SAVe II+ Simplified Automated Ventilator 11.0 lb

Name: SAVe II+ Simplified Automated Ventilator
Brand: AutoMedX
SKU: 6849948123254
Price: 13286.00 AUD
Availability: InStock

$13,286⁰⁰ AUD

Delivery and Shipping

We strive to maintain adequate stock levels of all our products, we are currently facing challenges due to global conflicts and supply chain disruptions. As a result, some items may be temporarily out of stock.

Please be assured that we are working tirelessly to resolve these issues and fulfill your orders as promptly as possible.

While we aim to have your orders delivered within 1-3 weeks, please bear with us during this challenging time.

Your patience and understanding are greatly appreciated as we navigate through these unprecedented circumstances

Description

Compact, economical, and easy-to-use, the SAVe II+ is built for dependable use during a crisis. Medical personnel have relied on AutoMedx products devices for over a decade. The new SAVe II+ delivers up to 50% more flow than the SAVe II and can generate up to 20 cmH2O of PEEP. The SAVe II+ replaces the SAVe II.

This kit includes the following:

1x SAVe II+ Ventilator
1x Hard Case (water and dust proof), PN F20065
1x Power Charger, PN M42090
1x Patient Circuit, PN F20066 (3 year shelf life)
1x Extendable Oxygen Reservor Tubing, PN F20072
1x Noise Attenuator, PN M41112

SAVe II+ Product & Performance Specifications

General:

Dimensions Ventilator         6.5" x 6.25" x 2.0" (81 cubic inches)
Weight Ventilator 2.8 lbs. (1.3 kg)
Weight of Full Kit 9.9 lbs. (4.5 kg)
Operating Mode A/C-CMV
Mode Description      Time cycled, pressure limited, volume targeted.
PRESET Heights      4' 3" - 6' 3" in 3-inch increments
PRESET Target 6 ml/kg of IBW or 30 cmH2O of Working Pressure
Flow Rate 0 - 40 LPM
I:E Ratio 1:2 Fixed
Respiratory Rate 8 - 30 BPM
Tidal Volume           200 - 800 ml
Peak Inspiratory Pressure 10 - 60 cmH2O
PEEP 0 - 20 cmH2O
Inadvertent PEEP < 2.0 cmH2O
FiO2 Range: 21 - 100%
Oxygen Input: 0 - 12 LPM from Flow Regulated Source
Inspiratory Trigger 2.0 cmH2O
Inspiratory Resistance < 6 cmH2O @ 30 LPM
Expiratory Resistance < 6 cmH2O @ 30 LPM
Dead Space < 100 ml
Battery Duration 8.25-9.25 Hours (see below note)
Power Input 100 – 240 VAC / 50-60 Hz
Audible Alarms Meets 60601-1-8
Shock & Vibration IEC 60068-2-6 and 60068-2-36
Ingress Protection Vent IP24
Protective Case         IP67

SETTINGS:

Breath Rate (BPM)       8 – 30
Tidal Volume (ml)      200 - 800
Pressure Limit (cmH2O) 10 - 60
PEEP (cmH2O)    0 - 20

MEASUREMENTS:

PIP (cmH2O) 0 - 60
PEEP (cmH2O) 0 - 25

FIXED PARAMETERS:

I:E Ratio 1:2
Inspiratory Time (Ti) 0.67 - 2.50 seconds
Expiratory Time (Te) 1.3 - 5.0 seconds
Flow Rate (Avg LPM) 4 - 40

Product Life:

Control Unit 8 years
Breathing Circuit 3 year shelf life (single use)

Notes:

1. All specifications include a tolerance of ±10% of nominal value unless stated otherwise in the Operator’s
Manual. Test conditions available upon request.
2. Delivered Tidal Volume may be materially affected by very low lung compliance (< 0.01 L/cmH2O)
3. With a fully charged new battery the 5’9” preset will run approximately 8.25 hrs with (2600 mAh battery) or 9.25 hrs with 2800 mAh battery)