Tasmanian Tiger · Made in Germany · Low-Profile Ballistic Platform
TT Plate Carrier LP MK II
Ultra-flat, lightweight plate carrier built for undercover and semi-concealed ballistic carry. T-Square Rip FD polyamide shell, elastic cummerbund with side accessory pockets — full SAPI compatibility at only 410 g.
Key Specifications
| Material | T-Square Rip FD 100% Polyamide, 210 den full-dull weave |
| Plate Size | S/M: SAPI plates up to 30 × 25 cm · L: up to 33 × 26 cm |
| Weight | 410 g (S/M) |
| Shoulder Straps | Adjustable 26–36 cm |
| Side Closure | Length-adjustable elastic side attachment |
| Side Pockets | 2 fixed + 2 removable elastic side pockets (mag / radio / accessories) |
| Front Profile | Neutral — no external MOLLE webbing on front face |
| Colors Available | Black, Olive Drab, Coyote, Titan Grey |
| Origin | Germany |
Key Features
Ultra-Flat Concealment Profile
T-Square Rip FD fabric uses a tight 210-denier full-dull weave that is both extremely strong and exceptionally flat. The neutral front eliminates the telltale webbing bulge of tactical carriers under a jacket or outer layer — purpose-built for plainclothes and undercover protective roles.
Elastic Side Accessory System
Two fixed and two removable elastic side pockets accommodate a single magazine, radio, or small accessory on each side. The elastic side attachment is length-adjustable, providing a secure fit across a wide range of body types without rigid cummerbund bulk.
Minimal-Footprint Medical Staging
The side elastic pockets provide space to stage a folded CAT tourniquet, single SOFTT-W, or basic blowout kit in a discreet carry format. No MOLLE surface is required for quick-access medical — a deliberate design choice for roles that demand minimal visual signature.
Rapid Donning for Emergency Use
The simple elastic side closure and adjustable shoulder straps allow fast donning in emergency protective scenarios — designed for security personnel who may need to deploy protection rapidly without the setup time of a fully-configured tactical carrier.
Who Carries It
Related Products & Collections
The TT Plate Carrier LP MK II is a ballistic plate-carrying platform — plates are sold separately. No NIJ protection level is claimed by MED-TAC for the carrier itself. Tasmanian Tiger® is a registered trademark of TATONKA GmbH, Dasing, Germany.
When to Choose the TT Plate Carrier LP MK II
- Plainclothes Law Enforcement — Requires ballistic protection without tactical appearance. The neutral front and flat T-Square Rip FD profile stays concealed under a jacket or outer garment that would bulge over a standard MOLLE-heavy carrier.
- Executive Protection Detail — Operators working in civilian environments where visible tactical gear is inappropriate. The LP MKII provides rifle-rated plate capability in the thinnest viable platform.
- Quick-Deploy Protective Roles — Security personnel who store a carrier in a vehicle and need to don protection in under 30 seconds. The elastic side closure and simple shoulder adjustment make this the fastest full-plate carrier in the TT lineup to put on.
- Secondary Carrier for Tactical Teams — Operators who carry a full-featured tactical carrier for primary missions but need an LP option for surveillance, transport, or secondary roles within the same operation.
TT Plate Carrier LP MK II vs. The Alternatives
- vs. TT Plate Carrier LC — The LC has full external MOLLE for heavy gear staging; the LP MKII is intentionally minimal for concealment. Use the LC for fully configured tactical loadouts, the LP MKII when profile matters more than external gear capacity.
- vs. TT Plate Carrier QR LC — QR LC adds an emergency quick-release system and full laser-cut MOLLE — ideal for rescue and medical emergency doffing. LP MKII omits QR for a lighter, flatter, more concealable carrier.
- vs. Soft Armor Concealable Vests — Soft armor vests (Level IIIA) are lighter and more concealable for handgun threats. The LP MKII accepts hard rifle-rated plates for Level III/IV protection at the tradeoff of slightly more bulk. Use LP MKII when rifle threats are plausible.
- vs. Generic Low-Cost LP Carriers — T-Square Rip FD is a precision German performance fabric vs. budget ripstop nylon. The LP MKII is manufactured to Bundeswehr-aligned quality standards with tested hardware — not a price-point carrier.
Frequently Asked Questions — TT Plate Carrier LP MK II
Q: What does LP stand for?
A: LP stands for Low Profile — the design philosophy prioritizing minimal thickness, neutral front face, and concealable carry over maximum external gear-mounting capability.
Q: Can I attach MOLLE pouches to the LP MKII?
A: The LP MKII does not have a MOLLE front face by design. The side elastic pockets accommodate magazines, a radio, or small accessories. For full MOLLE front access, the TT Plate Carrier LC or QR LC is the correct choice.
Q: What plate sizes fit?
A: Size S/M accepts SAPI plates up to 30 × 25 cm. Size L accepts plates up to 33 × 26 cm. Plates are not included.
Q: Is T-Square Rip FD the same as CORDURA?
A: T-Square Rip FD is a different fabric — a tight 210-denier full-dull nylon weave optimized for low visual signature and lightweight carry. CORDURA 700 den is Tasmanian Tiger's primary fabric for full-featured tactical products; T-Square Rip FD is reserved for low-profile applications like the LP MKII.
Q: Does this carrier have a quick-release system?
A: No. For quick-release doffing capability, see the TT Plate Carrier QR LC which features an ROC buckle emergency release system.
Available Options:
- Black
- Olive Drab
- Coyote Tan
- Titan Gray
Specifications coming soon. Contact us for detailed product information.
FREQUENTLY ASKED QUESTIONS
