The ultimate protection, breathability, and comfort with the Lightweight Operational Plate Carrier (LOPC)  Designed by U.S. Veterans. The Chase Tactical Lightweight Operational Plate Carrier (LOPC) is a lightweight plate carrier that works with any set of hard armor plates and soft armor backers. The LOPC has built-in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights.  The front of the Chase Tactical Lightweight Operational Plate Carrier incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of preconfigured weapon-specific pouch panels.  The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips. Spacer mesh is used on the inside of the LOPC for increased breathability and comfort. The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior. Strong drag handle that Velcro’s down and out of the way when not in use. Key Features: Removable cummerbund with Mil-Spec Velcro Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior. Vertical Clips for rapid add/removal of auxiliary chest worn equipment Comes standard with a removable MOLLE clip placard Interchangeable cummerbund system Fully adjustable & padded shoulder straps Spacer mesh for comfort & breathability Strong drag handle that Velcro’s down Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The LVPC is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporates 2 internal pouches on each side which can hold mag pouches and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical Low-Vis Plate Carrier M1 (LVPC-M1) The LVPC-M1 is a combination of our Low-Vis Plate Carrier and our Triple 5.56 Velcro Mag Pouch.  The LVPC-M1 is a low profile slick plate carrier and fully adjustable on the shoulders for size. The sides are made from double layer Mil-Spec elastic and incorporates 2 internal pouches on each side which can hold mag pouches, tourniquets and/or radio. The sides are fully adjustable for girth by way of Velcro closure. Key Features: Removable cummerbund with Double Layer Mil-Spec Velcro Removable Triple Velcro 5.56 Mag Pouch 2 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

Low Profile & High Protection with the Low-Vis Plate Carrier Elite (LVPC-E) by Chase Tactical The Low-Vis Plate Carrier Elite (LVPC-E) was designed with direct feedback from our customers asking for features of our original LVPC with features from our very popular SOCC plate carrier.  The LVPC-E is a low-profile, slick plate carrier built for Low Visibility and concealment. It is fully adjustable on the shoulders for size, and the sides are made from double layer Mil-Spec elastic. The Low-Vis Plate Carrier Elite (LVPC-E) also incorporates 3 internal pouches on each side which can hold rifle magazines, tourniquets, and/or radios. The sides of our Low-Visibility Plate Carrier are fully adjustable for girth by way of Velcro closure.  The interior of the LVPC-E has moisture wicking spacer mesh adding additional comfort to the body when worn.  The front of the LVPC-E incorporates a large Velcro area for placards and 2 vertical clips which will accept a variety of pre-configured weapon-specific pouch panels. Chase Tactical Low-Visibility Plate Carrier Elite (LVPC-E) Key Features: Removable cummerbund with Double Layer Mil-Spec Elastic 3 Internal Pouches on each side of Cummerbund Fully adjustable shoulder straps Large Velcro area for placards Vertical Clips for rapid add/removal of auxiliary chest worn equipment Front/Rear interior moisture wicking spacer mesh Made with Mil-Spec IR Treated 500D Cordura All our Fabrics are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical 3A300 Level IIIA LVPC Soft Armor is specifically designed for the Chase Tactical Low Vis Plate Carrier (LVPC) Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.75″ x 12.50″ Shooters Cut. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 2-3 Weeks for shipment.

The Chase Tactical 3A300 Level IIIA MEAC Soft Armor is specifically designed for the Chase Tactical MEAC Plate Carrier.  The Level IIIA soft armor is certified under NIJ 0101.06 Level IIIA Standards. Plate Backer comes in a set of (2) 10.50″ x 11.50″ SAPI style and Cummerbund Armor comes in a set of  or Large 5.50″ x 13.50″. Features: Protection: Level IIIA Stand Alone against handgun rounds NIJ Standard 0101.06 Certified: Tested and verified to meet or exceed ballistic resistance as specified under NIJ Standard 0101.06 Aerial Density: 1.19 psf (5.6kg/sqm) Thinness: 0.26” Material: Kevlar Soft Armor Panel ABMM: Advanced Ballistic Matrix Materials Multi-hit capabilities Sonobond Sealed rip stop water resistant cover Custom Sizing: Available for min quantity +20% surcharge per size Warranty: 5 years on all ballistic material and 1 year on exterior cover material and workmanship MADE IN THE USA Due to the nature of this product, All Sales are Final. Warranty/MFG Defects excluded. LE/MIL only shipments to CT. Please allow approx. 4-5 Weeks for shipment.

The ultimate protection, breathability, and comfort with the Lightweight Operational Plate Carrier (LOPC)  Designed by U.S. Veterans. The Chase Tactical Lightweight Operational Plate Carrier (LOPC) is a lightweight plate carrier that works with any set of hard armor plates and soft armor backers. The LOPC has built-in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights.  The front of the Chase Tactical Lightweight Operational Plate Carrier incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of preconfigured weapon-specific pouch panels.  The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips. Spacer mesh is used on the inside of the LOPC for increased breathability and comfort. The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior. Strong drag handle that Velcro’s down and out of the way when not in use. Key Features: Removable cummerbund with Mil-Spec Velcro Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior. Vertical Clips for rapid add/removal of auxiliary chest worn equipment Comes standard with a removable MOLLE clip placard Interchangeable cummerbund system Fully adjustable & padded shoulder straps Spacer mesh for comfort & breathability Strong drag handle that Velcro’s down Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical Quick Response Carrier (QRC) was developed as a minimalistic no thrills, no frills plate carrier that is lightweight, functional and robust. When worn with ballistic inserts, the QRC can be quickly donned for rapid action response to high threat scenarios such as Active Shooter, Entries, Home Defense, or other critical incidents. Key Features: Adjustable 2″ Wide Shoulder Straps Adjustable 2″ Waist Strap with Quick Release Buckles Front & Back 4″x8″ Color Matched Velcro Area for ID Placards Strong drag handle that Velcro’s down Bottom Load Armor with an Internal Stirrup to Adjust Height Front & Rear MOLLE Webbing Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The Chase Tactical Quick Response Carrier (QRC) was developed as a minimalistic no thrills, no frills plate carrier that is lightweight, functional and robust. When worn with ballistic inserts, the QRC can be quickly donned for rapid action response to high threat scenarios such as Active Shooter, Entries, Home Defense, or other critical incidents. Key Features: Adjustable 2″ Wide Shoulder Straps Adjustable 2″ Waist Strap with Quick Release Buckles Front & Back 4″x8″ Color Matched Velcro Area for ID Placards Strong drag handle that Velcro’s down Bottom Load Armor with an Internal Stirrup to Adjust Height Front & Rear MOLLE Webbing Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The AID Responder is an intuitive-to-use, streamlined carrier designed for core body protection. Operators can easily adjust the carrier’s one-size-fits-most design in seconds through the padded shoulder straps and side waist band with quick-release buckles. The maximum waist circumference is 61”.The carrier’s low-profile design allows for easy storage and expedient deployment. It can accommodate 10”x12” shooters cut hard armor plates or soft panels in the front and back. The durable design is constructed from 1,000-denier Cordura® nylon and comes with an industry-leading 5-year warranty.Features: Adjustable hook-and-loop shoulder straps for optimal fitment Adjustable side waist band with quick-release buckles (up to 61” waist circumference) Plate pockets to accommodate 10”x12” shooters cut hard armor plates or soft panels for both front and back Cooling spacer mesh to provide stand-off and heat dissipation when worn Reinforced Drag Handle Front and back 8”W x 3”H hook-and-loop ID panel for attaching patches MOLLE modular attachment system on front and back Durable 1,000-denier Cordura® nylon construction 5-year warranty Dimensions: 15"H x 12"W x 1"DWeight: 1lb 6oz <img height="1" width="1" style="display:none" src="https://www.facebook.com/tr?id=233288470892020&ev=PageView&noscript=1"> <img src="//bat.bing.com/action/0?ti=25078642&Ver=2" height="0" width="0" style="display:none; visibility: hidden;">

The Tasmanian Tiger Lightweight Laser Cut Plate Carrier is an extremely high quality, comfortably system for everyday patrol or special operations use.  It is designed to integrate with a variety of backpacks, specially the Tasmanian Tiger Medic Packs.  The inside walls are lined with cool fabric with a channel along the middle for cooling and comfort. The plate pockets are designed for medium sized SAPI plates, approximately 10" x 12". Features: Shoulder straps can be adjusted in length Length-adjustable elastic side attachment Front panel detaches for loading Front and side areas with MOLLE system for individual extension Laser cut MOLLE system Integrated radio equipment pocket

Designed for use by instructors, the Instructor Armor Carrier Vest from Voodoo Tactical is bright red for maximum visibility and features removable front and rear Instructor ID patches. The vest is designed to offer for a high level of protection, padded front and rear pockets accommodate ballistic plates or panels.  Additionally, the side 5"x8" pouches are designed for soft ballistic panels. The adjustable, padded side sections accept smaller, soft plates providing protection from all angles. As an additional safety feature, the vest incorporates a sturdy drag handle, allowing teammates to easily pull wearers out of danger. An adjustable hook-and-loop elastic waistband (up to 2XL) and padded shoulder supports allow the vest to fit securely and comfortably for extended wear. Voodoo's signature cooling-mesh interior prevents sweat buildup, guaranteeing lasting comfort and dryness. An internal pocket holds a hydration bladder, or can serve as a convenient place to store documents. For additional storage, the vest's exterior is covered in universal straps, for modular pouch and accessory attachment, as well as D-rings on the shoulders for hands-free flashlight use. Swap out the INSTRUCTOR patch for your department issue placard for a low-cost, high-performance Rescue Task Force vest!