Taktisches mechanisches Tourniquet (TMT)

Is the TMT CoTCCC-recommended?

Yes. The Tactical Mechanical Tourniquet™ (TMT™) by Safeguard Medical is CoTCCC-recommended and carries NSN 6515-01-656-6191 for U.S. Department of Defense procurement. It is also CE Approved. The TMT appears on the CoTCCC recommended limb tourniquet list alongside the C-A-T Gen 7, SAM XT, and SOF® Tourniquet as one of the primary devices endorsed for extremity hemorrhage control in TCCC guidelines.

Why is the TMT's 2-inch band significant compared to a 1.5-inch band?

The TMT's 2" co-poly resin acetyl band is 33% wider than the 1.5" bands on the C-A-T Gen 7 and SOF® Tourniquet. Wider tourniquet bands distribute occlusion pressure over a larger surface area, reducing the localized compression intensity on nerves and vessels under the band. This translates to lower occlusion pain for the casualty during extended application — a clinically important factor when patient movement or evacuation time is prolonged. It also reduces the risk of localized nerve injury under the tourniquet. The wider band also seats more effectively on proximal thigh wounds where a narrow band may bridge over soft tissue.

What is the TQ-RAM and how does it work with the TMT?

The TQ-RAM™ (Tourniquet-Rapid Application Module) is a purpose-built accessory by Safeguard Medical for the TMT. It is a dome-shaped point pressure device that mounts into two dedicated slots on the TMT base plate. Once secured, the TMT's windlass tension drives the dome against a wound or packed injury to maintain hands-free direct pressure — allowing the responder to move on to other interventions while the TMT and TQ-RAM maintain hemorrhage control. This makes the TMT the only CoTCCC-recommended limb tourniquet with an integrated junctional pressure accessory, extending its utility to packed wound sites and proximal injuries. The TQ-RAM weighs 0.6 oz and is sold separately.

Why does this set include a Kydex holster instead of a soft pouch?

Rigid Kydex holsters provide positive retention and a defined extraction path that soft pouches cannot. The holster's custom-molded Kydex shell holds the TMT securely without compression — protecting the windlass mechanism and plastic components from being damaged by surrounding gear — while enabling a single, consistent pull to extract the tourniquet. Malice Clips attach the holster to belts, plate carrier webbing, and MOLLE platforms without requiring additional accessories. The rigid shell also protects the TMT from UV degradation and environmental damage during storage on gear.

Can two TMTs be linked together for larger patients?

Yes. The TMT includes a quick-detach clip that allows two units to be connected end-to-end, extending the band to accommodate limb circumferences up to approximately 38" when using a single tourniquet — and beyond when linked. This linkage capability also enables the TMT to be used as a pelvic binder when two units are connected, an additional use case not available with most other windlass tourniquets. The TQ-RAM accessory also supports this configuration, with one TMT looped around the torso and the RAM seated against a junctional wound site.

What limb range does the TMT® accommodate?

The TMT® accommodates limb circumferences from 5¾″ to 38″ (14.6 cm to 96.5 cm), covering pediatric through large adult extremities and allowing application over bulky clothing.

Is the TMT™ CoTCCC recommended?

Yes. The Tactical Mechanical Tourniquet (TMT®) is a CoTCCC-recommended device for extremity hemorrhage control. Its no-internal-band design simplifies removal and resetting; dual locking mechanisms prevent slippage; and the click-confirmation torsion bar confirms secure occlusion. UV-protective additives allow storage outside packaging.

Can the TMT™ be applied with one hand for self-aid?

Yes. The TMT® is taught as both a self-aid and buddy-aid task. Applying high and tight on the proximal third of the affected limb, the no-internal-band design and cam-buckle mechanism allow single-handed application. The quick-disconnect buckle also enables trapped-limb application scenarios.

What is different about the rigid holster compared to a soft MOJO® pouch?

The injection-molded rigid holster provides structured protection against crushing, moisture, and mechanical deformation — important for vehicle mounts, aircraft crew, and environments where a soft pouch may collapse around the tourniquet. It also enables faster one-second draw without the user needing to open or unzip anything. The MOJO® soft holster offers better MOLLE conformability and is lighter on a running duty belt.