Noted as the best prehospital tourniquet in the February 2008 supplement of The Journal of Trauma The Fastest, Safest, Most Effective Prehospital Field Tourniquet WE SELL ONLY GENUINE North American Rescue CAT TOURNIQUETS that are BRAND NEW! Be wary of imitations, knockoffs, or older generations being sold on E-bay or Amazon.     The patented Combat Application Tourniquet (C-A-T) Gen. 7 is a true one-handed tourniquet proven to be 100% effective by the U.S. Army’s Institute of Surgical Research. Numerous tests held by various laboratories over several years have proved that the C-A-T® can completely occlude blood flow of an extremity in the event of a traumatic wound with significant hemorrhage.The Combat Application Tourniquet (C-A-T) is operated by turning a durable windlass system that contains a patented free-moving internal band.  This combination has been proven to provide the physical force characteristics necessary to occlude blood flow.  This force is also known as true circumferential pressure to the extremity. Once the tourniquet is adequately tightened, bleeding will cease, and the windlass can then be locked into place using the bilateral retaining clips. The tourniquet also features a windlass retention strap that secures via hook and loop over the retaining clips.  This strap can also be used to mark the tourniquet's application time for proper medical management at the definitive care facility. The Combat Application Tourniquet (C-A-T) unique dual securing system is extremely easy to use under survival stress or where fine motor skills are compromised. PRODUCT ENHANCEMENTS: The Gen 7 features a single routing buckle for faster application, decreased blood loss, effective slack removal, fewer windlass turns. and simplified training with single protocol application standards. The windlass rod has been reinforced, now with increased diameter for enhanced strength and aggressive ribbing for improved grip The bilateral windlass clip allows for rapid windlass lock and added strength The enhanced windlass strap changed has been changed from white to tactical gray and sonic welded to clip for constant contact providing safe windlass security and a place to document the application time The stabilization plate has been reinforced with a beveled contact bar The signature red elliptical tip (Red Tip Technology®) provides visual cue during application The Gen 7 features the patented free-moving internal band for true evenly distributed circumferential pressure  DIMENSIONS:  Packaged: L 6.5 in. x W 2.4 in. x D 1.5 in. Open Length: 37.5 in. Weight: 2.7 oz  

The HyFin® Vent Chest Seal Twin Pack from North American Rescue sets the standard for the prevention, management and treatment of an open and/or tension pneumothorax potentially caused by a penetrating chest trauma. Two seals, each individually packaged, are designed to allow the user to apply a seal to both an entry or an exit wound while also giving the option to only apply one and store the other until needed as the situation requires. This innovative design provides 3-vented channels designed to prevent airflow into the chest cavity during inhalation while allowing air to escape through the vent channels during exhalation.  The 3-vent channels are designed to allow blood to escape and also provide a backup fail-safe system, as even if two of the three channels become obstructed, the vent is designed to remain fully operational. Advanced adhesive technology provides superior adhesion as the HyFin® Vent Chest Seal Twin Pack is specifically designed to overcome adverse conditions in austere environments where the casualty may be covered in blood, sweat, body hair, or other environmental contaminants when a reliable chest seal is mandatory. Packaged in a more compact, rugged, easy-to-open twin foil pouch, each chest seal also includes a gauze pad to wipe the wound surface prior to application. The HyFin® Vent Chest Seal Twin Pack has a large red pull tab for single-step peel-and-apply application, while the transparent backing facilitates easy placement over the wound area, conforming to the patient’s chest. NAR packages each chest seal using its signature Red Tip Technology® red tear notches in a rugged, easy-to-open, foil pouch to ensure high-quality performance. The HyFin® Vent Chest Seal Twin Pack meets or exceeds the current EMS Standard of Care and TCCC & TECC Guidelines for treatment of penetrating injuries to the chest and is the superior prehospital chest seal. Dimensions: Device: H 6 in. x W 6 in. (excluding tab) Packaged Folded: H 7.5 in. x W 4.5 in. x D 0.25 in. Packaged Unfolded: L 7.5 in. x W 9 in. x D 0.13 in. Weight: 2.5 oz. US Patents: 7,504,549

The C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of 1000D IR Signature Reduced Nylon with MOLLE/PALS-style connectors. The C-A-T® Holder protects your tourniquet from the elements and has an easy-open elastic pull tab. The C-A-T® Holder is available in Black, Coyote, and Multicam, Red and OD Green colors. Made in the USA Berry Compliant NTOA Member Approved NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

Pack does not come with any medical products, they are shown for display purposes only. The Tasmanian Tiger Flat Medic backpack is an intelligent-designed, purpose-built medical pack with a clearly laid-out interior featuring removable panels with adjustable bungee cords. The MOLLE system on the front and sides is laser cut. The shoulder straps can be removed and kept in a hook-and-loop-secured pouch on the back. The backpack comes with webbing so it can be adapted to a plate carrier system or over a waistcoat. The MK II pack is a larger size than the SMALL version, which allows, even more room to carry medical products, without taking up too much real estate on your back.  It is the perfect pack for a SWAT Team entry medic or Special Operations Medic that requires high mobility. Features: Detachable shoulder straps Large handle for carrying when open Internal variable fixation points to store medical equipment Scissors bag Clear inside pockets identified by colored hook-and-loop fastening. Weight of empty backpack = 960 g // Weight of backpack including all accessories = 1,60 kg Integrated visual markers. Inner detachable plate with elastic loops Laser-cut MOLLE system Comes with adapter straps for direct attachment to protective vests. Length adjustable stowable shoulder straps make carrying large body armor possible. VOLUME 15 Liters | 915 Cubic Inches WEIGHT 56oz | 1.6kg DIMENSIONS 18 x 11 x 3in | 46 x 28 x 8.5cm MATERIAL CORDURA® 700 den

The North American Rescue SPEAR (Simplified Pneumothorax Emergency Air Release) Device is the latest innovation in needle decompression technology. The versatile device has been designed and developed based directly on science, user feedback, and known gaps in the management of tension pneumothorax. Each design feature has been carefully crafted to enhance the user experience and increase the probability of success when a life is on the line. The convenient device allows either lateral decompression or traditional anterior needle thoracostomy. The SPEAR device features a sharper needle point, reducing the amount of force required to insert the needle, as well as a spin-lock features that helps prevent premature separation between the needle and catheter. To help with confirmation of depth and success, the device has centimeter depth markings and a detachable, low pressure one-way check valve that creates an audible whistle as air rushes through. The one-way valve can be removed from the needle and either reapplied to the catheter or left off entirely, according to local protocols. Upon removal of the needle, the remaining catheter is a rigid, kink-resistant material with a soft tip to lessen the impact on possible tissue contact. Also, the catheter features 3 fenestrations (holes) along the length to aid in air flow. The latest TCCC Guidelines have allowed for a 10 Ga Needle in addition to the traditional 14 Ga product. The larger lumen increases the area of flow by more than two and a half times. The additional length of the SPEAR device (total catheter length: 3.75 in.) should allow the user to reach and maintain access to the pleural space in a vast majority of the population. This video will show the LEFT ANTERIOR insertion site, but the SPEAR can be placed in Anterior and Lateral sites bilaterally.  

The LXMB45 Modular Tactical Medic Backpack is the culmination of two years of research, design, and customer feedback by Lightning X for a practical and useful EMS bag for the tactical market. Far too often, tactical medics are forced to buy a military bag with no EMS features, or an EMS bag with no tactical features. Now you can have the best of both worlds, with a well organized and great looking bag all-in-one.  Taking advantage of every available inch of space for organization has allowed us to design a very slim and streamlined bag that will not hinder your movement, and even completely loaded will not sag or slip down your back. The front of the bag has two pockets – one upper and one lower, along with a quick access shove pouch with adjustable retention straps. The MB45 interior features the Color Coded First Aid Medical Kit Accessory zippered pouches with transparent windows, as well as 2 large interior zippered compartments designed to carry small items and diagnostic tools. On the rear of the backpack, we’ve added two shoulder pads and a lumbar pad, each covered in 210 denier nylon to prevent the accumulation of sweat and odor. The lumbar pad has a hidden compartment behind it for storing personal effects or even paperwork. The front, sides, waist, and shoulder straps are covered in modular webbing (MOLLE) loops, including a completely adjustable chest strap, radio mic loops, and two D-rings. All exterior zippers have web pulls for easy operation with a gloved hand. Finally, each padded shoulder strap is completely adjustable and includes a quick-release buckle for safety in emergency situations. Comes complete with a limited lifetime warranty from Lightning X Products. This bag has so many more features, there are just a few: The bag comes with four color-coded (Red, Blue, Green, and Yellow) zipper pouches with a clear vinyl window for easing viewing. They can be added to any medical bag, from any brand. Each bag includes an interior pocket and a webbing pull loop. The green bag, ideally used for airway items, also features elastic loops for OPA’s or nasal airways. Great for mutual aid calls where those assisting may not know the arrangement of your medical bags; just tell them what color bag to give you. Shoulder strap system designed to evenly disperse weight and keeps the backpack high on your back, no matter how much you load it down Hidden hydration port will accommodate any size or type of hydration bladder, including left and right side openings Well designed placement of pouches, loops, and pockets allow for a highly organized backpack with an extremely low profile MOLLE platform on front sides and rear for quick access to tools, adding modular pouches suck as IFAK and placement for a nameplate and company morale patch Dimensions (closed): 19″ (L) x 12″ (W) x 10″ (D)  

Note: This plate has been independently tested to meet or exceed the Level III+ standard.  Perfect for your armor carrier vest, the VISM Polyethylene Ballistic Plate has been created to be an amazing way to keep protected. A high end armor plate is a crucial unit to have with you in any tactical environment. And because of the VISM Polyethylene Ballistic Plate, having access to an incredible armored plate has not been simpler. Created making use of the highest quality materials, these plates are certain to keep you safe. Features/Specifications: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate. Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds Curved design fits the user with greater comfort, and the cut upper corners (Shooter's Cut) allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12” and 11”x14” sizes Weight: 3.5 lbs. (10”x12”) Weight: 4.5 lbs. (11”x14”) Assembled in the U.S.A.    

Tasmanian Tiger IFAK Pouch - SMALL  The pouch does not come with any medical products, they are shown for display purposes only.  The video above shows the LARGE version of the pouch, but the operational concept and design of the pouch  is the same The smaller version of the  TT IFAK pouch is a MOLLE mounted First Aid Kit pouch features the same quick access system as it's bigger brother. It can be mounted on the back of a vest, pack, or belt and allows the user to carry a large amount of medical gear to address many problems within the MARCH algorithm of TCCC. A shock-cord mounting system housed on a solid panel with gear loops on the other side allow for a customized loadout in accordance with the user's needs. FEATURES: Opens out, with hook-and-loop fastening Pull out panel for individual loading Can also be used with 50mm belts MOLLE System Requires 2 MOLLE loops - 4 across  WEIGHT 7oz | 190g DIMENSIONS 6 x 6 x 2in | 15 x 15 x 5cm MATERIAL CORDURA® 700 den

Pack does not come with any medical products, they are shown for display purposes only.  This version is a larger sized medic backpack than the standard version with intelligent and clear interior divider system. The TT Medic Assault Pack L MK II is now the third size of the tried and tested medic backpack from Tasmanian Tiger. The backpack is about 4 cm (one MOLLE strip) deeper than the two smaller models. It has laser-cut MOLLE on the front and sides. The bottom has attachments for a rescue blanket. The light, padded shoulder straps can be removed and stowed in a pocket with hook-and-loop panels on the back. The backpack can also be converted for plate carriers and vests using the straps supplied with it and the stowable carrying handles help to quickly transport it in emergencies. FEATURES: Removable shoulder carrying system that can be stored in the back if needed. Large handle for carrying when open. Inner detachable plate with elastic loops and internal variable fixation points to store medical equipment. Scissors bag Clear inside pockets identified by colored hook-and-loop fastening. Integrated visual markers. Laser-cut MOLLE system Comes with adapter straps for direct attachment to protective vests. Length adjustable stowable shoulder straps make carrying large body armor possible. VOLUME 19 Liters | 1159 Cubic Inches WEIGHT 60oz | 1.7kg DIMENSIONS 18 x 11 x 3.5in | 46 x 28 x 10cm MATERIAL CORDURA® 700 den

GUARDIANPAK Ballistic Backpack The GuardianPack™ backpack's quick deployable front carrier includes a 10" X 12" Level IIIA shooters cut soft ballistic panel. The front carrier is housed within a dedicated body armor compartment in the backpack with a magnetically sealed flap until needed. The wearer deploys the front panel by pulling the two shoulder straps over the wearer's head. The front carrier straps can then be buckled around the waist.  The front carrier can be adjusted for height for the proper coverage of the front torso. The front carrier can also be detached from the GuardianPack™ backpack, with top straps that can be buckled together and placed over the head and neck to wear individually and separate from the backpack.  The rear carrier is stationary inside the backpack close to the wearer's back. It contains a 10" X 12" rectangular cut Level IIIA soft ballistic panel.  The main backpack compartment dimensions are 17”H X 12”W X 4D” and the outside zippered pocket is 10”H X 10”W X 1.2”D. Two zippered outside pockets 6.75”H X 9”W, 10”H X 10”W, and two mesh side pockets for water bottles.  DOES NOT PROVIDE PROTECTION FROM RIFLE THREATS, YOU CAN ADD A HARD PLATE FOR ADDITIONAL PROTECTION.

5.11 FLEX Tourniquet Pouch Being a first responder is a passion, not just a job description. Our Flex Tourniquet Pouch provides ready and unfailing access should the unthinkable happen. This pouch can be mounted vertically utilizing the 5.11® FLEX-HT™️ Mounting System or horizontally using integrated hook/loop straps on MOLLE platforms as well as multiple angles on HEXGRID®. The Flex Tourniquet Pouch also features a tuckable hook/loop flap for a drop-down plate carrier attachment. Elastic compression webbing keeps everything secure during high-speed movement and the Hypalon® pull tab ensures quick opening when seconds count. Imported. Dimensions:6.0” H x 2.0” L x 1.5” D Weight 0.08kg   NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The Laser Cut C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of laser cut laminated Cordura nylon. With an innovative construction process this tourniquet holder weighs 50% lighter than traditional nylon TQ holders. The included snap-free PALS/MOLLE-style connectors ensure secure attachment to a duty vest, gear or belt (mounted vertically). To keep your C-A-T® TQ protected from the elements the Laser Cut C-A-T® Holder has an integrated cover with easy-open elastic pull tab. Features: Constructed with laser cut laminated Cordura®nylon Easy Pull Elastic Cover PALS/MOLLE-style connections Accommodates GEN 6 and GEN 7 C-A-T® tourniquets Weighs less than traditional TQ holders No brass snaps or grommets to wear-out Super durable, yet 50% lighter than traditional nylon TQ holders Designed & built to easily integrate with new, US DoD laser-cut body armor (PCG3 and MSV) yet “backwards compatible” will easily mount to legacy-type MOLLE vests Laser-Cut “TQ” with contrasting background color 4 ea. front-mounted, laser cut MAPs (MOLLE Attachment Points) for “stacking”. Can easily stack or mount 2 pouches together saving precious plate carrier real-estate Deploys easily with one hand, integrated cover with snug, elastic pull-tab C-A-T® TQ sold separately NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The RIG Series Eagle IFAK is a new low profile individual first aid platform designed with a protective hood and quick latch release to keep your life-saving equipment protected and rapidly accessible for deployment. Highlighted design advancements include easy-one hand quick release hood latch and zippers, detachable inner shock cord panel that detaches from the IFAK bag and attachment system that allows both vertical (MOLLE backing) and horizontal (3 in. belt loop) carriage orientations. Features: Protective hood with quick latch release helps protect contents and includes sewn in embroidered medical cross identifier Allows attachment both vertically (MOLLE backing) and horizontally (3 in. belt loop) Quick pull latch and tab for easy one-handed opening Detachable (hook & loop backed) shock-cord inner panel adjusts to secure internal components & is easily removable for rapid access.  Dimensions: Packaged: H 8 in. x W 4 in. x D 3 in. Weight: 7 oz

The Rescue Task Force Basic Heavy Duty Plate Carrier is a highly customizable plate carrier vest with many of the best features that you are looking for. The front and rear panel plate carrier compartments will accommodate the standard size and the newer larger armor plates up to 11" X 14" in size. The cummerbund also features side armor pockets to accommodate side armor plates up to 6” X 8”. The plate carrier has fully adjustable heavy duty nylon shoulder straps and large quick connect buckles to adjust how high or low the front and rear panels sit from the wearer’s shoulders. The cummerbund is adjustable in length from a medium to 2XL+ t-shirt sizes, up to a 51” chest/waist size. The front, rear, and side panels all feature MOLLE webbing for customization of your plate carrier to what your mission requires. Fully compatible with MOLLE accessories like holsters, magazine pouch, and utility pouches. The Rescue Task Force Basic Heavy Duty Plate Carrier is a very tough and well made plate carrier with reinforced double stitching in all the critical locations as well as sizing options to fit a wide variety of rescuers among various shifts. FEATURES: MOLLE webbing on the front, back, and side panels allow the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L Side pockets will allow for 6" X 8"  side armor panels/plates. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.

Note: This plate has been independently tested to meet or exceed the Level III+ standard. Perfect for your armor carrier vest, the VISM Polyethylene Ballistic Plate has been created to be an amazing way to keep protected. A high-end armor plate is a crucial unit to have with you in any tactical environment. And because of the VISM Polyethylene Ballistic Plate, having access to an incredible armored plate has not been simpler. Created making use of the highest quality materials, these plates are certain to keep you safe. Features/Specifications: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate. Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds The MULTI-CURVED design fits the user with greater comfort, and the cut upper corners (Shooter's Cut) allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12”  Weight: 3.5 lbs. (10”x12”) Assembled in the U.S.A. Included Accessories: Fully sealed to protect against liquids, chemicals, and other harsh elements.

Tasmanian Tiger IFAK Pouch  The pouch does not come with any medical products, they are shown for display purposes only. The TT IFAK pouch is a MOLLE mounted First Aid Kit pouch designed with a quick access system. It can be mounted on the back of a vest, pack, or belt and allows the user to carry a large amount of medical gear to address many problems within the MARCH algorithm of TCCC. A shock-cord mounting system housed on a solid panel with gear loops on the other side allow for a customized loadout in accordance with the user's needs. FEATURES: Opens out, with hook-and-loop fastening Pull out panel for individual loading Can also be used with 50mm belts MOLLE System Requires 6 MOLLE loops  WEIGHT 9oz | 250g DIMENSIONS 9 x 6 x 2in | 24 x 16 x 5.5cm MATERIAL CORDURA® 700 den

The Supplemental IFAK Resupply Kit (SIRK™) Gen 1, by North American Rescue® is a compact, durable and easy-to-open vacuum sealed kit that contains the essential items to treat leading causes of preventable combat death. Designed to fit into a BDU pocket or IFAK pouch, the SIRK™ is packaged in a clear bag to allow easy visualization of the kit contents while protecting the items from the elements. If preferred, the contents can also be removed from the vacuum sealed packaging to re-stock an existing IFAK. The SIRK™ features your choice of hemostatic gauze providing the latest treatment capability for the rapid control of severely bleeding wounds. Together with critical hemorrhage control, the SIRK™ also addresses airway and breathing management as well as personal protection. Additionally, a SIRK™ Kit Contents Card with 9 Line MEDVAC printed on the back is included. DIMENSIONS: 1 x C-A-T® Tourniquet 1 x Z-Fold ChitoGauze® Hemostatic Dressing 1 x NAR Compressed Gauze 1 x Emergency Trauma Dressing ETD, 6 in. 1 x HyFin® Vent Chest Seal, Single 1 x Nasopharyngeal Airway w/ lubricant, 28F 1 x Surgical Tape, 1 in. 2 x pair Bear Claw™ Nitrile Gloves 1 x Polycarbonate Eye Shield 1 x Product Label/Contents Card with 9 line MEDEVAC DIMENSIONS: H 7 in. x W 5 in. x D 2 in. Weight: 14 oz

Hardcase emergency first aid kit for treating injuries on the range Be prepared for any medical emergency while enjoying the range with the Range Trauma Kit HARD CASE. It includes all essential medical supplies to treat accidental minor injuries, as well as life-threatening trauma such as penetrating ballistic wounds and severe bleeding. Keep yourself and your friends safe with this reliable first aid kit. Treatment capabilities include penetrating & blast injuries, chest wounds, burns, eye injuries, minor lacerations, sprains and fractures and many other common injuries seen on training and shooting ranges. Bright orange, water-tight case maintains the integrity of your medical products when you need them most. Kit contents are arranged in a modular system featuring a rugged storage organizer in the lid and removable nylon pouches with easy-to-read treatment labels in the main compartment.  SPECIFICATIONS 1 x HyFin® Vent Chest Seal Twin Pack 2 x C-A-T® Tourniquet (Orange) 2 x Combat Gauze LE Hemostatic Dressing 2 x NAR Compressed Gauze 2 x 6 in. Emergency Trauma Dressing (ETD™) 5 x 2-Pack Sterile Gauze Pads, 4 in. x 4 in. 2 x Polycarbonate Eye Shield 2 x Elastic Wrap, 6 in. 2 x Triangular Bandage 2 x SAM® Splint II 1 x Surgical Tape, 2 in. 50 x Flexible Adhesive Strip Bandage, 0.75 in. x 3 in. 1 x Burntec® Burn Dressing, 5 in. x 5 in. 1 x Eye Wash, 4 oz 1 x Forceps, Splinter, 4.5 in. 1 x Trauma Shears, 7.25 in. 1 x Surgical Tape, 2 in. 4 x pair Bear Claw Gloves, Lg. 1 x CPR Mask 1 x Marker, Permanent 1 x Kit Contents Card  DIMENSIONS: L 9.5 in. x W 13.5 in. x H 6 in. Weight: 8 lb 12 oz

The pouch is currently available in BLACK ONLY. The TacMed™ Solutions Operator IFAK XL is the same as our standard Operator IFAK, just larger to carry more components but in the same set up and configuration. Its well laid out interior and full zip opening allows rapid easy access to all components.  THIS IS THE POUCH ONLY, NO CONTENTS ARE INCLUDED Some colors pictured have been discontinued. Dimensions: 7.5"L x 5"W x 4"D  

Hard Case emergency first aid kit for treating injuries on the range This kit features the LXHC75 Air Tight Water Tight hard case with custom molded foam insert, pre-stocked with our LXSMK-R Gun Range Trauma & Bleeding First Aid Kid. Ideal for gun ranges, police departments, hunters, survivalists, campers and many more industries. This kit comes with the supplies necessary to provide life saving first aid in the event of major punctures, cuts or burns in a pre-hospital environment, without the added extras that most first aid kits come with that typically just get in the way. You will receive the kit with all of the supplies already installed in the custom foam insert. You can also buy this case with the universal pluckable foam so that you can arrange the supplies according to your own needs. Kit includes the following items:  C-A-T Tourniquet by North American Rescue Black ARS Chest Decompression Needle, 14g, by North American Rescue Hyfin Vent Chest Seal Twin Pack by North American Rescue Premium CPR Mask with Hard Case Black Emergency Survival Foil Blanket, 52″ x 82″ Silver Cohesive Self Adherent Bandage Roll ” 2″ x 5yd  Black Burn Relief Gel Dressing 4″ x 4″ Compressed Krinkle Gauze  4.5″ x 4.1yd Black Tactical Nitrile Gloves in Poly Bag 4 Pairs 7.5″ Emergency Trauma/Bandage Shear Black Handle Universal Foam Aluminum Core Roll Splint 4.5″ x 36″ Tactical Black/Grey QuikClot 25 Gram Hemostatic Clotting Sponge QuikClot 4″ x 4″ Hemostat Dressing 4-Ply Nasopharyngeal Airway Size 28FR Individually Wrapped Israeli Emergency Military Pressure Bandage 4″ Lightning X First Aid Guide Booklet Lightning X Air Tight Water Tight Hard Case 14″ Custom Cut Foam Insert for Range Kit Black/Grey

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. This high-quality pistol armor plate is made with UHMWPE fabrics and pressed with a proprietary technique to create a significantly lighter armor plate from current offerings.  The plate features a durable sprayed-on Polyurea outer coating that protects and fully seals the UHMWPE plate for corrosion protection, structural enhancement, waterproof, abrasion resistance, and for a nice cosmetic appearance. This plate is rated at Level IIIA+ protection, capable of stopping 9mm and .44 Magrounds up to 1,400 FPS. , as tested in accordance with Level IIIA Standard 0101.06.No rifle ammunition protection. The addition UHMWPE layers provide additional Level IIIA+ protectionsagainst these following SPECIAL THREATS cartridges: 9mm, 115 gr. FMJ - Fiocchi 9mm, 127 gr. +P+ SXT .40-cal., 95 gr. HP S&W 5.7 X 28mm, 27 gr. LFHP SS195 5.7 x 28mm, 28 gr. HP SS192 5.7 x 28mm, 40 gr. V-MAX SS197SR - Hornady 7.62 x 25mm, 95 gr. FMJ - Tokarev .357 SIG, 115 gr. JHP .357 cal., 125 gr. HP SIG Gold Dot .357 cal., 125 gr. FMJ SIG - FN All testing should follow Level IIIA Standard 0101.06. The plate also features a Multi-Curved design that fits the user with greater comfort and the Shooter's Cut angled upper corners allow for better mobility. Also protects against knives, edged blades, and spike weapons that offer the wearer the best possible stab protection available. Dimensions: 12.0”H X 10.0”W X 0.46”D Weight: 27.0 oz.

Whether you are a law enforcement officer on patrol or an EMS professional responding to a critical incident, the TacMed™ Patrol Trauma Response Kit will provide you with the necessary components for on-scene care when seconds count. Designed to be worn on the belt or a MOLLE platform, this compact kit takes up minimal space and locates critical equipment on the provider where it is most needed. The PTRK can be a stand-alone pouch, or with the optional pouch-attaching strap, it can be scaled up to accept either the LAPD Kit, Patrol Rifle Response Kit, or standard Drop Leg Kit. The PTRK has a divider to keep the SOF® Tactical Tourniquet Wide separate from the Esmark Bandage, compressed gauze, and Fox Chest Seal. There is also individual storage for one pair of gloves.Contents: 1x SOFTT-W in Rescue Orange or Black 1x Esmark Bandage 1x Compressed Gauze OR QuikClot Combat Gauze- LE 1x Fox Chest Seal 1PR Gloves