shoulders Well padded shoulder straps- distribute weight evenly Technical Specs: Protection - soft armor level: NIJ 0101.06 IIIA (stops all handguns bullets). Higher protection level such as level 3, 3+ or 4 can be achieved by adding ballistic hard plates. Capacity: 430 Cubic Inches Pack Volume: 7 Liters ​Weight: 3 kg'. or 5.4 kg' with two ballistic hard plates. Material- Cordura 500- Abrasion resistant Made in Israel by Masada Armour Ltd.  DOES NOT PROVIDE PROTECTION FROM RIFLE THREATS, YOU CAN ADD A CUSTOM Polyethlene Level III+ (1.2 kg) HARD PLATE FOR ADDITIONAL PROTECTION.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. This high-quality pistol armor plate is made with UHMWPE fabrics and pressed with a proprietary technique to create a significantly lighter armor plate from current offerings.  The plate features a durable sprayed-on Polyurea outer coating that protects and fully seals the UHMWPE plate for corrosion protection, structural enhancement, waterproof, abrasion resistance, and for a nice cosmetic appearance. This plate is rated at Level IIIA+ protection, capable of stopping 9mm and .44 Magrounds up to 1,400 FPS. , as tested in accordance with Level IIIA Standard 0101.06.No rifle ammunition protection. The addition UHMWPE layers provide additional Level IIIA+ protectionsagainst these following SPECIAL THREATS cartridges: 9mm, 115 gr. FMJ - Fiocchi 9mm, 127 gr. +P+ SXT .40-cal., 95 gr. HP S&W 5.7 X 28mm, 27 gr. LFHP SS195 5.7 x 28mm, 28 gr. HP SS192 5.7 x 28mm, 40 gr. V-MAX SS197SR - Hornady 7.62 x 25mm, 95 gr. FMJ - Tokarev .357 SIG, 115 gr. JHP .357 cal., 125 gr. HP SIG Gold Dot .357 cal., 125 gr. FMJ SIG - FN All testing should follow Level IIIA Standard 0101.06. The plate also features a Multi-Curved design that fits the user with greater comfort and the Shooter's Cut angled upper corners allow for better mobility. Also protects against knives, edged blades, and spike weapons that offer the wearer the best possible stab protection available. Dimensions: 12.0”H X 10.0”W X 0.46”D Weight: 27.0 oz.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Level III+ SRT SiC Ceramic/PE Composite Plate is a Special Rifle Threat (SRT) plate designed to defeat Level III+ threats from high velocity rifle rounds from the most commonly used rifle threats in use.  The Sic Ceramic/UHMWPE composite resulting in a lighter plate and the material structure allows for a greater crack resistance over other ceramic plate designs The plate's curved design fits the user with greater comfort, and the cut upper corners allow for better mobility and it is fully sealed to protect against liquids, chemicals, and other harsh elements Features: Dimensions: 10” X 12” X 0.8” or 11" x 14" x 0.8" Weight: 4.6 lbs. Level III+ SRT SiC Ceramic/PE Composite Plate available in size: 10”X12”, 11”X14”, 6”X6” Assembled in the U.S.A

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Side Plate is a wonderful adjunct to our Level III+ SRT SiC Ceramic/PE Composite Plate.  This particular plate is a 6"x6" Special Rifle Threat (SRT) side plate designed to defeat Level III+ threats from high velocity rifle rounds from the most commonly used rifle threats in use. The Ballistic plate is constructed of a SiC Ceramic/UHMWPE composite resulting in a lighter plate material structure that allows for a greater crack resistance over other ceramic plate designs FEATURES: Can be used for the side pockets of some plate carriers with 6" X 6" side pockets. Ideal for use in some VISM Plate Carriers with 6" X 6" side panel pockets. Fully sealed to protect against liquids, chemicals, and other harsh elements Dimensions: 6” X 6” X 0.8” Weight: 1.6 lbs. Assembled in the U.S.A.

The NAR Armor Abdomen Extender provides increased ballistic coverage and protection for providers. This extender attaches to the ballistic vest via hook and loop and provides full range movement. Constructed from the same superior ballistic package as our NIJ level IIIA soft armor. Provides an additional platform to mount tourniquets or frequently used equipment. NIJ 0101.06 IIIA soft armor that has been special threat tested for advanced ballistic threats including fragmentation. NIJ 0101.06 Certified V50 – 357sig 125gr TMJ (new) | 1867 ft/s P-BFS Avg. – 357sig 125gr TMJ | 27.3 mm V50 – 44mag 240gr JHP (new) | 1661 ft/s P-BFS Avg. – 44mag 240gr JHP | 36 mm Special Threat tested for fragmentation: V50 - 2gr RCC | 3060 ft/s V50 - 4gr RCC | 2642 ft/s V50 - 16gr RCC | 2244 ft/s V50 - 17gr FSP (.22cal) | 2017 ft/s V50 - 64gr RCC | 1866 ft/s V50 – 9mm 127gr SXT (new) | 1754 ft/s P-BFS Avg. – 9mm 127gr SXT | 24.6 mm P-BFS Avg. – 40cal 165gr S+W Sp GDHP | 27.2 mm P-BFS Avg. – 5.7x28 27gr SS195 | 17 mm P-BFS Avg. – 5.7x28 27gr SS197 | 19.3 mm Dimensions: L 4.5 in. x W 10 in. x D 0.5 in. Weight: 0.38 lbs

First responders are increasingly become the target of violence in recent times... PROTECT YOURSELF AND SAVE LIVES... The practical Fire/EMS solution for personnel in active shooter and mass casualty incidents with an emphasis on integrating Tactical Emergency Casualty Care. This lightweight and comfortable cummerbund was developed for Fire/EMS for daily wear as well as RTF. The smaller cummerbund is designed to decrease bulk and unnecessary ballistic overlap for smaller providers while still providing maximum coverage/protection, this increases comfort to the provider for extended wear, same advanced ballistic protection as the NIJ level IIIA armor package utilized in the vest, allows custom fit for smaller to medium sized providers, and provides multiple MOLLE attachment points NIJ 0101.06 IIIA soft armor that has been special threat tested for advanced ballistic threats including fragmentation. Now more than ever, your personal safety is paramount in the performance of your duties. Wearing ballistic protective equipment (BPE) is one of the best ways to help protect yourself in a violent environment. SPECS Developed for Fire/EMS for daily wear as well as RTF Lightweight advanced ballistic protection Rapidly adjustable to all sizes Allows full range of motion while also providing increased ballistic coverage Fitted external plate pockets – more comfortable than internal ones NIJ 0101.06 Level IIIA protection with additional special threats including fragmentation Rapidly adjustable shoulder straps Maximum Waist Size: 62" NIJ 0101.06 Certified V50 – 357sig 125gr TMJ (new) | 1867 ft/s P-BFS Avg. – 357sig 125gr TMJ | 27.3 mm V50 – 44mag 240gr JHP (new) | 1661 ft/s P-BFS Avg. – 44mag 240gr JHP | 36 mm Special Threat tested for fragmentation: V50 - 2gr RCC | 3060 ft/s V50 - 4gr RCC | 2642 ft/s V50 - 16gr RCC | 2244 ft/s V50 - 17gr FSP (.22cal) | 2017 ft/s V50 - 64gr RCC | 1866 ft/s V50 – 9mm 127gr SXT (new) | 1754 ft/s P-BFS Avg. – 9mm 127gr SXT | 24.6 mm P-BFS Avg. – 40cal 165gr S+W Sp GDHP | 27.2 mm P-BFS Avg. – 5.7x28 27gr SS195 | 17 mm P-BFS Avg. – 5.7x28 27gr SS197 | 19.3 mm Dimensions: L 22 in. x W 6 in. x D 0.5 in. Maximum Waist Size: 52" Weight: 1.71 lbs

Tactical Responder Side Armor Pouches from North American Rescue are designed for first responders who are entering unpredictable active shooter situations or facing assault from multiple directions. These rugged nylon pouches allow additional side armor hard plate protection to existing soft armor platforms such as the Rescue Task Force Vest Kit with Side Armor. These rugged nylon pouches accommodate hard armor plates up to 6 in. x 8 in. (not included) and can increase ballistic effectiveness against high caliber threats to Level III or higher. With convenient MOLLE compatibility, these versatile pouches allow hard plates to be positioned properly to fit different user profiles. SPECS: Hard armor plate holder facilitating additional side armor protection Accommodates 6 in. x 8 in. plates (not included) Made of 1000 denier nylon for durability MOLLE compatible with ballistic vest side armor panels Allows hard armor add on to existing soft armor platforms NOTE: Pouch only. Hard armor plates not included Dimensions: L 8.5 in. x H 6.5 in. x D 1 in. Weight: 2.72 oz.

The Chase Tactical Level IIIA SOCC Soft Armor is specifically designed for the Chase Tactical Special Operations Concealable Carrier (SOCC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backers comes in a set of (2) 10″ x 12″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 1-2 Weeks for shipment.

The Chase Tactical 3A300 Level IIIA MEAC Soft Armor is specifically designed for the Chase Tactical MEAC Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.50″ x 11.50″ SAPI style and Cummerbund Armor comes in a set of  or Large 5.50″ x 13.50″. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 4-5 Weeks for shipment.

Note: This plate has been independently tested to meet or exceed the Level III+ standard. Perfect for your armor carrier vest, the VISM Polyethylene Ballistic Plate has been created to be an amazing way to keep protected. A high-end armor plate is a crucial unit to have with you in any tactical environment. And because of the VISM Polyethylene Ballistic Plate, having access to an incredible armored plate has not been simpler. Created making use of the highest quality materials, these plates are certain to keep you safe. Features/Specifications: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate. Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds The MULTI-CURVED design fits the user with greater comfort, and the cut upper corners (Shooter's Cut) allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12”  Weight: 3.5 lbs. (10”x12”) Assembled in the U.S.A. Included Accessories: Fully sealed to protect against liquids, chemicals, and other harsh elements.

The Chase Tactical Quick Response Carrier (QRC) was developed as a minimalistic no thrills, no frills plate carrier that is lightweight, functional and robust. When worn with ballistic inserts, the QRC can be quickly donned for rapid action response to high threat scenarios such as Active Shooter, Entries, Home Defense, or other critical incidents. Key Features: Adjustable 2″ Wide Shoulder Straps Adjustable 2″ Waist Strap with Quick Release Buckles Front & Back 4″x8″ Color Matched Velcro Area for ID Placards Strong drag handle that Velcro’s down Bottom Load Armor with an Internal Stirrup to Adjust Height Front & Rear MOLLE Webbing Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

Our 40 mm Ordnance/Flashbang Pouch is made of high quality tactical nylon that exceeds Mil-Spec requirements. Carries one 40 mm HE, HEDP, Smoke or special purpose rounds or one MK141 (or similar sized) flash bangs. The Chase Tactical Single Adjustable 40 mm Ordnance/Flashbang Pouch attaches upright with MOLLE and is designed to carry one 40mm, HEDP, Smoke or special purpose rounds or one MK141 (or similar sized) flash bangs.  Features a quick release buckle strap to keep your ordnance accessible yet secure and an adjustable strap to increase or decrease the strap height. Features: Carries one 40 mm HE, HEDP, Smoke or special purpose rounds or one MK141 (or similar sized) flash bangs Hook / Loop / Snap flap Available in single, double, and triple configuration High strength bar tacked construction Exceeds Mil-Spec requirements

Our Triple Flashbang pouch is made of high quality tactical nylon that exceeds Mil-Spec requirements. Carries three 40 mm HE, HEDP, Smoke or special purpose rounds or 3x MK141 (or similar sized) flash bangs The Chase Tactical Triple Adjustable 40 mm Ordnance/Flashbang Pouch attaches upright with MOLLE and is designed to carry three 40 mm HE, HEDP, Smoke or special purpose rounds or three MK141 (or similar sized) flash bangs.  Features a quick release buckle strap to keep your ordnance accessible yet secure and an adjustable strap to increase or decrease the strap height. Features: Carries three 40 mm HE, HEDP, Smoke or special purpose rounds or three MK141 (or similar sized) flash bangs Hook / Loop / Snap flap Available in single, double, and triple configuration High strength bar tacked construction Exceeds Mil-Spec requirements

Our Double Flashbang pouch is made of high quality tactical nylon that exceeds Mil-Spec requirements. Carries two 40 mm HE, HEDP, Smoke or special purpose rounds or two MK141 (or similar sized) flash bangs The Chase Tactical Double Adjustable 40 mm Ordnance/FlashBang Pouch attaches upright with MOLLE and is designed to carry two 40 mm HE, HEDP, Smoke or special purpose rounds or two MK141 (or similar sized) flash bangs.  Features a quick release buckle strap to keep your ordnance accessible yet secure and an adjustable strap to increase or decrease the strap height. Features: Carries two 40mm HE, HEDP, Smoke or special purpose rounds or two MK141 (or similar sized) flash bangs Hook / Loop / Snap flap Available in single, double, and triple configuration High strength bar tacked construction Exceeds Mil-Spec requirements

The Chase Tactical Double Pistol Mag Pouch, is compact and allows the cover flap to be rolled down and secured with hook & loop, allowing fast access to mags. The Chase Tactical Double Pistol Magazine Pouch is a versatile and durable solution for carrying extra ammunition. Designed to fit most double stack pistol magazines, this pouch is made from high-quality materials to ensure long-lasting use.The open-top design with adjustable retention straps allows for quick and easy access to your magazines, while the MOLLE compatibility enables you to attach it to any compatible gear or platform. With its compact size and sturdy construction, the Chase Tactical Double Pistol Mag Pouch is perfect for military and law enforcement personnel, as well as civilian gun enthusiasts looking for a reliable and convenient way to carry their extra ammunition. Mags pictured not included.