Noted as the best prehospital tourniquet in the February 2008 supplement of The Journal of Trauma The Fastest, Safest, Most Effective Prehospital Field Tourniquet WE SELL ONLY GENUINE North American Rescue CAT TOURNIQUETS that are BRAND NEW! Be wary of imitations, knockoffs, or older generations being sold on E-bay or Amazon.     The patented Combat Application Tourniquet (C-A-T) Gen. 7 is a true one-handed tourniquet proven to be 100% effective by the U.S. Army’s Institute of Surgical Research. Numerous tests held by various laboratories over several years have proved that the C-A-T®  can completely occlude blood flow of an extremity in the event of a traumatic wound with significant hemorrhage.The Combat Application Tourniquet (C-A-T) is operated by turning a durable windlass system that contains a patented free-moving internal band.  This combination has been proven to provide the physical force characteristics necessary to occlude blood flow.  This force is also known as true circumferential pressure to the extremity. Once the tourniquet is adequately tightened, bleeding will cease and the windlass can then be locked into place using the bilateral retaining clips. The tourniquet also features a windlass retention strap that secures via hook and loop over the retaining clips.  This strap can also be used to mark the tourniquet's application time for proper medical management at the definitive care facility. The Combat Application Tourniquet (C-A-T)  unique dual securing system is extremely easy to use under survival stress or where fine motor skills are compromised. PRODUCT ENHANCEMENTS: The Gen 7 features a single routing buckle for faster application, decreased blood loss, effective slack removal, fewer windlass turns. and simplified training with single protocol application standards. The windlass rod has been reinforced, now with increased diameter for enhanced strength and aggressive ribbing for improved grip The bilateral windlass clip allows for rapid windlass lock and added strength The enhanced windlass strap changed has been changed from white to tactical gray and sonic welded to clip for constant contact providing safe windlass security and a place to document the application time The stabilization plate has been reinforced with a beveled contact bar The signature red elliptical tip (Red Tip Technology®) provides visual cue during application The Gen 7 features the patented free-moving internal band for true evenly distributed circumferential pressure  DIMENSIONS:  Packaged: L 6.5 in. x W 2.4 in. x D 1.5 in. Open Length: 37.5 in. Weight: 2.7 oz  

THIS IS THE NEW AND IMPROVED SOF-T Version The SOF® Tourniquet Generation 4  is a true generational upgrade to the most effective tourniquet on the market and now comes with  distinct improvements which makes it easier, more effective, and faster to apply: The new Retention Clip virtually eliminates any risk of the windlass accidentally releasing after the tourniquet has been applied by locking the windlass in place. It makes the windlass easier to secure in one-handed applications, resulting in a faster application time, and doubles the security of the device in combination with the tri-ring during patient movements. The redesigned and longer 5.5" Windlass eases the process of securing the windlass into the clip and tri-ring, increasing the effectiveness of the dual retention system. It still maintains its distinct conical ends while being machined from a single piece of aircraft-grade aluminum bar stock and anodized to minimize the product's signature in a tactical environment. The Quick-Compression Buckle was added to the tourniquet during a previous update and makes for smoother buckle manipulation due to its rounded edges. This also allows for easier one-handed application and overall faster application time. They even found a way to Reinforce the tourniquet material, making the SOF-T-W a SOLID contender. The SOF-T-W  is comprised of high-strength, lightweight alloy component and its design allows the tourniquet to easily slide over a limb or, if the limb is trapped, the tourniquet can be rapidly disconnected and reconnected around the limb without rethreading the strap via the use of the quick-disconnect buckle.  This allows for easier training and better skill retention since once does not have to worry about looping or un-looping the device.. With one application method for both the arm and the leg, the Gen 4 is the easiest tourniquet to operate under stress, which can lead to reduced levels of blood loss and ultimately better quality patient care.The Gen 4 still maintains its true 1.5" tourniquet strap, providing a wider compression pattern than most standard tourniquets or tourniquets with a 1" constricting band moving through a 1.5" sleeve. The wider compression pattern results in additional arterial compression and increased patient comfort. Lastly, each tourniquet is shipped with two UV-resistant black rubber bands for mounting to your individual equipment.The SOF® Tourniquet Gen 4 is one of a few windlass tourniquets recommended for use by the Department of Defense, recommended for use by the Committee on Tactical Combat Casualty Care and Tactical Emergency Casualty Care,, and it is the tourniquet of choice for the American Red Cross. Elite military operators form around  world,use the SOF-T-W the largest police departments in the country to fire and EMS paramedics on the streets use the SOF-T-W, civilians in everyday public places just trying to be prepared also use the SOF-T-W..These customers chose the SOF® Tourniquet because it was the best option on the market. And now, the best tourniquet just got better. Made in the USA. U.S. Patent: 8,303,620 and D649,642 and 7,776,064 and patent pending. NSN #: 6515-01-587-9943 Latex-Free.  Noteworthy Upgrades in the New SOF® Tourniquet:   1) Performance Compression Band Completely redesigned webbing maximizes compression during the application process. At a true 1.5” width, the new performance material glides through the Rugged Buckle for quick, snag-free operation and minimizes loss of pressure over time after application. 2) Slack Indicator Wedge Stitched into the Performance Compression Band below the windlass. The contrasting wedge offers a visual confirmation you have pulled all excess slack from the band. This is a critical step for proper tourniquet application and results in fewer windlass rotations required to reach occlusion.  3) Rugged Buckle Engineered to remove excess slack in a single fluid motion. The buckle’s shape stabilizes the Performance Compression Band at any angle of engagement. The new Rugged Buckle is an advanced, lightweight composite design with superior strength over previous versions.

TacMed's standard MOLLE-compatible tourniquet case, similar to a flash bang pouch. This option comes with your color choice of SOF® Tourniquet Gen 4. The SOF® Tourniquet Generation 4  is a true generational upgrade to the most effective tourniquet on the market and now comes with  distinct improvements which makes it easier, more effective, and faster to apply: The new Retention Clip virtually eliminates any risk of the windlass accidentally releasing after the tourniquet has been applied by locking the windlass in place. It makes the windlass easier to secure in one-handed applications, resulting in a faster application time, and doubles the security of the device in combination with the tri-ring during patient movements. The redesigned and longer 5.5" Windlass eases the process of securing the windlass into the clip and tri-ring, increasing the effectiveness of the dual retention system. It still maintains its distinct conical ends while being machined from a single piece of aircraft-grade aluminum bar stock and anodized to minimize the product's signature in a tactical environment. The Quick-Compression Buckle was added to the tourniquet during a previous update and makes for smoother buckle manipulation due to its rounded edges. This also allows for easier one-handed application and overall faster application time. They even found a way to Reinforce the tourniquet material, making the SOF-T-W a SOLID contender. The SOF-T-W  is comprised of high-strength, lightweight alloy component and its design allows the tourniquet to easily slide over a limb or, if the limb is trapped, the tourniquet can be rapidly disconnected and reconnected around the limb without rethreading the strap via the use of the quick-disconnect buckle.  This allows for easier training and better skill retention since once does not have to worry about looping or un-looping the device.. With one application method for both the arm and the leg, the Gen 4 is the easiest tourniquet to operate under stress, which can lead to reduced levels of blood loss and ultimately better quality patient care.The Gen 4 still maintains its true 1.5" tourniquet strap, providing a wider compression pattern than most standard tourniquets or tourniquets with a 1" constricting band moving through a 1.5" sleeve. The wider compression pattern results in additional arterial compression and increased patient comfort. Lastly, each tourniquet is shipped with two UV-resistant black rubber bands for mounting to your individual equipment.The SOF® Tourniquet Gen 4 is one of a few windlass tourniquets recommended for use by the Department of Defense, recommended for use by the Committee on Tactical Combat Casualty Care and Tactical Emergency Casualty Care,, and it is the tourniquet of choice for the American Red Cross. Elite military operators form around  world,use the SOF-T-W the largest police departments in the country to fire and EMS paramedics on the streets use the SOF-T-W, civilians in everyday public places just trying to be prepared also use the SOF-T-W..These customers chose the SOF® Tourniquet because it was the best option on the market. And now, the best tourniquet just got better. Made in the USA. U.S. Patent: 8,303,620 and D649,642 and 7,776,064 and patent pending. NSN #: 6515-01-587-9943 Latex-Free.  

The Tactical Mechanical Tourniquet (TMT™) is a ) is among the latest tourniquets to achieve a CoTCCC recommendation and was subsequently added to the 2019 Tactical Combat Casualty Care guidelines.  It is a device specifically designed for massive hemorrhage control of an extremity and also designed to ensure ease of application and definitively achieve occlusion. Taught as a self-aid and buddy-aid task, the Tactical Mechanical Tourniquet requires minimal training to instantly treat life-threatening hemorrhage of an extremity. The learning curve is quite easy as it requires very similar gross motor skills as other units currently in the market. Additionally, the TMT eliminates shortcomings found in other tourniquets. FAST: True One-Handed Application in 30 seconds or less DURABLE: Co-poly resin acetyl with IR/UV protective additive BETTER: eliminates the current tourniquet “percentage of failure” rate The TMT allows the user the ability to apply the tourniquet one-handed to either upper and lower extremities in 30 seconds or less.  The wider band allows occlusion to be achieved at lower pressures, which increased comfort and reduces injury.  Safety features include a dual locking mechanism to prevent slippage and loss of pressure and audible signature “click” identifies torsion bar is secure. The TMT TQ is made with advanced materials with IR and UV protection, making it less susceptible to the elements from exposure, increasing its service life, and ensuring it works when you need it. It is fully adjustable to accommodate varying limb circumferences ranging from 5-3/4” min to 38” max. SPECIFICATIONS NSN: 6515-01-656-6191 PN: 31-115 CoTCCC Recommended FDA Listed / ISO Certified / CE Marked Latex free / Single patient use Shelf life: Indefinite stored shelf life (controlled environment) Up to 10 year shelf life (operational storage) AbilityOne manufactured / contract Dimensions- Packaged: 4.5”L x 2.5”W x 1.85”D Open: 38.7”L x 2.25”W Weight: 2.9 oz. Accommodates limbs: Min: 5  3/4″ Max: 38″ Co-poly resin acetyl with IR/UV protective additive US Government owned design Berry Compliant Made in USA    

The M2 Ratcheting tourniquet is a fast and highly effective military and tactical tourniquet with a very intuitive operative mechanism making it a fast and highly effective tourniquet. The strap and mechanism are rugged and durable with a with a 0.75″ m2® ratcheting buckle and a ladder securing strap.  The tourniquet webbing is 1.5″ (38mm) wide and features printed instructions on the webbing itself. With it’s simple, intuitive ‘glove’ operation, this tourniquet has been a proven life-saving tool since 2002.  The tourniquet is self-locking and applies precise mechanical pressure easily applied with one hand that requires only ‘gross’ motor skills to operate.  The tourniquet makes a ratcheting sound when activated giving you both auditory and tactile feedback to ensure proper placement. Features: Compact, lightweight, and durable and rugged Instructions clearly printed on RMT™ 23 lb / 103 g (3.6oz)

Available in Coyote Only for the tactical market.   A separate 2" Red version is available for the civilian market. The M2 Ratcheting tourniquet is a fast and highly effective military and tactical tourniquet with a very intuitive operative mechanism making it a fast and highly effective tourniquet. The strap and mechanism are rugged and durable with a with a 1″ m2® ratcheting buckle and a ladder securing strap.  The tourniquet webbing is 2″ (50mm) wide and features printed instructions on the webbing itself. With it’s simple, intuitive ‘glove’ operation, this tourniquet has been a proven life-saving tool since 2002.  The tourniquet is self-locking and applies precise mechanical pressure easily applied with one hand that requires only ‘gross’ motor skills to operate.  The tourniquet makes a ratcheting sound when activated giving you both auditory and tactile feedback to ensure proper placement. Features: Compact, lightweight, and durable and rugged Instructions clearly printed on RMT 5 oz.

The SAM® Junctional Tourniquet for hemorrhage control is designed to control bleeding in areas where standard tourniquets would not be effective, such as with IED/Blasts or high level amputations. The Target Compression Device (TCD) is placed at or proximal to the injury site and inflated until the bleeding stops. Two TCDs can be used to occlude blood flow bi-laterally if needed.Features: Patented buckle maintains correct base force to eliminate slack "Click" provides clear feedback to confirm when to secure strap to Velcro for correct application Large, repositional and/or removable Target Compression Device (TCD) ensure easy targeting A relief valve prevents over-inflation Removable hand pump quickly inflates the TCD to achieve hemorrhage control Quick application (typically under 25 seconds with training) Clinically proven to provide the prescribed safe and effective force for pelvic stabilization. Inguinal hemorrhage Axilla hemorrhage Pelvic immobilization <25sec application time Easy to Use

The Junctional Emergency Treatment Tool™ (JETT®) includes two pressure devices in a single tool, allowing for simultaneous occlusion of blood flow to both lower limbs (bilateral) with an easy to apply, pre-assembled, ready-to-use belt solution. The unique design of the JETT® allows for patient transport while the device is in place and includes a lanyard and toggle solution to ensure that the Windlass Axle does not loosen due to vibration or bumps during transport.  In cases where there are bilateral injuries, the JETT® offers a simple, safe solution for occluding blood flow to both lower extremities. This expanded capability is built into every JETT®, meaning that with standardized application training the device will be pre-positioned for rapid bilateral deployment whether applying for a unilateral or bilateral injury. High extremity wounds in the thigh/groin region where tourniquets cannot be placed or are less effective require equipment such as the JETT® to stop the bleeding and potentially save the life of a casualty that would otherwise bleed out in minutes. Penetrating trauma, blast injuries and amputation are examples of injuries that may require treatment with this device.

The Abdominal Aortic and Junctional Tourniquet – Stabilized (AAJT-S) is the latest life-saving innovation for bleeding not amenable to standard tourniquet application. Building on the success of the AAJT, the AAJT-S features an easy-to-use tightening system and advanced materials with the goal of consistent, stable occlusion. The AAJT-S is indicated to control difficult bleeding in the primary junctional areas (inguinal and axillary) as well as the pelvis- the only product on the market to be approved for all three. In addition, it’s the only device to have documented lives saved from both upper and lower junctional hemorrhage. The AAJT-S device design and function facilitates a large area of effective occlusion pressure, which provides the medic with a high degree of accuracy and reliability for the positioning of the device in the proper anatomical locations to stop the bleeding. In addition, the AAJT-S has demonstrated the ability to maintain efficacy during patient movement in confined space rescue, drags, and hasty extraction.  FEATURES: Lightest, most compact junctional tourniquet on the market Easy to use and quick to apply. Large area of effective pressure for greater reliability Provides stable and complete occlusion of blood flow to the lower extremities, upper extremities, or pelvis. Can be applied at junctional sites (inguinal, axillary) or mid-abdomen. Demonstrated ability to remain in place and effective during patient movement. Similar hemostatic efficacy to Zone 3 REBOA1 Lower training burden compared to REBOA procedure. 1. Rall, Jason M., et al. “Comparison of Zone 3 Resuscitative Endovascular Balloon Occlusion of the Aorta and the Abdominal Aortic and Junctional Tourniquet in a Model of Junctional Hemorrhage in Swine.” Journal of Surgical Research, vol. 226, 2018, pp. 31–39. Dimensions: Packaged: L 9 in. x W 8 in. x D 2 in. Stored: L 7.5 in. x W 6.5 in. x D 2 in. Weight: 17 oz

The K9 Tourniquet has been engineered to work effectively on tapered anatomies, such as the leg of a K9, and is designed to be placed high on the limb. It has integrated traction technology that prevents the tourniquet from slipping down the animal’s leg, which would result in a loss of compression. The slippage is amplified when the animal is started to be moved and extricated. Slippage is a common occurrence when tourniquets or pressure dressings designed for humans are used on such tapered anatomy. The K9 Tourniquet addresses these issues and does so with quick application time.

The JETT® Pack is a nylon pouch designed for carrying the JETT® on the outside of an aid bag. Features 2 internal mesh pouches. PALS/MOLLE-style connectors provide versatile attachment options.  POUCH ONLY, J.E.T.T. sold separately.

The C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of 1000D IR Signature Reduced Nylon with MOLLE/PALS-style connectors. The C-A-T® Holder protects your tourniquet from the elements and has an easy-open elastic pull tab. The C-A-T® Holder is available in Black, Coyote, and Multicam, Red and OD Green colors. Made in the USA Berry Compliant NTOA Member Approved NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

C3 (Concealed C-A-T® Carrier) Designed as a soft armor, under-the clothing concealed carrying option for your C-A-T® tourniquet – a versatile option for patrol officers that have no room on their duty belt. Multiple attachment point options include direct Hook & Loop attachment or looped configuration for threading over body armor. Easily mounts to body armor in any number of locations. Adjustable elastic strap.  NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The C-A-T Elastic TQ Holder from North American Rescue was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest, gear or belt for rapid and easy access. It is made of 500D IR Signature Reduced Nylon with MOLLE/PALS-style connectors with end tuck instead of button snap. The Elastic Holder protects your tourniquet from the elements and has an easy-open hood design to completely clear the TQ for removal up down or outward. NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The Gen 7 C-A-T® RIGID TQ Case with Cover was designed to provide personnel with the capability to carry and protect their life-saving Gen 7 C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The Case Cover completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Injection Molded Nylon Case provides strength and durability as it holds the C-A-T® Tourniquet tightly in place. When deployed, the cover "breaks apart" so there is no snagging on your tourniquet and allows for easy and quick deployment of the C-A-T®. Includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The Gen 7 C-A-T® RIGID TQ Case with Cover was designed to provide personnel with the capability to carry and protect their life-saving Gen 7 C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The Case Cover completely covers your tourniquet to protect it from the elements and provides a clean, uniform look. The Injection Molded Nylon Case provides strength and durability as it holds the C-A-T® Tourniquet tightly in place. When deployed, the cover "breaks apart" so there is no snagging on your tourniquet and allows for easy and quick deployment of the C-A-T®. Includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The Kydex Tourniquet TACO by High Speed Gear is designed to retain windlass tourniquets on a belt, rig, or bag using the unique properties of Kydex. Comp-Tac uses airline-grade Kydex, which has a smooth inside finish, is resistant to sweat and solvents, and provides a material that won't damage the tourniquet, or the platform it's attached to. Combining Comp-Tac's Kydex manufacturing capabilities with High Speed Gear's versatile TACO design provides user the best of both worlds in manufacturing and use.Features: 100% aircraft-grade Kydex body gives a smooth finish for easy insertion and draw (0.080 thickness) Unique shock cord design allows for the use of most windlass-style tourniquets Kydex does not hold water and won't add weight from rain, humidity, or sweat TACO hole pattern allows for stacking two pouches in the space of one Can be mounted to belts up to 2"

This Combat Tourniquet Holster is specifically designed to fit the Gen 7 CAT tourniquet and other combat TQs. The rear straps allow for an easy and reliable attachment to any MOLLE platform. The holder's adjustable height and customizable mounting positions enable it to be mounted both horizontally and vertically. Its longer rear straps even accommodate duty belts up to 3" wide.  The Rigid Tourniquet Holder offers essential protection for first responders and public safety personnel. Its secure and adjustable design accommodates the Gen 7 C-A-T combat tourniquet for fast deployment in an emergency. Mount it vertically, horizontally, or at a right or left angle, and adjust its height to suit your unique needs. Injection molded to fit the tourniquet perfectly, no straps, flaps, or buckles are needed. Keep your tourniquet near in an emergency with this reliable holder.

Always have the Gen 7 C-A-T® within easy reach, yet keep it protected in a rigid holder capable of withstanding foot pursuits, combative subjects and daily patrol functions without allowing it to fall out of the carrier The Gen 7 C-A-T® RIGID TQ Case® was designed to provide personnel with the capability to carry the life-saving C-A-T® Tourniquet on their person by easily mounting it to their duty/patrol/pistol belt, where it is needed most. It can be mounted either vertically or horizontally and can also be attached to a Safariland Drop Leg Shroud using the existing holes (the case mounts with 2 screws in the middle of the case). The case is made from Injection Molded Nylon whic provides strength and durability as it holds the Gen 7 C-A-T® Tourniquet tightly in place.  The case design allows it to be used with no straps or covers so that the tourniquet can be quickly and easily removed by grabbing and pulling the top part of the C-A-T® Tourniquet. The case also includes a hook and loop cross to identify it as medical equipment. NOTE: Accommodates Gen 7 C-A-T® Tourniquet (not included)

The Laser Cut C-A-T® Holder was specifically designed to allow personnel to place their C-A-T® Tourniquet on their vest or gear for rapid and easy access. It is made of laser cut laminated Cordura nylon. With an innovative construction process this tourniquet holder weighs 50% lighter than traditional nylon TQ holders. The included snap-free PALS/MOLLE-style connectors ensure secure attachment to a duty vest, gear or belt (mounted vertically). To keep your C-A-T® TQ protected from the elements the Laser Cut C-A-T® Holder has an integrated cover with easy-open elastic pull tab. Features: Constructed with laser cut laminated Cordura®nylon Easy Pull Elastic Cover PALS/MOLLE-style connections Accommodates GEN 6 and GEN 7 C-A-T® tourniquets Weighs less than traditional TQ holders No brass snaps or grommets to wear-out Super durable, yet 50% lighter than traditional nylon TQ holders Designed & built to easily integrate with new, US DoD laser-cut body armor (PCG3 and MSV) yet “backwards compatible” will easily mount to legacy-type MOLLE vests Laser-Cut “TQ” with contrasting background color 4 ea. front-mounted, laser cut MAPs (MOLLE Attachment Points) for “stacking”. Can easily stack or mount 2 pouches together saving precious plate carrier real-estate Deploys easily with one hand, integrated cover with snug, elastic pull-tab C-A-T® TQ sold separately NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

5.11 FLEX Tourniquet Pouch Being a first responder is a passion, not just a job description. Our Flex Tourniquet Pouch provides ready and unfailing access should the unthinkable happen. This pouch can be mounted vertically utilizing the 5.11® FLEX-HT™️ Mounting System or horizontally using integrated hook/loop straps on MOLLE platforms as well as multiple angles on HEXGRID®. The Flex Tourniquet Pouch also features a tuckable hook/loop flap for a drop-down plate carrier attachment. Elastic compression webbing keeps everything secure during high-speed movement and the Hypalon® pull tab ensures quick opening when seconds count. Imported.  DIMENSIONS 6.0”H x 2.0”L x 1.5”DWeight 0.08kg NOTE: Accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (not included)

The The Inside-the-Waistband (IWB) RIGID TQ Case® for the C-A-T® Gen 7 is a hard-sided tourniquet case designed to give you the ability to carry a tourniquet. It can be worn on your everyday rigger style or dress belt. The IWB RIGID TQ Case® holds your tourniquet securely in place utilizing friction, so there’s no straps, buckles or flaps to undo to deploy the tourniquet. It offers true one-handed deployment of the tourniquet. Just grab the exposed portion of the tourniquet and with a swift pull, it releases. Utilizing the Raven Concealment Systems Overhook, you can comfortably conceal your tourniquet “clocked” in any position that suits you.The injection molded IWB RIGID TQ Case® offers both 1.5” and 1.75” belt options and ride adjustment. Specs: Keeps your C-A-T® Tourniquet close at hand for rapid deployment Holds the C-A-T® Tourniquet (Gen 7) utilizing friction Designed with built-in Shirt Shield that creates a barrier between your body, shirt, and the exposed portion of your tourniquet Injection Molded Case to stand up to rugged LE/MIL usage Drainage hole at bottom of case Offers a range of adjustment Available Mounting Options – 1.5” and 1.75” IWB Overhook (included) designed, manufactured, and assembled in the USA. Dimensions: Packaged - L 5 in. x W 3.25 in. x D 1.625 in. Weight: 3 oz.

A tourniquet needs to be accessible and readily available for one-handed deployment in under a minute, 30 seconds if possible. To meet the specific duty gear needs of law enforcement officers, we now offer leather C-A-T Holders for use on a daily duty belt and designed to fit within organizational uniform standards. Constructed of full grain leather and high-quality silver snaps, this premium tourniquet holder securely fastens to your duty belt for easy one-handed access to your tourniquet while empowering you to take control of extreme medical situations in just a matter of seconds. The convenient loop allows the holder to be added to your belt without and is ideal for carrying your C-A-T® Gen 7 but can also accommodate other popular windlass tourniquets as well.  A clip version is available as well! Dimensions: L 5.75 in. x W 2 in. x D 2 in. Weight: 3.2 oz