Law Enforcement Packs/Cases (68)

The C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of 1000D IR Signature Reduced Nylon with MOLLE/PALS-style connectors. The C-A-T® Holder protects your tourniquet from the elements and has an easy-open elastic pull tab. The C-A-T® Holder is available in Black, Coyote, and Multicam, Red and OD Green colors. Made in the USA Berry Compliant NTOA Member Approved NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

Pack does not come with any medical products, they are shown for display purposes only. The Tasmanian Tiger Flat Medic backpack is an intelligent-designed, purpose-built medical pack with a clearly laid-out interior featuring removable panels with adjustable bungee cords. The MOLLE system on the front and sides is laser cut. The shoulder straps can be removed and kept in a hook-and-loop-secured pouch on the back. The backpack comes with webbing so it can be adapted to a plate carrier system or over a waistcoat. The MK II pack is a larger size than the SMALL version, which allows, even more room to carry medical products, without taking up too much real estate on your back.  It is the perfect pack for a SWAT Team entry medic or Special Operations Medic that requires high mobility. Features: Detachable shoulder straps Large handle for carrying when open Internal variable fixation points to store medical equipment Scissors bag Clear inside pockets identified by colored hook-and-loop fastening. Weight of empty backpack = 960 g // Weight of backpack including all accessories = 1,60 kg Integrated visual markers. Inner detachable plate with elastic loops Laser-cut MOLLE system Comes with adapter straps for direct attachment to protective vests. Length adjustable stowable shoulder straps make carrying large body armor possible. VOLUME 15 Liters | 915 Cubic Inches WEIGHT 56oz | 1.6kg DIMENSIONS 18 x 11 x 3in | 46 x 28 x 8.5cm MATERIAL CORDURA® 700 den

Pack does not come with any medical products, they are shown for display purposes only. The Tasmanian Tiger Small Flat Medic backpack is an intelligent-designed, purpose-built medical pack with a clearly laid-out interior featuring removable panels with adjustable bungee cords. The MOLLE system on the front and sides is laser cut. The shoulder straps can be removed and kept in a hook-and-loop-secured pouch on the back. The backpack comes with webbing so it can be adapted to a plate carrier system or over a waist coat. Features: Detachable shoulder straps Large handle for carrying when open. Inside pocket Internal variable fixation points to store medical equipment. Scissors bag Weight of empty backpack = 730 g // Weight of backpack including all accessories = 1,15 kg Integrated visual markers. Two removable panels with adjustable bungee cords Laser cut MOLLE system. MOLLE loops on the base Transparent inside pouch with colored hook-and-loop Comes with adapter straps for direct attachment to protective vests. Length adjustable stowable shoulder straps make carrying large body armor possible. VOLUME 6 Liters |366 Cubic Inches WEIGHT 41oz | 1.15Kg DIMENSIONS 13 x 9 x 4in | 34 x 22 x 9cm MATERIAL CORDURA® 700 den

The bag comes empty from the factory - pictures show the interior layout and carrying capacity.    MEDIC-X Vehicle Trauma Kit Pouch is designed to universally attach to any vehicle headrest, or alternately any MOLLE compatible gear or bag with at least 5 rows of loops. The main bag attaches to the rear base via a hook & loop panel so that it can be easily removed in the event of an emergency with only the pull of your hand. Additionally, the bag can be opened while still attached to the base on a headrest and three-tiered panels are revealed. The top two panels have various sizes of elastic tool loops in addition to pockets for storing supplies. The bottom panel is a zippered mesh compartment that is also easily removable via the hook & loop attachment to the bag. The rear attachment panel is reinforced so that it is strong enough to attach to the headrest or bag without sagging, but is pliable enough to contour to the shape of your headrest. Finally, the front of the bag is covered with a laser-cut hook & loop MOLLE panel for storing additional tools, mounting morale patches, or attaching additional MOLLE gear. This panel comes with a rubber RED CROSS emblem included with the bag. With dimensions of 10.25″L x 4″W x 7.5″H, this bag is large enough to hold a well-equipped gunshot/hemorrhage kit, or a multi-person first aid kit. Includes a limited lifetime warranty from Lightning X Products.    

Tasmanian Tiger IFAK Pouch - SMALL  The pouch does not come with any medical products, they are shown for display purposes only.  The video above shows the LARGE version of the pouch, but the operational concept and design of the pouch  is the same The smaller version of the  TT IFAK pouch is a MOLLE mounted First Aid Kit pouch features the same quick access system as it's bigger brother. It can be mounted on the back of a vest, pack, or belt and allows the user to carry a large amount of medical gear to address many problems within the MARCH algorithm of TCCC. A shock-cord mounting system housed on a solid panel with gear loops on the other side allow for a customized loadout in accordance with the user's needs. FEATURES: Opens out, with hook-and-loop fastening Pull out panel for individual loading Can also be used with 50mm belts MOLLE System Requires 2 MOLLE loops - 4 across  WEIGHT 7oz | 190g DIMENSIONS 6 x 6 x 2in | 15 x 15 x 5cm MATERIAL CORDURA® 700 den

This is the pouch only, medical equipment is for display purposes. The Elite Bags Fast's Drop Leg First Aid Bag is full of features and clever design elements in a medium-sized, lightweight, and transportable emergency first aid kit. Designed with real-world feedback from first responders and emergency personnel, the FAST Drop Leg First Aid Bag is the ultimate in utility and functionality with built-in MOLLE and belt loops for unlimited configuration possibilities. Complete with a two-year warranty for manufacturing defects. Available in red and black color configurations (see below). Affordable. Adaptable. Durable. Expandable. Features: Medium Drop Leg Style Bag High Visibility Materials (EB02.031) Interior Pocket w/Drawstring Velcro Flap for Secure Closure Double HD Metal YKK Zipper System MOLLE Compatible Velcro Logo/Name Tape (Removable) Glow-In-The-Dark Pull Strings (EB02.031) Drain Hole (Bottom of Bag) Reflective Zippers (EB02.031) Lightweight at 0.80lbs Quick-Grip Handle Utility Belt Loops Adjustable Elastic Equipment Loops 1000D Polyamide Materials HD Metal YKK Zippers 6.7"x5.9"x2.75" Size

This unique pouch can connect to the assault vest/body armor or to a duty/pistol belt. It has a Quick Pull Tab which easily opens the kit with just one hand and a detachable shock-cord inner panel that can be adjusted to your internal components and is easily removable for easy access to your kit  This is the pouch only, no contents are included.    

The M-FAK bag is a super-compact, 500 Denier nylon platform that opens from the side in a clamshell configuration utilizing (2) two main sleeves that open on both ends for easy access and features multiple elastic loops for secure gear organization.  The bag’s exterior includes a MOLLE backing for mounting in the standard vertical position as well as a 3 in. internal sleeve for accommodating horizontal attachment to your duty belt. The vertical mount can be set to open left-to-right or right-to-left based on shooter preference, while the horizontal mount on a belt allows opening directly to your C-A-T.® tourniquet.  Also included are a loop patch on front of the bag for custom user labeling and (3) three MOLLE strips to attach additional gear such as a TQ/Holder if needed.  This is the pouch only, no contents are included.    

The TacMed™ Convertible Drop Leg Pouch provides the medic/operator with maximum flexibility without compromising the ability to provide on target care. This pouch can be worn on the leg or attached to a MOLLE style vest depending on the users’ preference. This pouch is offered stocked based on different levels of medical capabilities. All kits can also be custom packed to meet your specific mission requirements. Dimensions: 9.5" x 9" x 2"

The ROO M-FAK Bag only is super compact, 500 Denier nylon bag features a unique front pouch that easily opens with the pull of a tab for rapid one handed access to your tourniquet (sold separately) without the need to open the full kit. Multiple elastic loops on the interior allow for secure gear organization, while it's rugged exterior includes a MOLLE style attachment for mounting in the standard vertical position as well as a 3 in. internal sleeve that accommodates horizontal attachment to your duty belt.  Features: Bag ONLY, contents not included One of our most compact, versatile Mini First Aid bags featuring rapid access front pouch 500 Denier nylon bag with interior elastic loops for secure gear organization Super compact, rugged nylon platform that allows attachment both vertically and horizontally MED CROSS Patch is sold separately.    

  Gen-2 FATPack 5x8 improvements: (1) external built-in tourniquet holders, (2) internal elastic holders for cylindrical items, (3) bottom pull tabs for easy closure, (4) covert MOLLE-Air structure. The FATPack (First Aid Trauma Pack) are a series of medical packs that offer volume-maximizing storage, and instant accessibility. Access your lifesaving contents with one intuitive downward pull! Available in three sizes: 4x6, 5x8, and 7x10. FATPack 5x8 is 8" (H) x 5.5" (W) x 3" (D). It is the perfect size for your IFAK, Blowout Kit, or trauma-based medical kit. Two external elastic holders secure tourniquets and shears for instant access. Elastic loops over high-viz ripstop pockets in the main compartment’s center and side flaps can secure cylindrical items (e.g. Epipen and airway tubes), saving you precious time when seconds count. User-configurable shock cord storage ladder on the front flap. Sturdy grab handle unzips dual #8 YKK zippers and hook-and-loop fastener. Low profile MOLLE-Air structure is MOLLE-compatible and can be used as loop ID panel for blood type or other patches. MOLLE back panel let you attach FATPack using MOLLE Sticks (*optional), or convert it to a hook-and-loop attachment using the MOHL-Air adapter panel (*optional). FATPack’s versatility will make sure your lifesaving gear goes wherever you go! Specs & Features NEW: Lightweight MOLLE-Air modular attachment structure with loop surface NEW: Three internal elastic webbing bands with two slots for cylindrical items (ex. EpiPen, tube) NEW: Two external elastic slots for holding tourniquet or shears (per side) NEW: Formed grab handle for fast opening with removable red ‘medical’ indicator NEW: Bottom pull tabs for easier closure Size: 8" (H) x 5.5" (W) x 3" (D) Weight: 5.4 ounces Four internal high-vis ripstop storage pockets User-configurable storage ladder with shock cord retention 2” (H) x 3” (W) ID/Blood type loop patch panel on front MOLLE/PALS webbing on rear for modular attachment Compatible with MOLLE Sticks & MOHL-Air adapter for loop panel attachment Includes 2 one-wrap hook & loop anchors for gear retention Materials: 1,000-D Cordura® fabric with water-repellent DuPont® Teflon® fabric protector Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon interior Durable & abrasion resistant RC-Class YKK® #8 zippers, reversed for protection Circular user-friendly paracord zipper loops High tensile strength nylon webbing and binding tapes Finished with high tensile strength bonded nylon thread

The Laser Cut C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of laser cut laminated Cordura nylon. With an innovative construction process this tourniquet holder weighs 50% lighter than traditional nylon TQ holders. The included snap-free PALS/MOLLE-style connectors ensure secure attachment to a duty vest, gear or belt (mounted vertically). To keep your C-A-T® TQ protected from the elements the Laser Cut C-A-T® Holder has an integrated cover with easy-open elastic pull tab. Features: Constructed with laser cut laminated Cordura®nylon Easy Pull Elastic Cover PALS/MOLLE-style connections Accommodates GEN 6 and GEN 7 C-A-T® tourniquets Weighs less than traditional TQ holders No brass snaps or grommets to wear-out Super durable, yet 50% lighter than traditional nylon TQ holders Designed & built to easily integrate with new, US DoD laser-cut body armor (PCG3 and MSV) yet “backwards compatible” will easily mount to legacy-type MOLLE vests Laser-Cut “TQ” with contrasting background color 4 ea. front-mounted, laser cut MAPs (MOLLE Attachment Points) for “stacking”. Can easily stack or mount 2 pouches together saving precious plate carrier real-estate Deploys easily with one hand, integrated cover with snug, elastic pull-tab C-A-T® TQ sold separately NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

Gen-2 FATPacks 7x10 improvements: (1) internal elastic holders for cylindrical items, (2) redesigned front flap organization, (3) low profile MOLLE-Air structure. The FATPack (First Aid Trauma Pack) are a series of medical packs that offer volume-maximizing storage, and instant accessibility. Access your lifesaving contents with one intuitive downward pull! Available in three sizes: 4x6, 5x8, and 7x10. A collaboration with Ken Harper @ Prepare-1, the FATPack 7x10 is 10” (H) x 7.5” (W) x 3.5” (D). It is the perfect size for group FAK, blowout kit, or trauma-based medical kit. It can pack a full range of medical supplies from a full-size SAM splint, elastic bandages, ice packs for immobilization, to medical instruments, tourniquets, hemostats, burn treatment, pressure dressings, etc. Elastic loops over high-viz ripstop pockets in the main compartment’s center and side flaps can secure cylindrical items (e.g. Epipen and airway tubes), saving you precious time when seconds count. Improved shock cord storage ladder on the front flap with a removable fold-out window zipper pocket (7.5” W x 5.5” H) for small items. Exterior MOLLE/PALS provides quick access to high-priority items. A large slip pocket with MOLLE-Air structure can be used as loop ID panel for blood type or other patches. Sturdy grab handle unzips dual #8 YKK zippers and hook-and-loop fastener. MOLLE back panel let you attach FATPack using MOLLE Sticks (*optional), or convert it to a hook-and-loop attachment using the MOHL-Air adapter panel (*optional). FATPack’s versatility will make sure your lifesaving gear goes wherever you go! Specs & Features NEW: Lightweight MOLLE-Air modular attachment structure with loop surface NEW: Three internal elastic webbing bands with two slots for cylindrical items NEW: Formed grab handle for fast opening with removable red ‘medical’ indicator NEW: Bottom pull tabs for easier closure Size: 10” (H) x 7.5” (W) x 3.5” (D) Weight: 8 ounces External Front Pocket: 8” (H) x 5” (W) User-configurable storage ladder with shock cord retention Grab handle instantly opens FATPack with one downward pull, giving full access. Removable fold-out storage pocket with window (7.5” (W) x 5.5” (H) 5” (H) x 2” (W) ID/Blood type loop patch panel on front MOLLE/PALS webbing on sides and rear for modular attachment Compatible with MOLLE Sticks & MOHL-Air adapter for loop panel attachment Includes 2 one-wrap hook & loop anchors for gear retention. Materials:1,000-D Cordura® fabric with water-repellent DuPont® Teflon® fabric protector. Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon interior. Durable & abrasion resistant RC-Class YKK® #8 zippers, reversed for protection. Circular user-friendly paracord zipper loops. High tensile strength nylon webbing and binding tapes. Finished with high tensile strength bonded nylon thread.

The Gen 7 C-A-T® RIGID TQ Case with Cover was designed to provide personnel with the capability to carry and protect their life-saving Gen 7 C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The Case Cover completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Injection Molded Nylon Case provides strength and durability as it holds the C-A-T® Tourniquet tightly in place. When deployed, the cover "breaks apart" so there is no snagging on your tourniquet and allows for easy and quick deployment of the C-A-T®. Includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The RIG Series Eagle IFAK is a new low profile individual first aid platform designed with a protective hood and quick latch release to keep your life-saving equipment protected and rapidly accessible for deployment. Highlighted design advancements include easy-one hand quick release hood latch and zippers, detachable inner shock cord panel that detaches from the IFAK bag and attachment system that allows both vertical (MOLLE backing) and horizontal (3 in. belt loop) carriage orientations.

Always have the Gen 7 C-A-T® within easy reach, yet keep it protected in a rigid holder capable of withstanding foot pursuits, combative subjects and daily patrol functions without allowing it to fall out of the carrier The Gen 7 C-A-T® RIGID TQ Case® was designed to provide personnel with the capability to carry the life-saving C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The case is made from Injection Molded Nylon whic provides strength and durability as it holds the Gen 7 C-A-T® Tourniquet tightly in place.  The case design allows it to be used with no straps or covers so that the tourniquet can be quickly and easily removed by grabbing and pulling the top part of the C-A-T® Tourniquet. The case also includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The TacMed™ Uniformed Medical Kit (UMK) 2nd Generation builds upon the success of the first generation UMK. The UMK 2nd Gen greatly decreases the signature of the device over the original by moving the medical gear and pockets behind a flat panel, eliminating any imprinting under the officer's duty shirt. In addition, the UMK 2nd Gen increases comfort and durability as it reduces the thickness of the device with a new material that stretches to the shape of the officer's vest.  The new design allows the UMK 2nd Gen to fit ANY concealed body armor carrier that utilizes hook and loop straps, plus the sides can be trimmed for a custom fit. The UMK 2nd Generation is designed to carry the SOF® Tactical Tourniquet-Wide with additional pockets designed to carry a set of chest seals, hemostatic agent, and the Esmark Bandage, or similarly sized components. Benefits of the UMK 2nd Generation: New design adapts the device to fit a wide variety of body types New design features an even lower profile... No imprinting under the officer's duty shirt! Central placement provides the officer instant ambidextrous access to their medical kit Allows the uniformed officer to carry a complete medical kit on them at all times Creates instant recognition among officers of the placement of medical gear Instant access to trauma gear saves precious time, allowing the officer to provide self-aid and responding officers to provide buddy-aid in the case of a serious injury.  The kit as priced does not come with any components, all sold separately.

5.11 UCR IFAK & Magazine Thigh Rig Just the essentials. Ideal for carrying 1-2 blow- out kits and a pair of AR magazines, the 5.11 UCR IFAK & Magazine Thigh Rig features a drop-down zippered compartment with a light-colored interior, bungee tie-downs, and MOLLE and web platform- compatibility. The 5.11 UCR IFAK & Magazine Thigh Rig is crafted from 1050 D nylon, with breathable aerospace mesh on the back, this useful rig will faithfully go where you lead. Mainly because it's attached it to you. FEATURES:  The 5.11 UCR IFAK & Magazine Thigh Rig can carry 4 AR magazines 5.11® TacTec System™ compatible main compartment Front laser-cut platform for accessories or morale patches Drop front opening for access 1050D Nylon fabric resists tears Adjustable/removable thigh strap Durable Duraflex® hardware YKK® self-healing zippers Imported   

Pack does not come with any medical products, they are shown for display purposes only.  This version is a larger sized medic backpack than the standard version with intelligent and clear interior divider system. The TT Medic Assault Pack L MK II is now the third size of the tried and tested medic backpack from Tasmanian Tiger. The backpack is about 4 cm (one MOLLE strip) deeper than the two smaller models. It has laser-cut MOLLE on the front and sides. The bottom has attachments for a rescue blanket. The light, padded shoulder straps can be removed and stowed in a pocket with hook-and-loop panels on the back. The backpack can also be converted for plate carriers and vests using the straps supplied with it and the stowable carrying handles help to quickly transport it in emergencies. FEATURES: Removable shoulder carrying system that can be stored in the back if needed. Large handle for carrying when open. Inner detachable plate with elastic loops and internal variable fixation points to store medical equipment. Scissors bag Clear inside pockets identified by colored hook-and-loop fastening. Integrated visual markers. Laser-cut MOLLE system Comes with adapter straps for direct attachment to protective vests. Length adjustable stowable shoulder straps make carrying large body armor possible. VOLUME 19 Liters | 1159 Cubic Inches WEIGHT 60oz | 1.7kg DIMENSIONS 18 x 11 x 3.5in | 46 x 28 x 10cm MATERIAL CORDURA® 700 den

5.11 FLEX Tourniquet Pouch Being a first responder is a passion, not just a job description. Our Flex Tourniquet Pouch provides ready and unfailing access should the unthinkable happen. This pouch can be mounted vertically utilizing the 5.11® FLEX-HT™️ Mounting System or horizontally using integrated hook/loop straps on MOLLE platforms as well as multiple angles on HEXGRID®. The Flex Tourniquet Pouch also features a tuckable hook/loop flap for a drop-down plate carrier attachment. Elastic compression webbing keeps everything secure during high-speed movement and the Hypalon® pull tab ensures quick opening when seconds count. Imported.  DIMENSIONS 6.0”H x 2.0”L x 1.5”DWeight 0.08kg NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The Gen 7 C-A-T® RIGID TQ Case with Cover was designed to provide personnel with the capability to carry and protect their life-saving Gen 7 C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The Case Cover completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Injection Molded Nylon Case provides strength and durability as it holds the C-A-T® Tourniquet tightly in place. When deployed, the cover "breaks apart" so there is no snagging on your tourniquet and allows for easy and quick deployment of the C-A-T®. Includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The MED-TAC Drop Leg Tactical Medic Pouch is designed to universally attach to your leg and belt via ballistic nylon webbing with non-slip stitching. Additionally, it can also attach to any MOLLE compatible gear, vest, or bag with at least 4 rows of loops. The front is designed with a laser-cut compartment for storing a permanent marker or tactical flashlight, as well as a pocket and webbing loop to hold a pair of trauma shears. The inside features 13 elastic loops with webbing pull tabs, and one nylon pocket for storing items like chest seals, ABD pads, or burn dressings. The entire bag is made of extra strong 1000 denier nylon. Includes a limited lifetime warranty from Lightning X Products. The back comes fully stocked with contents listed in the description Can be used as a drop leg IFAK or also attached to any MOLLE compatible gear, vest, or bag Laser-cut compartments on front for trauma shears and permanent marker Inside features 13 elastic loops with webbing pull tabs and one nylon pocket Made of 1000 denier nylon and includes limited LIFETIME WARRANTY.

The C-A-T Elastic TQ Holder from North American Rescue was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest, gear or belt for rapid and easy access. It is made of 500D IR Signature Reduced Nylon with MOLLE/PALS-style connectors with end tuck instead of button snap. The Elastic Holder protects your tourniquet from the elements and has an easy-open hood design to completely clear the TQ for removal up down or outward. NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

Tasmanian Tiger IFAK Pouch  The pouch does not come with any medical products, they are shown for display purposes only. The TT IFAK pouch is a MOLLE mounted First Aid Kit pouch designed with a quick access system. It can be mounted on the back of a vest, pack, or belt and allows the user to carry a large amount of medical gear to address many problems within the MARCH algorithm of TCCC. A shock-cord mounting system housed on a solid panel with gear loops on the other side allow for a customized loadout in accordance with the user's needs. FEATURES: Opens out, with hook-and-loop fastening Pull out panel for individual loading Can also be used with 50mm belts MOLLE System Requires 6 MOLLE loops  WEIGHT 9oz | 250g DIMENSIONS 9 x 6 x 2in | 24 x 16 x 5.5cm MATERIAL CORDURA® 700 den

Pouch comes empty - the medical contents are not included and shown for demonstration purposes only. The MEDIC-X MOLLE Medic pouch is designed for use as an IFAK (Individual First Aid Kit) or similar application. It features thick double layer webbing bars in the rear that can attach to any other bag, backpack or vest with MOLLE platform. The front features a series of webbing loops as well as a hook and loop patch for a nameplate or morale patch as well as elastic cording with a drawstring clasp. The interior features 8 elastic storage loops, a mesh pocket, and a fully enclosed zippered pocket – plus a grommet for drainage. The interior also includes a drawstring cording platform designed to hold the pouch at a 90-degree angle when in the open position – which aides in one-handed use as well as keeping supplies secure. The top of the pouch is complete with a padded handle and two D-ring accessory loops. Includes a limited lifetime warranty from Lightning X Products. Attaches to any bag, backpack or vest with MOLLE platform 8 interior elastic loops 2 pockets Drawstring cording system lets you control how far the pouch opens Hook & loop nameplate padded handle and D-rings Measures 8″(H) x 6.5″(W) x 3″(D)

The standard casualty response bag which meets the requirements for the SAR Level A Medical Bag. Designed to meet the rigorous requirements of the U. S. Navy Search and Rescue (SAR) Swimmers.  Ergo dynamic, low profile & durable casualty response bag constructed of Berry Amendment 500D CORDURA® solution dyed nylon with GhillieTEX™ hardware for near IR signature reduction and sand/water resistant, self-repairing zippers with silent 550 cord pulls. Featuring 6 hook-and-loop internal pouches in various sizes which can be self-labeled for the specific mission set; 4 smaller pouches for hemorrhage control products and 2 larger ones to accommodate airway & intravenous products.  Pouches are designed for quick access to the medical equipment necessary to respond to specific life-threatening medical emergencies. Pouches attach via hook-and-loop to allow the first responder to remove the specific pouch needed to provide on-scene medical care to the patient.  Slim-line, low-profile bag is securable using anti-pilferage seals to protect all medical components inside the bag. The kit can be carried as a backpack using shoulder straps that stow away until needed.  SPECIFICATIONS: Meets the requirements for the SAR Level A Medical Bag Ergo dynamic, low profile & durable casualty response bag constructed of Berry Amendment 500D CORDURA® solution dyed nylon GhillieTEX™ hardware for near IR signature reduction and sand/water resistant, selfrepairing zippers with silent 550 cord pulls Featuring 6 hook-and-loop internal pouches in various sizes which can be self labeled for the specific mission set; 4 smaller pouches for hemorrhage control products and 2 larger ones to accommodate airway & intravenous products  KIT CONTENTS: 1 x Bag (CCRK® - NAR-5 SAR Aid) 4 x NAR PPE Kit™ (Personal Protection Equipment Kit) 4 x C-A-T® (Combat Application Tourniquet®) 4 x NAR Compressed Gauze 4 x ETD™ 4 in. Emergency Trauma Dressing 1 x ETD™ Abdominal Emergency Trauma Dressing 4 x HyFin® Vent Twin Pack Chest Seal 1 x Cyclone® New & Improved BVM 1 x CPR Mask 4 x Triangular Bandage 4 x 3 in. Elastic Wrap Bandage 2 x Cervical Collar 2 x SAM® Splint II 1 x Roll Surgical Tape (1 in.) 1 x Trauma Shears (7.25 in.) 1 x Sterile Burn Sheet (60 x 96 in.) 12 x Flexible Fabric Bandages 1 x Survival Blanket 2 x 1000cc IV Solution 1 x Mini Maglight with batteries  DIMENSIONS H 24 in. x W 15 in. x D 7 in. Weight: 16 lb 10 oz  

 Gen-2 FATPack 4x6 improvements: (1) external built-in tourniquet holders, (2) internal elastic holders for cylindrical items, (3) bottom pull tabs for easy closure. FATPack (First Aid Trauma Pack) is a series of medical packs that offer volume-maximizing storage, and instant accessibility. Access your lifesaving contents with one intuitive downward pull! Available in three sizes: 4x6, 5x8, and 7x10. FATPack 4x6 is 6" (H) x 4.5" (W) x 3" (D). It is the perfect size for your IFAK, Blowout Kit, or trauma-based medical kit. Two external elastic holders secure tourniquets and shears for instant access. Elastic loops over high-viz ripstop pockets in the main compartment’s center and side flaps can secure cylindrical items (e.g. Epipen and airway tubes), saving you precious time when seconds count. User-configurable shock cord storage ladder on the front flap. Sturdy grab handle unzips dual #8 YKK zippers and hook-and-loop fastener. Loop ID panel for blood type or other patches. MOLLE back panel let you attach FATPack using MOLLE Sticks (*optional), or convert it to a hook-and-loop attachment using the MOHL-Air adapter panel (*optional). FATPack’s versatility will make sure your lifesaving gear goes wherever you go! Specs & Features NEW: Three internal elastic webbing bands with two slots for cylindrical items (ex. Epipen, tube) NEW: Two external elastic slots for attaching tourniquet or shears (per side) NEW: Formed grab handle for fast opening with removable red ‘medical’ indicator NEW: Bottom pull tabs for easier closure Size: 6" (H) x 4.5" (W) x 3" (D) Weight: 4.2 ounces Four internal high-vis ripstop storage pockets User-configurable storage ladder with shock cord retention. 2” (H) x 3” (W) ID/Blood type loop patch panel on front. MOLLE/PALS webbing on rear for modular attachment. Compatible with MOLLE Sticks & MOHL-Air adapter for loop panel attachment. Includes 2 one-wrap hook & loop anchors for gear retention. Materials:1,000-D Cordura® fabric with water-repellent DuPont® Teflon® fabric protector. Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon interior. Durable & abrasion resistant RC-Class YKK® #8 zippers, reversed for protection. Circular user-friendly paracord zipper loops. High tensile strength nylon webbings and binding tapes. Finished with high tensile strength bonded nylon thread.

The FATPack (First Aid Trauma Pack) is a series of medical packs that offer volume-maximizing storage, and instant accessibility. The FATPack-Pro is the perfect bag for a Mass Casualty Incident (MCI) kit or trauma-based medical kit. The FATPack-Pro is capable of supporting a variety of load-out options that go well beyond just trauma kit variations with it's intuitive and practical layout. There is one flat zippered pocket a Loop ID panel 4.5" (W) x 3" (H) and two bandage shear sheaths with a large RED pull handle make the front of the bag. Side MOLLE and elastic webbing offer storage for extra tourniquets or pouches. The bag features dual layers of Elastic loop over high-viz ripstop pockets in the main compartment which provide quick access storage for multiple trauma supplies. Items such as tourniquets, wound packing gauze, pressure bandages, chest seals, and airway management tools will fit securely and prominently - saving you precious time when seconds count. Three vinyl mesh zippered pouches with content label windows offer additional storage of injury specific gear or PPE items. Both the three zippered pocket and lower elastic loop panels are removable. The FATPack-Pro is a compact 15” (H) x 10” (W) x 5.5” (D), single layer convertible sling pack that bridges the gap between sling and backpack by converting from a sling into a two-shoulder bag with two included removable quick adjustment straps. Rear MOLLE/PALS allow direct attachment to the back of plate carriers, chest rigs etc . Sturdy top grab handles help to quickly unzip dual #10 YKK zippers. The lightweight and sturdy 500-D Mil-grade Cordura® fabric treated with Durable Water Repellent (DWR) provides excellent protection from the elements. The FATPack-Pro offers a compact and minimalist setup that is weather-protected and ready for the toughest environments. The application flexible interior allows for a variety of uses beyond just MCI kits. Use of the interior and exterior compartments can be tailored to a wide range of skill sets and staging needs based on mission and role. Specs & Features Net weight: 2.3 lbs (w/2 straps) | 1043 grams Total Capacity: 12 Liters Overall Exterior (Fully Extended): 15” (H) x 10” (W) x 5.5” (D) Main Compartment (Interior): 14.5" (H) x 9.75" (W) x 3.5" (D) Main Compartment zippered pocket (Interior): 13.5" (H) x 8.5" (W) x 1.75" (D) Removable Panel A (Overall): 13” (H) x 6” (W) | Elastic loops: (Two) 7.5” (W) and (Four) 4.25” (W) Removable Panel B (Overall): 13.5” (H) x 9.5” (W) | Zippered pockets: (Three) 8.5” (W) x 3.75” (H) x 2.25” (D) Dual reinforced top grab handles Front Trauma shear holsters (Two) Loop ID/ Moral panel: 3” (H) x 4.5” (W) Zippered top pocket: 4.5” (H) x 7.75” (W) Clamshell opening Removable shoulder straps with Large rear MOLLE panel Loop lined interior for customizable organization Materials: 500-D Mil-grade Cordura® fabric treated with Durable Water Repellant Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Durable RC-Class YKK® lockable zippers, reversed for protection Mil-grade ITW® and UTX-Duraflex® hardware made from high tensile strength Acetal polymer Spartan zipper pulls Vinyl Mesh laminate easy to clean High tensile strength nylon webbing and binding tape Finished with high tensile strength bonded nylon thread  

Shears are not included and are for display only The NAR Medic/Leg Kit Bag is a full featured drop leg pouch with a myriad of elastic storage loops keep items in place until needed, creating the perfect storage solution for rapid access and organization. The Medic/Leg Rig bag comes standard with 500D CORDURA® Solution-Dyed Nylon with built in Near Infrared Signature Reduction as well as sand and water resistant zippers with silent pulls. Available in NAR’s 11 point Berry Amendment Nylon Standard.

The bag comes empty from the factory - pictures show the interior layout and carrying capacity.   The Tasmanian Tiger Vehicle Headrest IFAK Pouch allows you to carry a First Aid kit with a quick access system for fast retrieval. It is designed for attaching to the back of the car seat headrest on the driver's seat or the passenger's seat. The panel with individually configurable loops can be removed by the handle from the right or the left. Part of the TacVec series.The TT Head Rest IFAK received a Silver Score in the 2020 NTOA Member Tested and Recommended Program. Reviewed by law enforcement officers in the National Tactical Officers Association (NTOA), the TT Head Rest IFAK received an overall score of 4.24 out of 5.FEATURES: Opens out, with hook-and-loop fastening Inclusive Hook-and-loop patch for color-marked attaching straps can be written on Both sides removable, individually configurable panel Length-adjustable fastening system for car seat headrests Suitable for headrests with a vertical circumference of approx. 21-25in/53-63cm Including hook-and-loop adapter for use on bigger headrests   

The pouch comes empty- photos are just to show its carrying capacity The MEDIC-X Quick Access Medic Pouch is a tactical accessory pouch that is ideal for use as an IFAK (Individual First Aid Kit). This pouch is designed more specifically to hold bulkier items that would be required to treat a gunshot wound. It features a dual zipper quick drop front panel that lays flat when opened. This panel has 4 vertical and 4 horizontal elastic loops to secure smaller items. The interior of the main compartment has 2 wider elastic loops (for a total of 10), four pockets and an elastic drawstring panel that can be adjusted to fit the size of the contents. The exterior has nylon webbing MOLLE loops on all four sides and two retention straps on the rear for attaching the pouch to a larger bag or belt loop. Overall dimensions are 8″(H) x 5.5″(W) x 4″(D). This pouch includes a limited lifetime warranty from Lightning X.

The S.T.O.R.M. Operator IFAK pouch is one of our smallest Improved First Aid Kits (IFAK) that was specifically designed to allow you to carry items in order to mitigate the three leading causes of preventable death in the tactical environment for penetrating trauma (60% extremity bleeding, 33% tension pneumothorax, 6% airway obstruction).  This kit pouch provides the necessary layout to carry equipment that the user/operator to administer immediate self-aid/buddy-aid to injured casualties at the point of wounding.  Utilizing Tactical Combat Casualty Care (TCCC) Guidelines and lessons learned from the battlefield, this pouch (when fully stocked) can provide law enforcement officers and other public safety personnel with the needed tools to reduce the unnecessary loss of life due to the preventable causes of death encountered in the tactical environment.  Made to meet the demands of the austere environment, our modular system can be worn as a drop-down leg rig, attached directly to the duty belt or attached to the assault vest or body armor with MOLLE/PALS-style connectors.  This is the pouch only, no contents are included.    

 Utilizing Tactical Combat Casualty Care (TCCC) Guidelines and lessons learned from the battlefield, this pouch (when fully stocked) can provide law enforcement officers and other public safety personnel with the needed tools to reduce the unnecessary loss of life due to the preventable causes of death encountered in the tactical environment.  This specially designed rugged nylon bag attaches easily with MOLLE/PALS style attachment to the assault vest or body armor. Streamlined and compact, this carrying option comes in your choice of 5 different color options.  Available in NAR’s 11-point Berry Amendment Nylon Standard.  This is the pouch only, no contents are included.    

Storage of essential equipment is a challenge for patrol officers or individuals working low-vis or plain-clothed operations. The TacMed™ Tourniquet Ankle Holster allows the operator/officer to comfortably and discreetly wear a SOF® Tactical Tourniquet on either leg in virtually any mode of dress. Positioning the tourniquet on the ankle allows rapid access with either hand in the event of a shooting. The design of the holster allows the tourniquet to be removed from the pouch in seconds with one hand, yet is secure enough to run with and not risk the tourniquet falling out of the holster.    Dimensions: 4x 14.5" (one size fits most)

 The Modular 30 Pack features a Laser Cut MOLLE System which allows this pack to be used as a universal combat backpack in any configuration. The backpack has a lid pocket and laser-cut MOLLE on the sides and front. The front opening of the backpack pulls up completely. The insides have hook-and-loop sections for individual features. The hip fins are detachable and the pack comes with three hook-and-loop fastening accessories pouches and a hook-and-loop weapon holster. The main compartment of the backpack can be opened completely from the front or back side, and the hook and loop partition can be removed all together if need be. The back and side panels of the main compartment feature MOLLE hook and loop patches for customizable configurations. NOTE: The pack does come with these medic pouches show, but they can be purchased separately allowing you to convert this pack into a full-fledged medic pack in less than 1 minute.     FEATURES: Padded Back Carrying System Length adjustable shoulder straps Detachable padded hip fins with zipped pockets Side compression on the inside Lid pocket Lid pocket with small organizer Zigzag rubber lacing Antenna ports into the main compartment Includes 3 hook-and-loop fastening accessories pouches Includes weapon holster (hook-and-loop fastening) Laser Cut MOLLE System MOLLE hook-and-loop on the inside for limitless modularity  VOLUME 30 Liters | 1,831 Cubic Inches WEIGHT 69oz | 1.95kg DIMENSIONS 18 x 12 x 7in | 46 x 30 x 18cm MATERIALS CORDURA® 700 den (Multicam 500 den)

The standard casualty response bag which meets the requirements for the SAR Level A Medical Bag. Designed to meet the rigorous requirements of the U. S. Navy Search and Rescue (SAR) Swimmers. Ergo dynamic, low profile & durable casualty response bag constructed of Berry Amendment 500D CORDURA® solution dyed nylon with GhillieTEX™ hardware for near IR signature reduction and sand/water resistant, self repairing zippers with silent 550 cord pulls. Featuring 6 hook-and-loop internal pouches in various sizes which can be self labeled for the specific mission set; 4 smaller pouches for hemorrhage control products and 2 larger ones to accommodate airway & intravenous products.  Designed to be hung in aircraft or other transport vehicle by top bag handle.  SPECIFICATIONS: NATO NSN: 8465-01-669-5796 Designed to be hung in aircraft or other transport vehicle by top bag handle Ergo dynamic, low profile & durable casualty response bag constructed of Berry Amendment 500D CORDURA® solution dyed nylon GhillieTEX™ hardware for near IR signature reduction and sand/water resistant, selfrepairing zippers with silent 550 cord pulls Featuring 6 hook-and-loop internal pouches in various sizes which can be self labeled for the specific mission set  DIMENSIONS H 24 in. x W 15 in. x D 7 in. Weight: 5 lb 10 oz  

The FATPack (First Aid Trauma Pack) are a series of medical packs that offer volume-maximizing storage, and instant accessibility. A collaboration design with Urban Medical Gear LLC, the FATPack-Pro is the perfect bag for a Mass Casualty Incident (MCI) kit or trauma-based medical kit. The FATPack-Pro is capable of supporting a variety of load-out options that go well beyond just trauma kit variations with it's intuitive and practical layout. One flat zippered pocket a Loop ID panel 6.5" (W) x 3" (H) and two bandage shear sheaths with a large RED pull handle make the front of the bag. Side MOLLE and elastic webbing offer storage for extra tourniquets or pouches. Dual layers of Elastic loop over high-viz ripstop pockets in the main compartment provide quick access storage for multiple trauma supplies. Items such as tourniquets, wound packing gauze, pressure bandages, chest seals, and airway management tools will fit securely and prominently - saving you precious time when seconds count. Three vinyl mesh zippered pouches with content label windows offer additional storage of injury specific gear or PPE items. Both the three zippered pocket and lower elastic loop panels are removable. FATPack-Pro is a compact 13.5” (H) x 9” (W) x 4.75” (D), single layer convertible sling pack that bridges the gap between sling and backpack by converting from a sling into a two-shoulder bag with two included removable quick adjustment straps. Rear MOLLE/PALS allow direct attachment to the back of plate carriers, chest rigs etc. Sturdy top grab handles help to quickly unzip dual #10 YKK zippers. 500-D Mil-grade Cordura® fabric treated with Durable Water Repellent (DWR) for protection from the elements. The FATPack-Pro offers a compact and minimalist setup that is weather-protected and ready for the toughest environments. The application flexible interior allows for a variety of uses beyond just MCI kits. Use of the interior and exterior compartments can be tailored to a wide range of skill sets and staging needs based on mission and role. Features:  Net weight: 2.1 lbs (w/2 straps) | 952 grams Total Capacity: 9 Liters Overall Exterior (Fully Extended): 13.5” (H) x 9” (W) x 4.75” (D) Main Compartment (Interior): 12.75" (H) x 9" (W) x 3.5" (D) Main Compartment zippered pocket (Interior): 12.75" (H) x 7.5" (W) x 1.75" (D) Removable Panel A (Overall): 11.5” (H) x 5” (W) | Elastic loops: (Three) 4.75” (W) Removable Panel B (Overall): 12” (H) x 8.5” (W) | Zippered pockets: (Three) 8” (W) x 3.25” (H) x 2.25” (D) Dual reinforced top grab handles Front Trauma shear holsters (Two) Loop ID/ Moral panel: 2.5” (H) x 4.25” (W) Zippered top pocket: 4” (H) x 6.75” (W) Clamshell opening Removable shoulder straps with Large rear MOLLE panel Loop lined interior for customizable organization Materials: 500-D Mil-grade Cordura® fabric treated with Durable Water Repellant Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Durable RC-Class YKK® lockable zippers, reversed for protection Mil-grade ITW® and UTX-Duraflex® hardware made from high tensile strength Acetal polymer Spartan zipper pulls Vinyl Mesh laminate easy to clean High tensile strength nylon webbing and binding tape Finished with high tensile strength bonded nylon thread

Medical supplies are shown for demo purposes only and not included This is a true tactical medic rescue backpack with a wide variety of uses and the ability to transform to multiple configurations for maximum flexibility.  The main compartment is fully padded with closed cell foam for protection.  All internal pockets are held in place by VELCRO® and are removable.  The front and sides of the pack are equipped with the PALS (Pouch Attachment Ladder System) a grid of webbing sewn onto the load bearing equipment and corresponds with straps on the attachment.  The straps are interwoven between the webbing on each side of the two pieces and snapped into place, making for a very secure fit which can be detached with moderate effort.  The backpack has a web carrying handle on both the top and side.  A false back allows for storage of shoulder straps when not in use.  Made of Cordura nylon with #10YKK heavy duty Aquaguard water repellent zippers with PV coating and pull tab.  All seams and stress points are sewn with #69 dacron thread.  This pack will hold a "C" or "D" size oxygen tank or may be rearranged without an oxygen tank.  The pack is compatible with any Velcro backed pouch and any MOLLE/PALS pouch can be attached to the modular grip Proudly made in Ohio since 1971 with materials made in the USA. 

Medical supplies are shown for demo purposes only and not included This is a true tactical medic rescue backpack with a wide variety of uses and the ability to transform to multiple configurations for maximum flexibility.  The main compartment is fully padded with closed cell foam for protection.  All internal pockets are held in place by VELCRO® and are removable.  The front and sides of the pack are equipped with the PALS (Pouch Attachment Ladder System) a grid of webbing sewn onto the load bearing equipment and corresponds with straps on the attachment.  The straps are interwoven between the webbing on each side of the two pieces and snapped into place, making for a very secure fit which can be detached with moderate effort.  The backpack has a web carrying handle on both the top and side.  A false back allows for storage of shoulder straps when not in use.  Made of Cordura nylon with #10YKK heavy duty Aquaguard water repellent zippers with PV coating and pull tab.  All seams and stress points are sewn with #69 dacron thread.  This pack will hold a "C" or "D" size oxygen tank or may be rearranged without an oxygen tank.  All pockets have a VELCRO® FlexBadge label system for quick and easy labeling of accessory pouches and the main pack. This is available in black or coyote tan. Each pack has overall dimensions of 11"W x 20"H x 6"D. The side Molle pockets have dimensions of 6.5"H x 4"W x 2.5"D. The top front Molle pocket has a dimension of 10"W x 5"H x 3"D, and the lower front Molle pockets have dimensions of 5"W x 6"H x 3"D. Proudly made in Ohio since 1971 with materials made in the USA. 

The Belt Trauma Kit (BTK) with Combat Gauze® LE is an all-in-one kit that provides the essential equipment to control traumatic bleeding all within reach of your duty/pistol/personal belt. Fitting on a belt up to 2 inches wide, the BTK can be worn rotated 90º to make room for other gear. The Complete Belt Trauma Kit (BTK) which also includes the Combat Application Tourniquet® (C-A-T®) and its holder is also available.  BASIC KIT CONTENTS: 1x Combat Gauze® LE Hemostatic Dressing 1x Emergency Trauma Dressing – 4 in. Mini 1x HyFin® Vent Compact Chest Seal Twin Pack 1x pair Responder Nitrile Gloves, Large 1x Belt Trauma Kit Pouch, Black COMPLETE KIT CONTENTS: 1x C-A-T® Combat Application Tourniquet, Black 1x C-A-T® Holder, Black 1x Combat Gauze® LE Hemostatic Dressing 1x Emergency Trauma Dressing – 4 in. Mini 1x HyFin® Vent Compact Chest Seal Twin Pack 1x pair Responder Nitrile Gloves, Large 1x Belt Trauma Kit Pouch, Black NOTE: The BASIC Kit does NOT come with a CAT Tourniquet, the COMPLETE Kit does.  Both kits include Combat Gauze LE dressing.

The constant challenge of striking a balance between the increasing amount of equipment carried into battle and the need to optimize performance is the impetus behind this low-profile, load carriage platform for Tactical Healthcare Professionals. The NAR-4 Aid Bag is a low profile, load-carriage platform bag that is designed to attach directly to the body armor with four rapid attachment straps or it can be carried using shoulder straps which conveniently stow away until needed. Constructed of 500D CORDURA® Solution-Dyed Nylon with built-in Near Infrared Signature reduction, the NAR-4 Aid Bag is available in a range of popular colors. Available in NAR’s 11-point Berry Amendment nylon standard.  SPECIFICATIONS Configurable based on individual skill set and mission requirements Rapid access and organization is enhanced by segregated removable equipment pouches 500D CORDURA® Berry Amendment Nylon Bag with GhillieTEX™ hardware for a reduced IR signature Sand and water-resistant, self-repairing zippers with silent 550 cord pulls PALS/MOLLE-style attachment system on front and side  DIMENSIONS: Cased Closed: H 19 in. X W 15 in. X D 7 in.

The pouch comes empty- photos are just to show its carrying capacity The MEDIC-X Quick Access Medic Pouch is a tactical accessory pouch that is ideal for use as an IFAK (Individual First Aid Kit). This pouch is designed more specifically to hold bulkier items that would be required to treat a gunshot wound. It features a dual zipper quick drop front panel that lays flat when opened. This panel has 4 vertical and 4 horizontal elastic loops to secure smaller items. The interior of the main compartment has 2 wider elastic loops (for a total of 10), four pockets and an elastic drawstring panel that can be adjusted to fit the size of the contents. The exterior has nylon webbing MOLLE loops on all four sides and two retention straps on the rear for attaching the pouch to a larger bag or belt loop. Overall dimensions are 8″(H) x 5.5″(W) x 4″(D). This pouch includes a limited lifetime warranty from Lightning X.

The TacMed™ Solutions Operator IFAK is a compact kit that provides the same capability offered by the Ballistic Response Pack in a more compact, streamlined design. Its well laid out interior and full zip opening allow rapid easy access to all components.  THIS IS THE POUCH ONLY, NO CONTENTS ARE INCLUDED Some colors pictured have been discontinued. Dimensions: 6 ½" x 4 ½" x 3" Orange color is discontinued, if you have a requirement for an Orange pouch, let us know and we'll contact TMS and see if any are left!

TacReady Headrest Pouch Designed to attach to your vehicle's headrest or any MOLLE or web platform, 5.11®'s UCR IFAK Pouch lets you keep 1-2 blow-out kits or medical essentials within arm's reach. The pouch features a drop-down zippered compartment with a light-colored interior for easy equipment identification, and bungee tie-downs for added stability. it's nice to know you've got it all right there. Ready to go.

The bag comes empty from the factory - video shows the interior layout and carrying capacity.   We'll help you get set up with the best loadout for your needs. The new MB15 MedSling packs are versatile shoulder bags with a practical design and a tactical feel that can be used in multiple real-world applications for military, law enforcement, EMS, Rescue Task Forces, special events first-aid, gun range, hiking, fishing or as a general day bag. The MB15 fits over one shoulder with an adjustable, ergonomic padded shoulder strap, which is also removable with two quick-release buckles. Each side flap, main cover and two side compartments include nylon webbing molle loops which provide multiple options for attaching gear and storing tools. The pack features a set of three rows of molle loops in the front, which are covered in hook & loop material for attaching nameplates and custom patches. The main compartment opens to reveal four elastic mesh pouches, two zippered pockets, three pencil pouches and three elastic loops. Two dual-zippered side compartments will hold a standard water bottle, but also include mesh pouches and elastic loops so they can be customized to fit the user's needs. This bag has so many more features, there are just a few: Strategically placed ergonomic mesh pads on the rear provide padding from the weight of the bag and also allow for air to flow through the main channel to minimize perspiration Two webbing loops on the main flap attach with metal snaps and hook & loop material for hanging keys, tape or other gear Front and top flaps include quick-access zippered pockets for concealment or storage of often-used items Large zippers include nylon webbing zipper pulls for easy use, even with a gloved hand The main compartment features two half-inch drainage grommets which prevent pooling of spilled liquids or accumulation of dirt Rear flap has anti-sway loop which can also be attached and used as a belt loop Seams/edges of all flaps are reinforced with nylon web binding for long-lasting protection and a better appearance Inner compartments are lined with a 210 double wall coated nylon Available in Stealth Black, Desert Tan, Fluorescent Orange, Navy Blue and Red Main Dimensions – (less flap & strap) 14″ L x 6″ W x 9″ H