SAM IO Treiber NADELN

What needle sizes are available for the SAM IO Driver?

SAM IO Needles are available in three 15-gauge lengths: 15 mm (MEDTAC1056), 25 mm (MEDTAC1057), and 45 mm (MEDTAC1058). The 15 mm is appropriate for pediatric patients or thin-framed adults at tibial sites with minimal soft tissue. The 25 mm is the standard adult size for most proximal tibia and proximal humerus applications. The 45 mm is indicated for obese patients or adult proximal humerus access where greater soft tissue depth must be cleared. Each size is available individually or in packs of five.

Can SAM IO Needles be inserted without the SAM IO Driver?

Yes. SAM IO Needles feature a 5-point grind tip geometry that allows them to be manually inserted by hand in emergency situations when the SAM IO Driver is unavailable. Manual insertion requires firm, controlled downward rotational pressure to penetrate the cortical bone. While the driver provides better control and tactile feedback, the hand-insertion option provides a critical backup for provider redundancy during IO access under field conditions.

What is the NeedleVISE that comes with each needle?

The NeedleVISE® is a single-use sharps containment block included in each sterile SAM IO Needle package. After IO needle placement and successful access, the stylet is removed from the catheter. The NeedleVISE captures and contains the sharp stylet, preventing accidental needle-stick injury during the post-insertion phase when the provider is focused on aspiration, flushing, and infusion setup. It is a key safety element in the SAM IO system designed for rapid single-handed use.

Are SAM IO Needles color-coded?

Yes. SAM IO Needles use color-coded hubs that adhere to IO industry standards: the 15 mm needle hub is pink/white, the 25 mm is blue, and the 45 mm is yellow. Depth indication markers on the shaft provide additional confirmation of insertion depth. The color system allows providers familiar with other IO platforms to adopt the SAM IO without relearning size identification schemes.

Are SAM IO Needles compatible with other IO drivers?

No. SAM IO Needles are designed exclusively for use with the SAM IO Driver (30-0255 / IO700-EN). The snap-fit connection mechanism and the needle's ratchet-engagement geometry are proprietary to the SAM IO system. They are not compatible with EZ-IO drills, FAST-1, BIG, or other IO platforms. Always match the correct needle to the correct driver system.