We are proud to support our customer base of medical professionals, LEO, military, firefighters, and EMS / first responders. In their line of work, carrying medical gear is a vital part of their duty. Our new TQ1 Tourniquet Holder is the perfect solution to mount additional tourniquet support to any MOLLE surface. The TQ1 is made from nylon webbing as the main body and elastic webbing to provide side support and retention of a tourniquet. A hook and loop closure keeps the tourniquet in place and is vertically adjustable for shorter or longer tourniquets. A red Hypalon pull tab offers quick identification to access the tourniquet. Side elastic webbing keeps a tourniquet secured in place and offers additional gear management for gloves, a permanent marker or a needle decompression set. A slip pocket behind the TQ allows you to store full size trauma shears and can be secured in place with a snap button. Built in MOLLE attachment on the back allows you to mount the holder to any MOLLE surface where you want additional bleed control gear.  We designed the TQ1 to be compatible with the most commonly used tourniquets in the industry. The CAT Gen 7, SOF-T, SAM XT, and the TMT TQ being the most popular models recommended to us by our medical dealers to use during development.  

The C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of 1000D IR Signature Reduced Nylon with MOLLE/PALS-style connectors. The C-A-T® Holder protects your tourniquet from the elements and has an easy-open elastic pull tab. The C-A-T® Holder is available in Black, Coyote, and Multicam, Red and OD Green colors. Made in the USA Berry Compliant NTOA Member Approved NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The C-A-T Elastic TQ Holder from North American Rescue was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest, gear or belt for rapid and easy access. It is made of 500D IR Signature Reduced Nylon with MOLLE/PALS-style connectors with end tuck instead of button snap. The Elastic Holder protects your tourniquet from the elements and has an easy-open hood design to completely clear the TQ for removal up down or outward. NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The TQ911 Gen 7 C-A-T® Tourniquet Holster is designed for First Responders to carry a Gen 7 Combat Application Tourniquet® (C-A-T®) on their 2.25 in. duty/patrol/pistol belt. This allows personnel to have one of the most crucial life saving devices with them and accessible at all times. Designed and patented by a tactical law enforcement instructor, the TQ911 C-A-T® Tourniquet Holster is made in the USA from a nearly indestructible glass filled polymer used by major firearms manufacturers. Injection molded in a one-piece design, there are no rivets to snap, clips to break or screws to come loose. The compact design fits securely and easily on the belt, taking up less cube space than other tourniquet holsters and is ideal for a variety of Law Enforcement personnel including: Plain Clothes, Patrol and any Officer or Agent that wears a duty, patrol or pistol belt. The TQ911 Gen 7 C-A-T® Tourniquet Holster empowers users who understand the importance of securing the C-A-T® Tourniquet in place during the performance your duty roles while allowing fast and easy deployment when required for treatment.

Always have the Gen 7 C-A-T® within easy reach, yet keep it protected in a rigid holder capable of withstanding foot pursuits, combative subjects and daily patrol functions without allowing it to fall out of the carrier The Gen 7 C-A-T® RIGID TQ Case® was designed to provide personnel with the capability to carry the life-saving C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The case is made from Injection Molded Nylon whic provides strength and durability as it holds the Gen 7 C-A-T® Tourniquet tightly in place.  The case design allows it to be used with no straps or covers so that the tourniquet can be quickly and easily removed by grabbing and pulling the top part of the C-A-T® Tourniquet. The case also includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The Gen 7 C-A-T® RIGID TQ Case with Cover was designed to provide personnel with the capability to carry and protect their life-saving Gen 7 C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The Case Cover completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Injection Molded Nylon Case provides strength and durability as it holds the C-A-T® Tourniquet tightly in place. When deployed, the cover "breaks apart" so there is no snagging on your tourniquet and allows for easy and quick deployment of the C-A-T®. Includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The Gen 7 C-A-T® RIGID TQ Case with Cover was designed to provide personnel with the capability to carry and protect their life-saving Gen 7 C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The Case Cover completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Injection Molded Nylon Case provides strength and durability as it holds the C-A-T® Tourniquet tightly in place. When deployed, the cover "breaks apart" so there is no snagging on your tourniquet and allows for easy and quick deployment of the C-A-T®. Includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The Kydex Tourniquet TACO by High Speed Gear is designed to retain windlass tourniquets on a belt, rig, or bag using the unique properties of Kydex. Comp-Tac uses airline-grade Kydex, which has a smooth inside finish, is resistant to sweat and solvents, and provides a material that won't damage the tourniquet, or the platform it's attached to. Combining Comp-Tac's Kydex manufacturing capabilities with High Speed Gear's versatile TACO design provides user the best of both worlds in manufacturing and use.Features: 100% aircraft-grade Kydex body gives a smooth finish for easy insertion and draw (0.080 thickness) Unique shock cord design allows for the use of most windlass-style tourniquets Kydex does not hold water and won't add weight from rain, humidity, or sweat TACO hole pattern allows for stacking two pouches in the space of one Can be mounted to belts up to 2"

When the TacMed™ LAPD Kit is worn on the leg, it can attach to this tourniquet pouch worn on the officer's duty belt. When the kit and tourniquet pouch are worn together, the detachable lower portion of the kit provides for additional medical capabilities if the situation dictates, while having the tourniquet available for instant access on the officer's belt. Designed to work with the TACMED LAPD Kit.

The TitanCare® Quad Tourniquet Pouch holds four SOF® Tactical Tourniquet-Wide (SOF® TT-W) or four Combat Application Tourniquet®(C-A-T®). Enables external mounting to Modular Lightweight Load-carrying Equipment (MOLLE) Systems for quick access.

Several versions available: Pouch with SOFTT-W tourniquet only Pouch with SOFTT-W tourniquet, Beacon Chest Seal, ESMARK bandage, & compressed gauze Pouch with SOFTT-W tourniquet, Beacon Chest Seal, ESMARK bandage, & Combat Gauze The TacMed™ Uniformed Medical Kit (UMK) 2nd Generation builds upon the success of the first generation UMK. The UMK 2nd Gen greatly decreases the signature of the device over the original by moving the medical gear and pockets behind a flat panel, eliminating any imprinting under the officer's duty shirt. In addition, the UMK 2nd Gen increases comfort and durability as it reduces the thickness of the device with a new material that stretches to the shape of the officer's vest.  The new design allows the UMK 2nd Gen to fit ANY concealed body armor carrier that utilizes hook and loop straps, plus the sides can be trimmed for a custom fit. The UMK 2nd Generation is designed to carry the SOF® Tactical Tourniquet-Wide with additional pockets designed to carry a set of chest seals, hemostatic agent, and the Esmark Bandage, or similarly sized components. Benefits of the UMK 2nd Generation: New design adapts the device to fit a wide variety of body types New design features an even lower profile... No imprinting under the officer's duty shirt! Central placement provides the officer instant ambidextrous access to their medical kit Allows the uniformed officer to carry a complete medical kit on them at all times Creates instant recognition among officers of the placement of medical gear Instant access to trauma gear saves precious time, allowing the officer to provide self-aid and responding officers to provide buddy-aid in the case of a serious injury.

The TacMed™ Uniformed Medical Kit (UMK) 2nd Generation builds upon the success of the first generation UMK. The UMK 2nd Gen greatly decreases the signature of the device over the original by moving the medical gear and pockets behind a flat panel, eliminating any imprinting under the officer's duty shirt. In addition, the UMK 2nd Gen increases comfort and durability as it reduces the thickness of the device with a new material that stretches to the shape of the officer's vest.  The new design allows the UMK 2nd Gen to fit ANY concealed body armor carrier that utilizes hook and loop straps, plus the sides can be trimmed for a custom fit. The UMK 2nd Generation is designed to carry the SOF® Tactical Tourniquet-Wide with additional pockets designed to carry a set of chest seals, hemostatic agent, and the Esmark Bandage, or similarly sized components. Benefits of the UMK 2nd Generation: New design adapts the device to fit a wide variety of body types New design features an even lower profile... No imprinting under the officer's duty shirt! Central placement provides the officer instant ambidextrous access to their medical kit Allows the uniformed officer to carry a complete medical kit on them at all times Creates instant recognition among officers of the placement of medical gear Instant access to trauma gear saves precious time, allowing the officer to provide self-aid and responding officers to provide buddy-aid in the case of a serious injury.  The kit as priced does not come with any components, all sold separately.

Storage of essential equipment is a challenge for patrol officers or individuals working low-vis or plain-clothed operations. The TacMed™ Tourniquet Ankle Holster allows the operator/officer to comfortably and discreetly wear a SOF® Tactical Tourniquet on either leg in virtually any mode of dress. Positioning the tourniquet on the ankle allows rapid access with either hand in the event of a shooting. The design of the holster allows the tourniquet to be removed from the pouch in seconds with one hand, yet is secure enough to run with and not risk the tourniquet falling out of the holster.    Dimensions: 4x 14.5" (one size fits most)

The Laser Cut C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of laser cut laminated Cordura nylon. With an innovative construction process this tourniquet holder weighs 50% lighter than traditional nylon TQ holders. The included snap-free PALS/MOLLE-style connectors ensure secure attachment to a duty vest, gear or belt (mounted vertically). To keep your C-A-T® TQ protected from the elements the Laser Cut C-A-T® Holder has an integrated cover with easy-open elastic pull tab. Features: Constructed with laser cut laminated Cordura®nylon Easy Pull Elastic Cover PALS/MOLLE-style connections Accommodates GEN 6 and GEN 7 C-A-T® tourniquets Weighs less than traditional TQ holders No brass snaps or grommets to wear-out Super durable, yet 50% lighter than traditional nylon TQ holders Designed & built to easily integrate with new, US DoD laser-cut body armor (PCG3 and MSV) yet “backwards compatible” will easily mount to legacy-type MOLLE vests Laser-Cut “TQ” with contrasting background color 4 ea. front-mounted, laser cut MAPs (MOLLE Attachment Points) for “stacking”. Can easily stack or mount 2 pouches together saving precious plate carrier real-estate Deploys easily with one hand, integrated cover with snug, elastic pull-tab C-A-T® TQ sold separately NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

5.11 FLEX Tourniquet Pouch Being a first responder is a passion, not just a job description. Our Flex Tourniquet Pouch provides ready and unfailing access should the unthinkable happen. This pouch can be mounted vertically utilizing the 5.11® FLEX-HT™️ Mounting System or horizontally using integrated hook/loop straps on MOLLE platforms as well as multiple angles on HEXGRID®. The Flex Tourniquet Pouch also features a tuckable hook/loop flap for a drop-down plate carrier attachment. Elastic compression webbing keeps everything secure during high-speed movement and the Hypalon® pull tab ensures quick opening when seconds count. Imported. Dimensions:6.0” H x 2.0” L x 1.5” D Weight 0.08kg   NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

This Combat Tourniquet Holster is specifically designed to fit the Gen 7 CAT tourniquet and other combat TQs. The rear straps allow for an easy and reliable attachment to any MOLLE platform. The holder's adjustable height and customizable mounting positions enable it to be mounted both horizontally and vertically. Its longer rear straps even accommodate duty belts up to 3" wide.  The Rigid Tourniquet Holder offers essential protection for first responders and public safety personnel. Its secure and adjustable design accommodates the Gen 7 C-A-T combat tourniquet for fast deployment in an emergency. Mount it vertically, horizontally, or at a right or left angle, and adjust its height to suit your unique needs. Injection molded to fit the tourniquet perfectly, no straps, flaps, or buckles are needed. Keep your tourniquet near in an emergency with this reliable holder.