Easily reduce and stabilize open-book pelvic fractures using the patented tightening system. The CRO pelvic binder packs flat and is designed to fit 95% of the population using the Standard size. BOA precision dial system has proven reliability and testing to easily achieve at least 33lbs (150N) of circumferential force. The BOA hardware was selected to eliminate human error during application. Here’s how: The average human hand can tighten between 40-50 lbs. There are no cases of over reduction in the CPG’s, so achieving pressure over the minimum is most desired. How do you know you have enough pressure? There’s no thought involved, just tighten until you can’t tighten anymore. The CoTCCC update, released on 31JAN2017 indicates pelvic binding under "Circulation" for bleeding control, due to common high-energy battlefield MOI's associated with significant morbidity and mortality due to associated vascular injuries. 26% of service members that died in OEF/OIF died with a pelvic fracture. SPECS: BOA Precision Dial System Hook and loop retention for Pressure Delivery Device Approximately half the size in cubic inches of other binders Lightweight 4 in. double-back wrap Easy, one-hand tightening Low-light, no-light features Dimensions: Standard Waist Size: 32 in. - 50 in. hips Weight: 0.75 lbs

The North American Rescue® (NAR) Flat Elastic Wrap Bandage is designed to provide a compact, flat packaged Elastic Wrap Bandage to provide and effective compression wrap. Available in 4 in. width, this latex free compression wraps are comfortable to wear for extended periods of time, easy to use, and can be used for effective compression. They provide a moderate level of support, and are ideal for using as a compression wrap, securing hot/cold packs, splinting, sprains, strains, swelling, and general soreness. SPECS: Latex-free Elastic Wrap Bandage designed to provide support and compression Hook Closure enables the bandage to be wrapped easily and secured without clips Flat packaged for small cube space and footprint Dimensions: Bandage: W 4 in. x L 5 yd (fully stretched)

SAM® Pelvic Sling is the first and only force-controlled circumferential pelvic belt. Featuring an optimized one-piece design, it’s scientifically proven to safely and effectively reduce and stabilize open-book pelvic ring fractures. The patented SAM® AUTOSTOP buckle acts to avoid over- or under-tightening of SAM® Pelvic Sling. Once optimal compressive force is reached, two prongs activate, clicking to confirm correct application. The sling is secured in place with its Velcro® system strap. Features: Force-controlled, ideal compression every time without the guesswork Rapid, simple, three-step application, usually in less than one minute Patented Autostop buckle allows a compression force no greater than 33 lb; vital in high-stress environments where over-tightening could potentially be extreme and harmful “Click” provides clear feedback to confirm correct application Posterior slider for facilitating transfers Radiolucent, MR safe & cleans for re-use with common detergents or anti-microbial solutions Specs: H 7.25 in. x W 7.75 in. x D 4 in. Fits Hip Circumference: from 32 in. to 50 in. Weight: 9.8 oz

The UNO is a modular splinting system for emergency, rescue, military, and outdoors use. It features stepless adjustable support for the upper limbs, lower limbs, head, neck, and pelvis. The UNO is extremely compact. Attach multiple UNO frames to each other easily-the whole surface of the frame is covered in low-profile hook-and-loop straps. The UNO comes with ultra-low profiles straps, that adhere strongly and allows you to easily adjust the angles, tightness, and joints. Modular Design Attach multiple UNO frames to each other easily-the whole surface of the frame is covered in low-profile hook-and-loop straps Stepless Adjustment The UNO comes with ultra-low profiles straps, that adhere strongly and allows you to easily adjust the angles, tightness, and joints Small and Lightweight The three -pack weighs only 900 grams and contains everything that is needed. The UNO can be packed into a flat frame or cylindrical tube, that can travel anywhere with you Compatible with TCCC Equipment The UNBO is designed to work in trauma situations where critical bleeding or blocked airways may be present. It is fully compatible with: Tourniquets IO Needles Wound Dressings Larynx Masks Spine Boards Intubation Tubes Tracheostomy Collar Splints

A lightweight, strong, comfortable splint that can be easily molded to fit almost any fracture. Waterproof, reusable, radiolucent and compact, the SAM Splint II is not affected by environmental extremes. Specifically designed to meet military needs and standards. NSN: 6515-01-494-1951 Special Features: Specifically designed to meet military requirements Easily molded to fit most fractures Both lightweight and strong Comfortable Waterproof Reusable Easy to clean Radiolucent Compact Impervious to environmental extremes Includes illustrated step-by-step instructions Dimensions: Packaged: H 9.25 in. x W 4.25 in. x D 1 in. Splint Unfolded: L 36 in. x W 4.25 in. Weight: 4.5 oz

The Ambu® Perfit ACE extrication collar is designed to assist with the maintenance of neutral alignment, prevention of lateral sway and anterior-posterior flexion and extension of the cervical spine during transport and routine patient care or movement. 6 sizes in one collar Flat storage Radio translucent, CAT & MRI compatible The Ambu Perfit ACE is the only adjustable one-piece rigid cervical spine immobilization device with 16 precise settings for a customized fit within the range of 4 standard adult settings. The Ambu Perfit ACE comes with a comprehensive sizing system for easy and accurate sizing. The Ambu Perfit ACE extrication collar comes with a flip chin piece for flat storage and pre-shaped to fit the chin, and to facilitate intubation and removal of vomitus from the patient’s mouth. The Ambu Perfit ACE is CT and MRI compatible, and comes with a ventilated, posterior shell for fluid drainage. Ambu Perfit ACE is an ideal device for cervical support. Ambu Perfit ACE extrication collar is also available in a Military version that incorporates a camouflage color scheme of olive drab body and charcoal black foam and label. The features and specifications of the Ambu Military Perfit ACE are identical to Ambu Perfit ACE.

The Universal Finger Splint has an extremely thin aluminum core covered by two layers of closed cell foam. It’s pliable enough to be molded to all sorts of shapes, depending on the injury and application. For finger injuries you simply roll the splint around the finger and apply self-adherent gauze to secure in place. Each splint measures approximately 2″ x 4″. Each pack contains ONE (1) splint. Features at a glance: Measures 4.5″ x 36″ fully unrolled Pliable enough to splint any extremity Weighs only 5oz Reusable

Our Universal “Roll” Splint has an extremely thin aluminum core covered by two layers of closed cell foam. This type of splint is highly customizable and can be used to splint virtually any bone in the body. It’s pliable enough to be molded to all sorts of shapes, depending on the injury and application. To apply, simply unroll and bend the splint to the shape of the extremity and wrap with self-adherent gauze or triangle bandage. Can also be cut to length using trauma shears or even ordinary scissors. Once applied, the splint does not have to be removed for x-rays. As long as the surface isn’t contaminated the splint can be rolled back up and stored for future use. Fully unrolled the splint measures 4.5″ x 36″, but comes packaged in a compact 4.5″ x 6″ x 1″ size, weighing only 5 ounces. Each pack contains ONE (1) splint. Features at a glance: Measures 4.5″ x 36″ fully unrolled Pliable enough to splint any extremity Weighs only 5oz Reusable

This bundle includes one 4.5″ x 36″ roll splint and three universal finger splints. Each splint is individually packaged. The Universal “Roll” Splint has an extremely thin aluminum core covered by two layers of closed cell foam. This type of splint is highly customizable and can be used to splint virtually any bone in the body. It’s pliable enough to be molded to all sorts of shapes, depending on the injury and application. To apply, simply unroll and bend the splint to the shape of the extremity and wrap with self-adherent gauze or triangle bandage. Can also be cut to length using trauma shears or even ordinary scissors. Once applied, the splint does not have to be removed for x-rays. As long as the surface isn’t contaminated the splint can be rolled back up and stored for future use. Fully unrolled the splint measures 4.5″ x 36″, but comes packaged in a compact 4.5″ x 6″ x 1″ size, weighing only 5 ounces

2″ Cohesive Self-Adherent Wrap, Tactical Black – Single Roll or Box of 24 Perfect for securing packing gauze, reinforcing bandages, holding down dressings, and affixing malleable splints in place.

2″ Cloth Tape — Single or Box of 6

1″ Cloth Tape — Single or Box of 12

The Soft Shell™ SAM® Splint from North American Rescue is designed to be quickly applied and custom moldable for immobilizing the hand, wrist and forearm. The exceptionally soft construction material is fabricated to wick moisture away from the skin for the ultimate in patient comfort. Since the splint is radiolucent, it can remain in place during X-rays. Easily cleaned with cold water and mild soap, this splint air dries for extended performance in the field. NSN: 6515-01-523-5440 Specs Quick application Custom moldable for immobilizing the hand, wrist and forearm Exceptionally soft and comfortable Fabricated to wick moisture away from the skin Cleans effortlessly with cold water and mild soap, air dries Fits easily into storage Dimensions: 15 in. Splint: L 15 in. x W 4.25 in. x 0.5 in. Weight: 3.2 oz.

A lightweight, strong, comfortable splint that can be easily molded to fit almost any fracture. Waterproof, reusable, radiolucent and compact, the SAM Splint II is not affected by environmental extremes. Specifically designed to meet military needs and standards. NSN: 6515-01-494-1951 Special Features: Specifically designed to meet military requirements Easily molded to fit most fractures Both lightweight and strong Comfortable Waterproof Reusable Easy to clean Radiolucent Compact Impervious to environmental extremes Includes illustrated step-by-step instructions Dimensions: Packaged: H 9.25 in. x W 4.25 in. x D 1 in. Splint Unfolded: L 36 in. x W 4.25 in. Weight: 4.5 oz

The innovative Telescoping Collapsible Splint (TC Splint) is a multi-capable device designed for the secure and rigid splinting of a wide variety of major and minor fractures. Its unique configuration comes complete with nylon sleeve and 6 telescoping inner rigid poles that make it easily deployable in the field, but space saving in your pack. Lightweight and portable, the TC Splint allows for rapid deployment in austere environments and features size and location adjusting hook-and-loop straps, padding and sturdy inner poles to help mitigate patient pain and discomfort during transport. Created to meet a capability gap in the splinting market for securing patient injuries, this patent pending design is ideal for Tactical, Field or Pre-Hospital use by Medics, First Responders, Emergency Management, Adventure Rescue, etc SPECS Multi-capable device for splinting a wide variety of major and minor fractures Lightweight and compact for easy field carry with 6 easily adjustable interconnected telescoping poles and 4 wide elastic bands with hook and loop securing Constructed of rigid, durable high grade 304 stainless steel poles with an exterior non-absorbent 400 denier Nylon shell Internal non-absorbent foam padding provides for patient comfort Includes clearly marked directions on the device as well as an easy-to-use, step-by-step instructional insert Designed for Tactical, Field or Pre-Hospital use by Medics, First Responders, Emergency Management, Adventure Rescue, etc. Water resistant; easy to clean, fold, pack, and use Ideal for use in the field or other austere environments Patent Pending Dimensions: Packaged: L 8 in. x W 5 in. x D 3 in. Open: W 9.5 in. x L 34 in. Weight: 1 lb 4 oz

The CT-6 is a Leg Traction Splint designed for Pre Hospital Care and Patient transport, specifically in combat scenarios. It is primarily used on patients with mid-line femur fractures. The CT-6 helps relieve patient pain and prevents further damage to surrounding muscle and tissue while reducing the risk of death caused from severed arteries. The CT-6 is made of carbon tubing which snaps together via an internal bungee. A buckle secures the Ischial strap to the upper leg and groin. These buckles prevent accidental releases and are commonly used by US military forces. Traction is achieved with a 4 to1 purchase system using a small line to apply tension. This method results in a very precise and delicate form or traction that is also powerful enough to be effective on extra-large adults. The CT-6 is extremely compact, light and strong. Specs: Light: Unit weighs 1.1 lbs. (500 grams) Colors: Black Straps, Black Carbon Tactical Bag: Black Compact: Unit fits in small synch bag, 3 x 4 x 12” (7.6 x 10.2 .30.5cm) Strong: Carbon Fiber poles, nylon webbing and injection molded plastics Effective: Four to one pulley system for efficient, easily adjustable traction Dimensions: Packaged - L 12 in. x W 4 in. x D 3 in. Weight: 1.1 lbs.

The RISE™ (Rigid Immobilization System for Extremities) is engineered to be the most rugged, low-profile, rigid splint for extremity fractures and pelvic binding in the prehospital environment. Born from lessons on the battlefield, it can be intuitively applied under stress to match the injury present as a straight splint, 90-degree splint, or pelvic binder. It can be easily secured to the patient with items such as an elastic wrap or pressure bandage.​The RISE Splint features an innovative design with dynamic living hinges that allow the splint to collapse into the smallest form factor for maximum portability and kit space savings. With its compact size, the RISE™ fits into most individual first aid kits including all standard military issued IFAKs. Additionally, the hinges allow you to easily form-fit to the required shape and dimensions for proper splinting of fractures for both upper and lower extremities.​Unique to the RISE™, multiple cutout slots provide you the capability to create a pelvic binder when paired windlass or ratcheting tourniquet such as our SOF® Tourniquet. The Committee on Tactical Combat Casualty Care (CoTCCC) recognizes splinting and pelvic binding application as a critical step to prevent additional injury before moving a casualty.​The one-of-a-kind construction is made of a lightweight polymer capable of withstanding surface cleaning and harsh elements, including saltwater while maintaining its rigidity and durability. Whether you’re on the battlefield or a responder here at home, the RISE™ is an advantageous addition to any IFAK for increasing your medical capability at the point of injury when needed most.

The H&H Combat Medic Reinforcement Tape gives First Responders added security and support when gauze and elastic straps are not enough. Made from high-quality adhesives and reinforced backing, the H&H Combat Medic Reinforcement Tape is small enough to fit in any kit but gives 100 inches of 2″ tape for all kinds of uses. From additional security for bandages to reinforcing compression to stop blood loss, the H&H Combat Medic Reinforcement Tape is pocket-sized security in any situation. Ordering Information Item Number: CMRT01 Quantity: Individual Roll NSN: 6510-01-549-0927 Package Dimensions: 2" wide x 1.5" diameter Package Weight: 1.25 oz Adhesive made with natural rubber latex

This utility splint made in the USA of high grade aluminum and foam.  It has been proven in the field for years in both civilian and military markets. Redi Splints come in yellow or black, folded or flat. The aluminum interior is more rigid than others on the market, making for a superior splint. Various lengths and widths are available and listed below. FEATURES AND BENEFITS   Strong and supportive for any fractured limb. -Works great for standard infusion/as arm board. -Uses “dead soft” aluminum alloy for easy molding. Can be cut with scissors and folded a variety of ways. Volara foam with closed cell cross linked technology.   Can I cut the splint? Yes but the responder must be aware that the edge of the now exposed aluminum can be sharp and potentially dangerous; it is not recommended.  The Redi Splint is made in several sizes to best suit the patients needs. What kind of padding is used? The Redi Splint uses Volara Foam which utilizes a closed cell cross linked technology.  Unlike many of it’s competitors, this foam will not irritate the skin or cause a rash over time.  It’s durable, safe and very effective in this application. Are there other uses for the Redi Splint? Yes, over the years literally hundreds of uses have created for the use of this splint.  It is for this reason that it has become a staple in many first responder kits.  It’s simple and also effective in many applications. This product is designed to aid in pre hospital immobilization on a very large number of injuries.  Its exact method of application is dependent on the type of injury and the person applying the splint. Typically, it is formed to contour the injured limb to support and protect the patient.  It is then wrapped with a bandage or first aid tape, depending on the preference of the first responder. This is an easy means to secure the splint effectively. Removal can be done carefully with scissors, cutting the tape away and then gently pulling the splint off the patient.  

The Slishman Traction Splint (STS) boasts a red toggle at the end of the shorter traction cord for better grip. The STS's improved labeling and superior red color coding enable quicker patient femur fracture stabilization and application. The STS does not extend beyond the foot-the compact design of the STS won't jam up against ambulance doors or prevent you from placing patients into aircraft. When extricating or hoisting the splint stays safely contained within the board, litter or basket. No risk of striking the splint resulting in further injury or pain to the patient Rapid Patient Application in Under 60 Seconds-The unique design of the STS makes it the fastest splint to apply. No poles to assemble or mechanisms to set up. No long transport delays. Four step application process in rapid and easy The STS is not contraindicated in lower leg injury or Amputation while other traction splints are contraindicated with lower leg injury or amputation, the STS’s unique design allows the ankle strap to be alternately positioned proximal to the calf. This allows femur traction to still be applied and leaves the lower leg accessible for other splinting or bandaging Lightweight and compact - it takes up little space in vehicles or aircraft and can easily be strapped to jump bags and backpacks One size fits all the STS works with both adults and peds. No need to carry two different splints. If your agency requires you to carry two traction splints, two STS splints can be carried for bi-lateral splinting of peds and adults Traction mechanism accessible during transport-If traction adjustment is needed while enroute, the STS traction adjustment is accessible at the patient’s hip, not jammed up against the door or airframe at the patient's foot. You can easily and quickly adjust traction for maximum patient comfort Radiolucent - The STS is radiolucent and will not interfere with patient imaging or exam. No need to remove the splint. The STS can stay on a patient all the way to surgery The STS embodies significant improvements to traction splinting: No extension past the foot Quickly adjusts to patient Easily applied during manual traction Not contraindicated for lower leg injury or amputation Light and compact One size fits all Specifications: Weight: 21 ounces (595 grams) in the case Carrying Case Dimensions: 22in x 3in x 3in (56cm x 7.6cm x 7.6cm) Telescoping poles are made of light weight, high tensile strength 6061 aluminum. Aluminum is barely visible on X-ray. Thumb screws on locks are steel, and are therefore, visible on X-ray. Corrosion and shock resistant. Includes: 3 telescoping aluminum poles with 2 easy-to-use thumb screw locks neoprene ankle hitch adjustable nylon groin strap with quick- release buckle optional mid-leg neoprene strap that can be applied for added rotational stability

The North American Rescue (NAR) Elastic Wrap Bandage is designed to provide support and compression during recovery and return to activity. Available in widths of 2, 3, 4 and 6 in., these latex free compression wraps are comfortable to wear for extended periods of time, easy to use, and adjustable for a custom fit. They provide a moderate level of support, and are ideal for securing hot/cold packs, splinting, sprains, strains, swelling, and general soreness.