Sutures sold separately The Sterile Laceration Tray (Facial) is a conveniently packaged tool kit that comes in a peel-to-open pouch for ease of access to the kit components. The Laceration Tray (Facial) is cost effective and is a single use kit with a 3 year shelf life. SPECS Sterile Easy to open Pouch Cost Effective Kit Contents: 1 x Kimguard One Step (30 in. x 30 in.) 1 x Medicine Cup (60cc) 1 x Scalpel, Safety #15 1 x Halstead Mosquito Forceps, ST Satin 1 x Halstead Mosquito Forceps, CRV Satin 1 x Webster Needle Holder, Satin (5in.) 1 x Adson Forceps, FP, Satin 1 x Iris Scissors, ST, Satin 1 x Iris Scissors, CRV, Satin (4.5 in.) 1 x Frazier Skin Hook, Sharp (5 in.) 10 x Gauze Pads 4 x 4 in. 12 ply 2 x Gauze Pads 2 x 2 in. 12 ply 1 x Fenestrated Drape with tape (18 in. x 26 in.) 2 x Towel, OR Blue (17 in.x 25 in.) Dimensions: Packaged: L 9 in. x W 5 in. x D 2.75 in. Weight: 12 oz

A lightweight, strong, comfortable splint that can be easily molded to fit almost any fracture. Waterproof, reusable, radiolucent and compact, the SAM Splint II is not affected by environmental extremes. Specifically designed to meet military needs and standards. NSN: 6515-01-494-1951 Special Features: Specifically designed to meet military requirements Easily molded to fit most fractures Both lightweight and strong Comfortable Waterproof Reusable Easy to clean Radiolucent Compact Impervious to environmental extremes Includes illustrated step-by-step instructions Dimensions: Packaged: H 9.25 in. x W 4.25 in. x D 1 in. Splint Unfolded: L 36 in. x W 4.25 in. Weight: 4.5 oz

The ultimate protection, breathability, and comfort with the Lightweight Operational Plate Carrier (LOPC)  Designed by U.S. Veterans. The Chase Tactical Lightweight Operational Plate Carrier (LOPC) is a lightweight plate carrier that works with any set of hard armor plates and soft armor backers. The LOPC has built-in padded and fully adjustable shoulder straps. The tops of the shoulder straps have both nylon webbing and elastic webbing for mounting and routing tourniquets, hydration tubes, radio antennas, handsets, comm wires, V Lites, and strobe lights.  The front of the Chase Tactical Lightweight Operational Plate Carrier incorporates a large matching Velcro loop area for placards and 2 vertical clips which will accept a variety of preconfigured weapon-specific pouch panels.  The LOPC comes standard with a removable MOLLE clip placard held in place by 2 vertical clips. Spacer mesh is used on the inside of the LOPC for increased breathability and comfort. The cummerbund is made of lightweight breathable mesh with MOLLE webbing on the exterior and interior. Strong drag handle that Velcro’s down and out of the way when not in use. Key Features: Removable cummerbund with Mil-Spec Velcro Lightweight breathable cummerbund with MOLLE webbing on the exterior and interior. Vertical Clips for rapid add/removal of auxiliary chest worn equipment Comes standard with a removable MOLLE clip placard Interchangeable cummerbund system Fully adjustable & padded shoulder straps Spacer mesh for comfort & breathability Strong drag handle that Velcro’s down Large Velcro area for placards Made with Mil-Spec IR Treated 500D Cordura Mil-Spec IR Treated Murdock Webbing All our Fabrics, Webbing, and Plastic Hardware are treated at source to deliver the lowest I.R. Signature possible. Sizing: REGULAR: Fits 10″ x 12″ Plate (Standard Size) X-LARGE: Fits 11″ x 14″ Plate (Most Uncommon Size)

The SK7 Kourass plate carrier is a next generation light weight and low profile carrier. Not only it offers unsurpassed load support and comfort it is also designed to be virtually unbreakable. SK7’s Kourass is the only vest carrier available with our SAFEgo quick release system. Based on magnetic light weight buckles SAFEgo let the operator to release the carrier with a simple finger movement at the same time that it guarantee a proper fit and operational safety. Using laser cut MOLLE systems offers a light weight alternative to traditional webbing with the same load capacity. All the materials integrated in SK7’s Kourass are proudly made in the United States. Features: Constructed with U.S. made original Cordura®. 500 Denier and 1,000 Denier available. Minimum 10 rows of laser cut MOLLE to attach any available pouches, accessories and holsters. laser cut MOLLE rows on the back 5 laser cut MOLLE rows on each side plate pouches.  Detachable front MOLLIE with SAFEgo buckle and Velcro® hook and loop.  Heavy duty drag handle.  Can handle 10 1/4" x 13 1/4" front and back plates and 6x6” and 6x8” side plates.  Fully adjustable in girth and height for customizing your fit. Original Velcro® panel on the front and back allows you to attach patches for customized ID.

Laser Cut CAT Tourniquet Pouch The Laser Cut CAT Tourniquet Pouch is a revolutionary accessory designed for quick and easy access to your C-A-T® Tourniquet. Crafted from laser cut laminated Cordura nylon, this pouch is not only durable but also 50% lighter than traditional nylon holders, making it a versatile and practical choice. Key Features: Lightweight Design: Weighing less than traditional holders, this pouch is perfect for minimizing load while ensuring essential gear is readily available. Secure Attachment: Equipped with snap-free PALS/MOLLE-style connectors, the pouch can be easily and securely attached to vests, gear, or belts, offering convenience and peace of mind. Weather Protection: The integrated cover with an easy-open elastic pull tab keeps your C-A-T® Tourniquet shielded from the elements, maintaining its integrity in various conditions. Compatibility: Designed to accommodate both Gen 6 and Gen 7 C-A-T® Tourniquets, this pouch is versatile and adaptable to different tourniquet models, ensuring broad usability. Enhanced Functionality: Featuring front-mounted MAPs for stacking pouches, this pouch allows for efficient use of space while ensuring quick and easy deployment with just one hand. Upgrade your gear with the Laser Cut CAT Tourniquet Pouch, a cutting-edge accessory that combines innovation, durability, and functionality to enhance your tactical setup. (C-A-T® Tourniquet sold separately)

Expanding on the success and feedback from the QuikLitter™ and QuikLitter™ XL, North American Rescue's QuikLitter™ Lite has added capability and reduced weight and size to be able to fit into a cargo pocket. The QuikLitter™ Lite is an emergency carry litter that is designed for rapid deployment for the movement of casualties for mass casualty incidents, disasters, active shooter events, as well as for everyday patient movements. Constructed of a lightweight nylon material with heavy-duty nylon webbing, the NAR QuikLitter™ Lite is rated to 750 lb and is latex free. It features ten (10) carry handles with four (4) on each side and one (1) larger handle at either end of the litter to provide multiple carry points. SPECS: Perfect balance of size, weight, cost, and capability Features ten large carry handles with a load capacity tested to 750 lb Made of lightweight, heavy-duty nylon Vacuum-packed to conserve space and fit in a cargo pocket Latex-free Water-resistant Dimensions: Litter Bed: L 74 in. x W 27 in. Packaged: L 7 in. x W 6 in. x D 1.75 in. Weight: 12 oz Load rating: 750 lb

5.11 FLEX TacMed Pouch Medical supplies are shown for display purposes only and not included. The 5.11 FLEX TacMed Pouch is a high-speed, lifesaving pack that allows for a quick tactical and medical response when a team member goes down. Our FLEX TacMed Pouch puts low drag back in your first-aid response with a quick-pull, drop-down front opening where bungee cords, pockets, and elastic bands retain lifesaving supplies upfront and ready to go. Rapid deployment is just the beginning, though. An additional compartment in the back, with a bungee retention strap, can store a pair of AR magazines or other equipment. FEATURES: Allows for the carry of TacMed supplies and dual AR mag (NOT INCLUDED) FLEX-HT™️ Mounting System Front laser-cut platform for accessories or patches Quick pull drop-front opening for access Bungee compression lashing system. Elastic bands and org slip pockets Magazine compartment with compression strap Elastic band and drain holes on the bottom panel. 500D Nylon DIMENSIONS: 8”H x 7.0”L x 2.0”DWeight 0.27kgs

I’m Our Rescue Task Force Chest Pouch is designed to add medical equipment to the MKIII RTF Tactical Responder Ballistic Vest. Made of 500D CORDURA® Solution-Dyed Nylon, this rugged chest pouch allows quick and easy access to the contents (non-tactical) from any ballistic vest with a MOLLE-style attachment system. The large, ambidextrous, premium-grade trauma shears are quickly accessible from the outside of the pouch and tethered to a retractable leash. It can be secured to the front of the body armor using a MOLLE style attachment system SPECS Designed to add medical equipment to the MKIII RTF Tactical Responder Ballistic Vest Also compatible with other ballistic vests with MOLLE-style attachment system Configurable based on individual skill set and mission requirements Rapid access and organization is enhanced by elastic storage loops that keep items in place until needed 500D CORDURA® Solution-Dyed Nylon with built in Near Infrared Signature Reduction Sand and water resistant zippers with silent pulls PALS/MOLLE-style attachment system Large, ambidextrous, premium grade Trauma Shears Kit Contents: 2 x C-A-T® (Combat Application Tourniquet®) 2 x NAR Wound Packing Gauze (3 in. x 5 yd) 2 x Responder Emergency Trauma Dressing (ETD™) - 6 in. 2 x Nasopharyngeal Airway 28F with Lubricant 2 x HyFin® Vent Chest Seal Twin Pack 3 x pair Blue Responder Gloves, Lg. 4 x Combat Casualty Card 1 x Scissor Leash™ 1 x Trauma Shears (7.25 in.) 2 x Permanent Marker 1 x Luminous MED ID Patch 1 x Bag (NAR-4™ Chest Pouch) Dimensions: Dimensions: L 7 in. x W 9 in. x D 3.5 in. Weight: 3.35 lb (3 lb 5.6 oz)

The NAR Armor Abdomen Extender provides increased ballistic coverage and protection for providers. This extender attaches to the ballistic vest via hook and loop and provides full range movement. Constructed from the same superior ballistic package as our NIJ level IIIA soft armor. Provides an additional platform to mount tourniquets or frequently used equipment. NIJ 0101.06 IIIA soft armor that has been special threat tested for advanced ballistic threats including fragmentation. NIJ 0101.06 Certified V50 – 357sig 125gr TMJ (new) | 1867 ft/s P-BFS Avg. – 357sig 125gr TMJ | 27.3 mm V50 – 44mag 240gr JHP (new) | 1661 ft/s P-BFS Avg. – 44mag 240gr JHP | 36 mm Special Threat tested for fragmentation: V50 - 2gr RCC | 3060 ft/s V50 - 4gr RCC | 2642 ft/s V50 - 16gr RCC | 2244 ft/s V50 - 17gr FSP (.22cal) | 2017 ft/s V50 - 64gr RCC | 1866 ft/s V50 – 9mm 127gr SXT (new) | 1754 ft/s P-BFS Avg. – 9mm 127gr SXT | 24.6 mm P-BFS Avg. – 40cal 165gr S+W Sp GDHP | 27.2 mm P-BFS Avg. – 5.7x28 27gr SS195 | 17 mm P-BFS Avg. – 5.7x28 27gr SS197 | 19.3 mm Dimensions: L 4.5 in. x W 10 in. x D 0.5 in. Weight: 0.38 lbs

First responders are increasingly become the target of violence in recent times... PROTECT YOURSELF AND SAVE LIVES... The practical Fire/EMS solution for personnel in active shooter and mass casualty incidents with an emphasis on integrating Tactical Emergency Casualty Care. This lightweight and comfortable cummerbund was developed for Fire/EMS for daily wear as well as RTF. The smaller cummerbund is designed to decrease bulk and unnecessary ballistic overlap for smaller providers while still providing maximum coverage/protection, this increases comfort to the provider for extended wear, same advanced ballistic protection as the NIJ level IIIA armor package utilized in the vest, allows custom fit for smaller to medium sized providers, and provides multiple MOLLE attachment points NIJ 0101.06 IIIA soft armor that has been special threat tested for advanced ballistic threats including fragmentation. Now more than ever, your personal safety is paramount in the performance of your duties. Wearing ballistic protective equipment (BPE) is one of the best ways to help protect yourself in a violent environment. SPECS Developed for Fire/EMS for daily wear as well as RTF Lightweight advanced ballistic protection Rapidly adjustable to all sizes Allows full range of motion while also providing increased ballistic coverage Fitted external plate pockets – more comfortable than internal ones NIJ 0101.06 Level IIIA protection with additional special threats including fragmentation Rapidly adjustable shoulder straps Maximum Waist Size: 62" NIJ 0101.06 Certified V50 – 357sig 125gr TMJ (new) | 1867 ft/s P-BFS Avg. – 357sig 125gr TMJ | 27.3 mm V50 – 44mag 240gr JHP (new) | 1661 ft/s P-BFS Avg. – 44mag 240gr JHP | 36 mm Special Threat tested for fragmentation: V50 - 2gr RCC | 3060 ft/s V50 - 4gr RCC | 2642 ft/s V50 - 16gr RCC | 2244 ft/s V50 - 17gr FSP (.22cal) | 2017 ft/s V50 - 64gr RCC | 1866 ft/s V50 – 9mm 127gr SXT (new) | 1754 ft/s P-BFS Avg. – 9mm 127gr SXT | 24.6 mm P-BFS Avg. – 40cal 165gr S+W Sp GDHP | 27.2 mm P-BFS Avg. – 5.7x28 27gr SS195 | 17 mm P-BFS Avg. – 5.7x28 27gr SS197 | 19.3 mm Dimensions: L 22 in. x W 6 in. x D 0.5 in. Maximum Waist Size: 52" Weight: 1.71 lbs

Tactical Responder Side Armor Pouches from North American Rescue are designed for first responders who are entering unpredictable active shooter situations or facing assault from multiple directions. These rugged nylon pouches allow additional side armor hard plate protection to existing soft armor platforms such as the Rescue Task Force Vest Kit with Side Armor. These rugged nylon pouches accommodate hard armor plates up to 6 in. x 8 in. (not included) and can increase ballistic effectiveness against high caliber threats to Level III or higher. With convenient MOLLE compatibility, these versatile pouches allow hard plates to be positioned properly to fit different user profiles. SPECS: Hard armor plate holder facilitating additional side armor protection Accommodates 6 in. x 8 in. plates (not included) Made of 1000 denier nylon for durability MOLLE compatible with ballistic vest side armor panels Allows hard armor add on to existing soft armor platforms NOTE: Pouch only. Hard armor plates not included Dimensions: L 8.5 in. x H 6.5 in. x D 1 in. Weight: 2.72 oz.

Vanquest FATPack-Pro SMALL B-Side Insert The Vanquest FATPack-Pro Small B-Side Insert is the perfect solution for organizing your medical supplies or essential gear in a tear-away format. Designed with internal loop lining, this insert attaches securely to loop surfaces, offering versatility and convenience by allowing you to repurpose any pack with hook-and-loop surfaces. Main Features: Three vinyl mesh zippered pouches for easy storage (8” x 3.25” x 2.25”) Content label windows for quick gear identification Hi-visibility 210-D ripstop nylon and red Spartan Zipper pulls for durability Semi-transparent vinyl mesh for easy cleaning Front-facing grab handle for quick removal Hook backing for secure attachment Whether you need to transfer your gear between bags or use it as a standalone kit, this insert offers flexibility and efficient organization. Upgrade your pack with this insert to ensure your medical or essential gear is always easily accessible and well-organized. Specifications: Net weight: 0.50 lbs (226 grams) Dimensions: 12” x 8.5” Zippered Pouches: 8” x 3.25” x 2.25” Materials: Hi-visibility 210-D Ripstop nylon, durable RC-Class YKK zippers, high tensile strength nylon webbing

The FATPack-Pro Large B-Side Insert is a great way to add medical organization for your pack with internal loop lining. It attaches directly to a loop surface to provide support of medical or other gear in a tear away format which can be removed or transferred between bags or deployed for stand alone use. Three vinyl mesh zippered pouches 8.5” (W) x 3.75” (H) x 2.25” (D) with content label windows offer storage of injury specific or other needed gear. Semi-transparent vinyl mesh, clear label windows, hi-visibility 210-D ripstop nylon and red Spartan Zipper pulls provide quick and positive ID of your gear. A front facing grab handle allows removal of the secure hook backing which anchors the insert in place.  Ideal upgrade to support medical or other gear for effective and secure organization inside a loop lined pack. Specs & Features Net weight: 0.55 lbs | 249 grams Dimensions: 13.5” (H) x 9.5” (W) Zippered Pouches: 8.5” (W) x 3.75” (H) x 2.25” (D) Content/ ID windows: 1” (H) x 3.75” (W) Dual reinforced top grab handle Rear hook panels allow attachment to any loop-sided surface Materials: Vinyl Mesh laminate semi-transparent and easy to clean Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Durable RC-Class YKK® zippers, reversed for protection Spartan zipper pulls High tensile strength nylon webbing and binding tape

The FATPack-Pro Small A-Side Insert is a great way to add medical organization for your pack with internal loop lining. It attaches directly to a loop surface to provide support of medical or other gear in a tear away format which can be removed or transferred between bags or deployed for stand alone use. Three medium sized elastic loops 4.75” (W) support emergency trauma dressings, burn dressings, compact chest seals, small splints, irrigation kits etc. Wide elastic webbing, hi-visibility DWR coated 210-D ripstop nylon gives you quick ID of your vital gear. Ideal upgrade to support medical or other gear for effective and secure organization inside a loop lined pack. Specs & Features Net weight: 0.15 lbs | 68 grams Dimensions: 11.5” (H) x 5” (W) Elastic Loops (Three): 4.75” (W) Rear hook panels allow attachment to any loop-sided surface Materials: Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Elastic 3” wide webbing provides secure retention of items Finished with high tensile strength bonded nylon thread

The FATPack-Pro Large A-Side Insert is a great way to add medical organization for your pack with internal loop lining. It attaches directly to a loop surface to provide support of medical or other gear in a tear away format which can be removed or transferred between bags or deployed for stand alone use. Two large format elastic loops 7.5” (W) support larger items like full size chest seals, pocket bag valve masks, large pads/dressings, emergency blankets and more. Four medium sized 4.5" (W) elastic loops hold your emergency trauma dressings, burn dressings, compact chest seals etc. Wide elastic webbing, hi-visibility DWR coated 210-D ripstop nylon gives you quick ID of your vital gear. Ideal upgrade to support medical or other gear for effective and secure organization inside a loop lined pack.  Specs & Features Net weight: 0.20 lbs | 90 grams Dimensions: 13” (H) x 6” (W) Large Elastic Loops (Two): 7.5” (W) Elastic Loops (Four): 4.5” (W) Rear hook panels allow attachment to any loop-sided surface Materials: Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Elastic 2” & 3” wide webbing provides secure retention of items Finished with high tensile strength bonded nylon thread

The Logging First Aid & Trauma Kit from North American Rescue is designed as a portable First Aid Kit for the workplace that exceeds OSHA Standard Number: 1910.266 App A - First-aid Kits (Mandatory) for the logging industry. Packaged in a durable dual-latched hard case that is easily transported to the patient's side, this kit offers the ability to treat logging environment injuries with the added benefit of being able to control major bleeding from traumatic injuries with the C-A-T® Tourniquet, the safest and most effective tourniquet on the market today. SPECS Rugged case designed for use in the harshest of conditions Modular system featuring a rugged storage organizer in the lid and removable nylon pouches with easy-to-read treatment labels (Meets Type IV ANSI Container) Fast open dual-latch closure system allows for rapid access while keeping contents secure Able to treat the most common job site injuries with the added benefit of being able to control major bleeding with the safest and most effective Tourniquet on the market Designed with mobility in mind, the kit can be easily carried to the patient's side Kit Contents: 1 x C-A-T® Tourniquet, Orange 1 x 4 in. Responder ETD Emergency Trauma Dressing 2 x Responder Compressed Gauze 2 x Gauze, Pad - 8 in. x 10 in. (Pack of 2) 2 x Gauze, Pad - 4 in. x 4 in. (Pack of 2) 2 x 2 in. Elastic Wrap Bandage 2 x Triangular Bandage 16 x Bandages, 1 in. x 3 in. 1 x BurnTec Dressing - 4 in. x 4 in. 1 x SAM Splint 2 x Pair, Responder Nitrile Gloves - Large 10 x Antiseptic Towelette 10 x Sting & Bite Towelette 1 x CPR Microshield Mask 1 x Eye Wash Solution, 1 oz 2 x Polycarbonate Eye Shield - Orange 2 x Instant Cold Compress - 6 in. x 9 in. 1 x Roll 2 in. Mini Surgical Tape 1 x Splinter Forceps - 4.5 in. 1 x Pair, Responder Trauma Shears - Large 1 x Survival Blanket 1 x Inspection Card 1 x Trauma & First Aid Kit Contents Inventory Card 1 x Just In Time Bleeding Control Instructions 1 x First Aid Pocket Guide 1 x Bleeding Control Dressing (OPTIONAL) Dimensions: L 13.50 in. x H 11.00 in. x D 6.00 in. Weight: 5.66 lbs

The Logging First Aid & Trauma Kit from North American Rescue is designed as a portable First Aid Kit for the workplace that exceeds OSHA Standard Number: 1910.266 App A - First-aid Kits (Mandatory) for the logging industry. Packaged in a convenient zippered nylon bag that is easily transported to the patient's side, this kit offers the ability to treat logging environment injuries with the added benefit of being able to control major bleeding from traumatic injuries with the C-A-T® Tourniquet, the safest and most effective tourniquet on the market today. SPECS Compact size allows for storage in vehicles and machinery Rugged nylon constructed bag keeps contents secure Durable 550 cord pulls Able to treat the most common job site injuries with the added benefit of being able to control major bleeding with the safest and most effective Tourniquet on the market Designed with mobility in mind, the kit can be easily carried to the patient's side Kit Contents: 1 x C-A-T® Tourniquet, Orange 1 x 4 in. Responder ETD Emergency Trauma Dressing 2 x Responder Compressed Gauze 2 x Gauze, Pad - 8 in. x 10 in. (Pack of 2) 2 x Gauze, Pad - 4 in. x 4 in. (Pack of 2) 2 x 2 in. Elastic Wrap Bandage 2 x Triangular Bandage 16 x Bandages, 1 in. x 3 in. 1 x BurnTec Dressing - 4 in. x 4 in. 1 x SAM Splint 2 x Pair, Responder Nitrile Gloves - Large 10 x Antiseptic Towelette 10 x Sting & Bite Towelette 1 x CPR Microshield Mask 1 x Eye Wash Solution, 1 oz 2 x Polycarbonate Eye Shield - Orange 2 x Instant Cold Compress - 6 in. x 9 in. 1 x Roll 2 in. Mini Surgical Tape 1 x Splinter Forceps - 4.5 in. 1 x Pair, Responder Trauma Shears - Large 1 x Survival Blanket 1 x Inspection Card 1 x Trauma & First Aid Kit Contents Inventory Card 1 x Just In Time Bleeding Control Instructions 1 x First Aid Pocket Guide 1 x Bleeding Control Dressing (OPTIONAL) Dimensions: L 13.50 in. x H 11.00 in. x D 6.00 in. Weight: 5.66 lbs

  The Javelin Backpack takes our previous sling design and turns it into a convertible, symmetrical backpack! With the ability to remove one shoulder strap and convert a backpack style carry into a sling, you get two carry options in one compact system. With genuine 1000-D Cordura® on the bottom and high wear areas (500-D in Multicam-Black) coated with DWR, and YKK® RC Class zippers, this bag can handle anything you can throw its way! A padded main compartment and two included dividers provide extra protection for your everyday carry (EDC) items, photography equipment, or range gear. A dedicated tech sleeve that can hold a tablet or laptop up to 14”. High-visibility loop lining provides customizable organization and makes looking for items in low light easier. There are two internal side pockets on the left and right side flaps, with a symmetrical design, you can access these pockets and the main compartment from either the left or right. We adapted the KATARA-16 shoulder strap design to give users flexibility and maximum comfort. Contoured shoulder straps provide excellent ergonomics. The shoulder straps are secured on top with hook-and-loop fasteners and Duraflex G-hooks. This lets you remove and switch shoulder straps to set-up your pack as a right or left-shoulder VSlinger slingpack for quick access. There is also an ambidextrous rear loop lined zippered pocket supporting discreet Hook and Loop Accessory storage. We kept the two external front pockets which gives users loop fields for morale patches, MOLLE webbing real estate for attaching MOLLE pouches/accessories, and provides pockets, elastic slots, and pen slots for organizing daily necessities.  Low profile side Hypalon MOLLE panels allow for any MOLLE compatible accessory to be mounted, making carrying bottles, medical pouches or adding additional volume simple and secure. With 24 total pockets and slots to organize your personal items and everyday carry (EDC) gear the JAVELIN Backpack is THE pack for those who want to be prepared 24/7!  Specs & Features Net Weight: 2.9 pounds | 1315 grams Total Capacity: 18 Liters Overall Exterior Size (Fully Extended): 16" (H) x 12" (W) x 7" (D) Main Compartment (Interior): 15.5" (H) x 10" (W) x 4.75" (D) Top Front Compartment (Interior): 4.5" (H) x 8.5" (W) x 2" (D) Bottom Front Compartment (Interior): 10" (H) x 9.5" (W) x 2" (D) Rear Hook and Loop Accessory Compartment (Interior): 14” (H) x 9” (W) Rear Hook and Loop Accessory 8” zipper opening with 7.5” (H) x 9” (W) loop field Padded quilted sleeve for tablet / laptop up to 14” plus some 15” (max. size 14.25”W x 9.75”D) Full height High-visability quilted loop lining for organization options User configurable updated padded dividers (2) Total 24 organizing compartments and slots MOLLE/PALS spec panels for accessory attachment Materials: 1,000-D Mil-grade Cordura® fabric on the bottom and 500-D for the body treated with Durable Water Repellant Genuine MADE-IN-USA MultiCam-Black Cordura® by Crye Precision™ Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Durable RC-Class YKK® lockable zippers, reversed for protection Hypalon & Cordura MOLLE-Air for MOLLE accessory attachment Mil-grade ITW® and UTX-Duraflex® hardware made from high tensile strength Acetal polymer Spartan molded zipper pulls High tensile strength nylon webbings and binding tapes Finished with high tensile strength bonded nylon thread

 Gen-2 FATPack 4x6 improvements: (1) external built-in tourniquet holders, (2) internal elastic holders for cylindrical items, (3) bottom pull tabs for easy closure. FATPack (First Aid Trauma Pack) is a series of medical packs that offer volume-maximizing storage, and instant accessibility. Access your lifesaving contents with one intuitive downward pull! Available in three sizes: 4x6, 5x8, and 7x10. FATPack 4x6 is 6" (H) x 4.5" (W) x 3" (D). It is the perfect size for your IFAK, Blowout Kit, or trauma-based medical kit. Two external elastic holders secure tourniquets and shears for instant access. Elastic loops over high-viz ripstop pockets in the main compartment’s center and side flaps can secure cylindrical items (e.g. Epipen and airway tubes), saving you precious time when seconds count. User-configurable shock cord storage ladder on the front flap. Sturdy grab handle unzips dual #8 YKK zippers and hook-and-loop fastener. Loop ID panel for blood type or other patches. MOLLE back panel let you attach FATPack using MOLLE Sticks (*optional), or convert it to a hook-and-loop attachment using the MOHL-Air adapter panel (*optional). FATPack’s versatility will make sure your lifesaving gear goes wherever you go! Specs & Features NEW: Three internal elastic webbing bands with two slots for cylindrical items (ex. Epipen, tube) NEW: Two external elastic slots for attaching tourniquet or shears (per side) NEW: Formed grab handle for fast opening with removable red ‘medical’ indicator NEW: Bottom pull tabs for easier closure Size: 6" (H) x 4.5" (W) x 3" (D) Weight: 4.2 ounces Four internal high-vis ripstop storage pockets User-configurable storage ladder with shock cord retention. 2” (H) x 3” (W) ID/Blood type loop patch panel on front. MOLLE/PALS webbing on rear for modular attachment. Compatible with MOLLE Sticks & MOHL-Air adapter for loop panel attachment. Includes 2 one-wrap hook & loop anchors for gear retention. Materials:1,000-D Cordura® fabric with water-repellent DuPont® Teflon® fabric protector. Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon interior. Durable & abrasion resistant RC-Class YKK® #8 zippers, reversed for protection. Circular user-friendly paracord zipper loops. High tensile strength nylon webbings and binding tapes. Finished with high tensile strength bonded nylon thread.

The standard casualty response bag which meets the requirements for the SAR Level A Medical Bag. Designed to meet the rigorous requirements of the U. S. Navy Search and Rescue (SAR) Swimmers. Ergo dynamic, low profile & durable casualty response bag constructed of Berry Amendment 500D CORDURA® solution dyed nylon with GhillieTEX™ hardware for near IR signature reduction and sand/water resistant, self repairing zippers with silent 550 cord pulls. Featuring 6 hook-and-loop internal pouches in various sizes which can be self labeled for the specific mission set; 4 smaller pouches for hemorrhage control products and 2 larger ones to accommodate airway & intravenous products.  Designed to be hung in aircraft or other transport vehicle by top bag handle.  SPECIFICATIONS: NATO NSN: 8465-01-669-5796 Designed to be hung in aircraft or other transport vehicle by top bag handle Ergo dynamic, low profile & durable casualty response bag constructed of Berry Amendment 500D CORDURA® solution dyed nylon GhillieTEX™ hardware for near IR signature reduction and sand/water resistant, selfrepairing zippers with silent 550 cord pulls Featuring 6 hook-and-loop internal pouches in various sizes which can be self labeled for the specific mission set  DIMENSIONS H 24 in. x W 15 in. x D 7 in. Weight: 5 lb 10 oz  

Main body with peripheral zipper for a total opening. Central tab and two lateral bodies formed by eleven pockets designed to facilitate the classification of sanitary material (five of grid and six of transparent material). It also has two large capacity side pockets developed to carry the diagnostic material, in addition to two front external pockets: the upper one designed for self-protection material and the lower one suitable to accommodate any type of defibrillator. It also has a lower pocket with a waterproof cover to protect it from extreme rains. Made of tarpaulin, which gives the product impermeability and easy cleaning and disinfection both outside and inside. Characteristics Ergonomic main handle with Velcro closure. Wide side pockets on both sides. Padded and adjustable backpack straps. Padded trellis. Large front pocket prepared to accommodate the defibrillator. Fold-out interior for convenient and quick access to the instruments. Internal network compartments and with transparent window. Waterproof backpack cover. Technical data Weight (approx.) 2.7 lb Dimensions (approx.) 10.6 W × 15 H × 16.5 L  Material: TARPAULIN Capacity (Liters) (Approx.) 43,09

The M-10 Medical Backpack provides enhanced internal capacity, additional external PALS webbing to attach accessory pouches, new internal pouch options, and additional operational capabilities while maintaining the slimline design of TSSi’s highly acclaimed M-9. Features: The TACOPS™ M-10 ALPHA comes with four square mesh pouches, an instrument panel, and padded shoulder straps Coyote Tan, Ranger Green, Multi-Cam® come with Coyote Tan Pouches Black, Red comes with Black Pouches External dimensions: 23”L x 13”W x 4”H The bottom pouch can be shortened using the compression straps to custom-configure the pack’s profile to the load out Optional accessories enable the M-10 to be jumpable, to internally carry a standard D/M-15 oxygen bottle, or to externally carry additional equipment or IV solutions  Here is a side by side comparison of the M-10 and our original TACOPS® M-9 Assault Medical Backpack. SEE JUST HOW MUCH THE TACOPS® M-10 MEDICAL BACKPACK CAN HOLD! M-10 MEDICAL BACKPACK VS. M-9 ASSAULT MEDICAL BACKPACK M-10 MEDICAL BACKPACK 6 rows of PALS webbing with 7 slots each on main flap 2 columns of PALS webbing on side Extended Velcro® for identifiers on main flap Multiple pouch options: Square Mesh, Square Vinyl, Rectangle Mesh 780 cu inches in main compartment 416 cu inches in bottom pouch Internal attachment points for additional gear Dimensions: 23" x 13" x 4" Weight: 3.5 lbs.* Stock Colors Available: Coyote, Ranger Green, MultiCam®, Black M-9 ASSAULT MEDICAL BACKPACK 3 rows of PALS webbing with 5 slots each on main flap 1 column of PALS webbing on side 2 inch x 3 inch Velcro® patch on main flap Currently 1 pouch option: Rectangle Mesh 585 cu inches in main compartment 195 cu inches in bottom pouch No internal attachment points for additional gear Dimensions: 20" x 13" x 3" Weight: 3.4 lbs.* Stock Colors Available: Coyote, Ranger Green, ACU, MultiCam®, Red, Black

The M-10 Medical Backpack provides enhanced internal capacity, additional external PALS webbing to attach accessory pouches, new internal pouch options, and additional operational capabilities while maintaining the slimline design of TSSi’s highly acclaimed M-9. Features: The TACOPS™ M-10 BRAVO comes with four square vinyl pouches, an instrument panel, and padded shoulder straps Coyote Tan, Ranger Green, Multi-Cam® come with Coyote Tan Pouches Black, Red comes with Black Pouches External dimensions: 23”L x 13”W x 4”H The bottom pouch can be shortened using the compression straps to custom-configure the pack’s profile to the load out Optional accessories enable the M-10 to be jumpable, to internally carry a standard D/M-15 oxygen bottle, or to externally carry additional equipment or IV solutions  Here is a side by side comparison of the M-10 and our original TACOPS® M-9 Assault Medical Backpack. SEE JUST HOW MUCH THE TACOPS® M-10 MEDICAL BACKPACK CAN HOLD! M-10 MEDICAL BACKPACK VS. M-9 ASSAULT MEDICAL BACKPACK M-10 MEDICAL BACKPACK 6 rows of PALS webbing with 7 slots each on main flap 2 columns of PALS webbing on side Extended Velcro® for identifiers on main flap Multiple pouch options: Square Mesh, Square Vinyl, Rectangle Mesh 780 cu inches in main compartment 416 cu inches in bottom pouch Internal attachment points for additional gear Dimensions: 23" x 13" x 4" Weight: 3.5 lbs.* Stock Colors Available: Coyote, Ranger Green, MultiCam®, Black M-9 ASSAULT MEDICAL BACKPACK 3 rows of PALS webbing with 5 slots each on main flap 1 column of PALS webbing on side 2 inch x 3 inch Velcro® patch on main flap Currently 1 pouch option: Rectangle Mesh 585 cu inches in main compartment 195 cu inches in bottom pouch No internal attachment points for additional gear Dimensions: 20" x 13" x 3" Weight: 3.4 lbs.* Stock Colors Available: Coyote, Ranger Green, ACU, MultiCam®, Red, Black

The M-10 Medical Backpack provides enhanced internal capacity, additional external PALS webbing to attach accessory pouches, new internal pouch options, and additional operational capabilities while maintaining the slimline design of TSSi’s highly acclaimed M-9. Features: The TACOPS™ M-10 CHARLIE comes with four rectangle mesh pouches, an instrument panel, and padded shoulder straps Coyote Tan, Ranger Green, Multi-Cam® come with Coyote Tan Pouches Black, Red comes with Black Pouches External dimensions: 23”L x 13”W x 4”H The bottom pouch can be shortened using the compression straps to custom-configure the pack’s profile to the load out Optional accessories enable the M-10 to be jumpable, to internally carry a standard D/M-15 oxygen bottle, or to externally carry additional equipment or IV solutions  Here is a side by side comparison of the M-10 and our original TACOPS® M-9 Assault Medical Backpack. SEE JUST HOW MUCH THE TACOPS® M-10 MEDICAL BACKPACK CAN HOLD! M-10 MEDICAL BACKPACK VS. M-9 ASSAULT MEDICAL BACKPACK M-10 MEDICAL BACKPACK 6 rows of PALS webbing with 7 slots each on main flap 2 columns of PALS webbing on side Extended Velcro® for identifiers on main flap Multiple pouch options: Square Mesh, Square Vinyl, Rectangle Mesh 780 cu inches in main compartment 416 cu inches in bottom pouch Internal attachment points for additional gear Dimensions: 23" x 13" x 4" Weight: 3.5 lbs.* Stock Colors Available: Coyote, Ranger Green, MultiCam®, Black M-9 ASSAULT MEDICAL BACKPACK 3 rows of PALS webbing with 5 slots each on main flap 1 column of PALS webbing on side 2 inch x 3 inch Velcro® patch on main flap Currently 1 pouch option: Rectangle Mesh 585 cu inches in main compartment 195 cu inches in bottom pouch No internal attachment points for additional gear Dimensions: 20" x 13" x 3" Weight: 3.4 lbs.* Stock Colors Available: Coyote, Ranger Green, ACU, MultiCam®, Red, Black

The M-10 Medical Backpack provides enhanced internal capacity, additional external PALS webbing to attach accessory pouches, new internal pouch options, and additional operational capabilities while maintaining the slimline design of TSSi’s highly acclaimed M-9. Features: The TACOPS™ M-10 DELTA comes with two square pouches, and two rectangle mesh pouches, an instrument panel, and padded shoulder straps Coyote Tan, Ranger Green, Multi-Cam® come with Coyote Tan Pouches Black, Red comes with Black Pouches External dimensions: 23”L x 13”W x 4”H The bottom pouch can be shortened using the compression straps to custom-configure the pack’s profile to the load out Optional accessories enable the M-10 to be jumpable, to internally carry a standard D/M-15 oxygen bottle, or to externally carry additional equipment or IV solutions  Here is a side by side comparison of the M-10 and our original TACOPS® M-9 Assault Medical Backpack. SEE JUST HOW MUCH THE TACOPS® M-10 MEDICAL BACKPACK CAN HOLD! M-10 MEDICAL BACKPACK VS. M-9 ASSAULT MEDICAL BACKPACK M-10 MEDICAL BACKPACK 6 rows of PALS webbing with 7 slots each on main flap 2 columns of PALS webbing on side Extended Velcro® for identifiers on main flap Multiple pouch options: Square Mesh, Square Vinyl, Rectangle Mesh 780 cu inches in main compartment 416 cu inches in bottom pouch Internal attachment points for additional gear Dimensions: 23" x 13" x 4" Weight: 3.5 lbs.* Stock Colors Available: Coyote, Ranger Green, MultiCam®, Black M-9 ASSAULT MEDICAL BACKPACK 3 rows of PALS webbing with 5 slots each on main flap 1 column of PALS webbing on side 2 inch x 3 inch Velcro® patch on main flap Currently 1 pouch option: Rectangle Mesh 585 cu inches in main compartment 195 cu inches in bottom pouch No internal attachment points for additional gear Dimensions: 20" x 13" x 3" Weight: 3.4 lbs.* Stock Colors Available: Coyote, Ranger Green, ACU, MultiCam®, Red, Black

The M-10 Medical Backpack provides enhanced internal capacity, additional external PALS webbing to attach accessory pouches, new internal pouch options, and additional operational capabilities while maintaining the slimline design of TSSi’s highly acclaimed M-9. Features: The TACOPS™ M-10 ECHO comes with two vinyl square pouches, and two rectangle mesh pouches, an instrument panel, and padded shoulder straps Coyote Tan, Ranger Green, Multi-Cam® come with Coyote Tan Pouches Black, Red comes with Black Pouches External dimensions: 23”L x 13”W x 4”H The bottom pouch can be shortened using the compression straps to custom-configure the pack’s profile to the load out Optional accessories enable the M-10 to be jumpable, to internally carry a standard D/M-15 oxygen bottle, or to externally carry additional equipment or IV solutions  Here is a side by side comparison of the M-10 and our original TACOPS® M-9 Assault Medical Backpack. SEE JUST HOW MUCH THE TACOPS® M-10 MEDICAL BACKPACK CAN HOLD! M-10 MEDICAL BACKPACK VS. M-9 ASSAULT MEDICAL BACKPACK M-10 MEDICAL BACKPACK 6 rows of PALS webbing with 7 slots each on main flap 2 columns of PALS webbing on side Extended Velcro® for identifiers on main flap Multiple pouch options: Square Mesh, Square Vinyl, Rectangle Mesh 780 cu inches in main compartment 416 cu inches in bottom pouch Internal attachment points for additional gear Dimensions: 23" x 13" x 4" Weight: 3.5 lbs.* Stock Colors Available: Coyote, Ranger Green, MultiCam®, Black M-9 ASSAULT MEDICAL BACKPACK 3 rows of PALS webbing with 5 slots each on main flap 1 column of PALS webbing on side 2 inch x 3 inch Velcro® patch on main flap Currently 1 pouch option: Rectangle Mesh 585 cu inches in main compartment 195 cu inches in bottom pouch No internal attachment points for additional gear Dimensions: 20" x 13" x 3" Weight: 3.4 lbs.* Stock Colors Available: Coyote, Ranger Green, ACU, MultiCam®, Red, Black

The medical fill kits sold by MED-TAC International offer various supplies related to the emergency responder sector of the medical field. We offer a series of fill kits that are tailored to meet the demands of any situation varying from basic first aid to advanced life support trained paramedics. Each of these kits can be purchased as a stand-alone kit or added to any of our bags We have designed the contents of each of these kits after hours of research and feedback from our customers and professional EMS personnel in the field. Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. In the event that one of these five kits does not meet your requirements, we would be happy to assemble a customized kit built to your exact specifications. We stock a variety of medical supplies that can be purchased separately or added to any custom kit. Just give us a call and let us know what kind of kit you need! Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. The FOXTROT kit includes the following supplies: Trauma Shears Tweezers Kelly Hemostats Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50) 2″ Roll Gauze (2) 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape 2″ Roll Cloth Tape Iodine Wipes (10) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (4) Eye Pads (2) Triangle Bandage (4) Eye Wash Irrigation Solution Exam Gloves (8) Universal SAM Finger Splint (2) Oral Glucose Gel Sting & Bite Relief Pads (10) Digital Automatic Blood Pressure Cuff Premium Cardiology Stethoscope CPR Mask (2) Berman Airways Kit (6) 10″ x 30″ Multi Trauma Dressing (2) Bag Valve Mask (MPR) 4-1/4″ x 36″ Roll Splint (2) 4″ x 4″ Transparent Chest Seal Adjustable Cervical Collar 2oz Burn Spray 2oz First Aid Antiseptic Spray Emergency Mylar Blanket (2) QuickStop Hemostatic Spray (1.69oz) QuickClot 4″ x 4″ EMS Bandage C.A.T. Tourniquet 4″ x 4″ Burn Dressing (2) Tongue Depressor (2) Suture Set First Aid Guide Digital Thermometer Thermometer Sheath (2) Israeli Bandage 4″ Folding Pocket Knife Fingertip Pulse Ox Nasal Airway Kit

The medical fill kits sold by MED-TAC International offer various supplies related to the emergency responder sector of the medical field. We offer a series of fill kits that are tailored to meet the demands of any situation varying from basic first aid to advanced life support trained paramedics. Each of these kits can be purchased as a stand-alone kit or added to any of our bags We have designed the contents of each of these kits after hours of research and feedback from our customers and professional EMS personnel in the field. Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. In the event that one of these five kits does not meet your requirements, we would be happy to assemble a customized kit built to your exact specifications. We stock a variety of medical supplies that can be purchased separately or added to any custom kit. Just give us a call and let us know what kind of kit you need! Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. The ALPHA KIT makes for a great fill kit for a basic first aid kit, you can use it to fill your basic first aid bag or have it as a backup to refill your first aid kit  The ALPHA kit includes the following supplies: Tweezers Kelly Hemostats Trauma Shears Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50) 2″ Roll Gauze (2) 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) 4″ x 4″ Burn Dressing (2) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Eye Pads (2) Triangle Bandage (2) Eye Wash Irrigation Solution Exam Gloves (4) Universal SAM Finger Splint Oral Glucose Gel Sting & Bite Relief Pads (10) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape Iodine Wipes (10)

The medical fill kits sold by MED-TAC International offer various supplies related to the emergency responder sector of the medical field. We offer a series of fill kits that are tailored to meet the demands of any situation varying from basic first aid to advanced life support trained paramedics. Each of these kits can be purchased as a stand-alone kit or added to any of our bags We have designed the contents of each of these kits after hours of research and feedback from our customers and professional EMS personnel in the field. Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. In the event that one of these five kits does not meet your requirements, we would be happy to assemble a customized kit built to your exact specifications. We stock a variety of medical supplies that can be purchased separately or added to any custom kit. Just give us a call and let us know what kind of kit you need! Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. The BRAVO kit includes the following supplies: Tweezers Kelly Hemostats Trauma Shears Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50) 2″ Roll Gauze (2), 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Isopropyl Alcohol Wipes (10) Eye Pads (2) Triangle Bandage (2) Eye Wash Irrigation Solution Exam Gloves (4) Universal SAM Finger Splint Oral Glucose Gel Sting & Bite Relief Pads (10) Adult Blood Pressure Cuff w/ Case Sprague Stethoscope CPR Mask Oropharyngeal Airway Kit (6) Iodine Wipes (10) 4″ x 4″ Burn Dressing (2)

The medical fill kits sold by MED-TAC International offer various supplies related to the emergency responder sector of the medical field. We offer a series of fill kits that are tailored to meet the demands of any situation varying from basic first aid to advanced life support trained paramedics. Each of these kits can be purchased as a stand-alone kit or added to any of our bags We have designed the contents of each of these kits after hours of research and feedback from our customers and professional EMS personnel in the field. Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. In the event that one of these five kits does not meet your requirements, we would be happy to assemble a customized kit built to your exact specifications. We stock a variety of medical supplies that can be purchased separately or added to any custom kit. Just give us a call and let us know what kind of kit you need! Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. The CHARLIE kit includes the following supplies: Tweezers Kelly Hemostats Trauma Shears Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50) 2″ Roll Gauze (2) 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Eye Pads (2) Triangle Bandage (2) Eye Wash Irrigation Solution Exam Gloves (4) Universal SAM Finger Splint Oral Glucose Gel Adult Blood Pressure Cuff Sprague Stethoscope CPR Mask, Berman Airways Kit(6) 10″ x 30″ Trauma Dressing Nasal Cannula Tubing (2) Non-Rebreather Mask (2) Bag Valve Mask (MPR) 4-1/4″ x 36″ Roll Splint 4″ x 4″ Transparent Chest Seal Adjustable Cervical Collar 2oz Burn Spray w/ Lidocaine 2oz First Aid Antiseptic Spray Emergency Blanket Quick Stop Hemostatic Blood Stop Spray CAT Tourniquet Iodine Wipes (10) 4″ x 4″ Burn Dressing (2) Sting & Bite Relief Pads (10) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape

The medical fill kits sold by MED-TAC International offer various supplies related to the emergency responder sector of the medical field. We offer a series of fill kits that are tailored to meet the demands of any situation varying from basic first aid to advanced life support trained paramedics. Each of these kits can be purchased as a stand-alone kit or added to any of our bags We have designed the contents of each of these kits after hours of research and feedback from our customers and professional EMS personnel in the field. Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. In the event that one of these five kits does not meet your requirements, we would be happy to assemble a customized kit built to your exact specifications. We stock a variety of medical supplies that can be purchased separately or added to any custom kit. Just give us a call and let us know what kind of kit you need! Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. The DELTA kit includes the following supplies: Tweezers Kelly Hemostats Trauma Shears Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50) 2″ Roll Gauze (2) 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Eye Pads (2) Triangle Bandage (2) Eye Wash Irrigation Solution Exam Gloves (4) Universal SAM Finger Splint Oral Glucose Gel Sting & Bite Relief Pads (10) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape Adult Blood Pressure Cuff Sprague Stethoscope CPR Mask, Berman Airways Kit(6) 10″ x 30″ Trauma Dressing Nasal Cannula Tubing (2) Non-Rebreather Mask (2) AMBU Bag 4-1/4″ x 36″ Roll Splint 4″ x 4″ Transparent Chest Seal Adjustable Cervical Collar 2oz Burn Spray w/ Lidocaine 2oz First Aid Antiseptic Spray Emergency Blanket Quick Stop Hemostatic Blood Stop Spray Tourniquet Aluminum D Oxygen Cylinder w/ Post Valve Oxygen Regulator 0-15lpm Iodine Wipes (10) 4″ x 4″ Burn Dressing (2)

The medical fill kits sold by MED-TAC International offer various supplies related to the emergency responder sector of the medical field. We offer a series of fill kits that are tailored to meet the demands of any situation varying from basic first aid to advanced life support trained paramedics. Each of these kits can be purchased as a stand-alone kit or added to any of our bags We have designed the contents of each of these kits after hours of research and feedback from our customers and professional EMS personnel in the field. Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. In the event that one of these five kits does not meet your requirements, we would be happy to assemble a customized kit built to your exact specifications. We stock a variety of medical supplies that can be purchased separately or added to any custom kit. Just give us a call and let us know what kind of kit you need! Every one of our medical fill kits is assembled in-house by our friendly staff, including many current and former first responders. This kit is designed not only for First Responders but also anyone who may have a respiratory problem and need oxygen at home. Knowing that you have immediate access to oxygen in an emergency situation gives you an unequaled peace of mind.  The ECHO kit includes the following supplies:  Aluminum D Oxygen Cylinder w/ Post Valve Oxygen Regulator 0-15lpm AMBU Bag Non-Rebreather Mask (2) Nasal Cannula Tubing (2) Berman Airway Kit Cylinder Wrench

The new MB15 MedSling packs are versatile shoulder bags with a practical design and a tactical feel that can be used in multiple applications. Real-world uses include military, law enforcement, EMS, special events first-aid, gun range, hiking, fishing, or as a general day bag.  The MB15 fits over one shoulder with an adjustable, ergonomic padded shoulder strap, which is also removable with two quick-release buckles. Each side flap, main cover, and two side compartments include nylon webbing MOLLE loops which provide multiple options for attaching gear and storing tools.  The front three rows of MOLLE loops are covered in hook & loop material for attaching nameplates and custom patches. The main compartment opens to reveal four elastic mesh pouches, two zippered pockets, three pencil pouches, and three elastic loops.  Two dual-zippered side compartments will hold a standard water bottle, but also include mesh pouches and elastic loops so they can be customized to fit the user's needs. Dimensions: 14 × 6 × 9 in The ALPHA kit includes the following supplies: Tweezers Kelly Hemostats Trauma Shears Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″ x 4″ Gauze Pads (50) 2″ Roll Gauze (2) 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) 4″ x 4″ Burn Dressing (2) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (2) Eye Pads (2) Triangle Bandage (2) Eye Wash Irrigation Solution Exam Gloves (4) Universal SAM Finger Splint Oral Glucose Gel Sting & Bite Relief Pads (10) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape Iodine Wipes (10)

The most complete gunshot & trauma IFAK available. All the supplies you need, none that you don’t. We use genuine name brand products! Here’s the breakdown…THE BAG: The LXPB35 is a premium MOLLE tactical pouch designed for use as a gunshot response kit, survival kit, or IFAK (individual first aid kit). With built-in modular webbing straps, it will attach to any bag, vest or pack with a MOLLE platform. The PB35 has a quick access flap that opens 180 degrees to reveal four individual storage flaps that lie completely flat once opened. This allows for easy one-handed access to all of your supplies in an emergency situation. Every feature in this pouch is dupli­cated, including double layer construction, two rows of two layers of elastic loops, dual depth pockets, and double layered laser cut MOLLE platform with loop material for morale patches and tool storage. The front flap has fully adjustable corded loops with drawstring fastener to secure smaller items. Includes a rubber red cross patch with hook and loop material sewn on.  THE KIT: NAR Hyfin Vent Chest Seal Twin Pack Compact NAR C-A-T Tourniquet Gen 7 Black Nitrile Tactical Gloves (2 pairs) Israeli Military Pressure Bandage 4″ Compressed Krinkle Gauze 4″ x 4″ Burn Dressing 5″ x 9″ ABD Pad Nasal Airway 28FR Quick Clot Combat Gauze Z-Folded LE 3″ x 4yd, 7.5″ Emergency Trauma Shears Emergency Survival Foil Blanket 2″ Woven Elastic Bandage w/ Clips 2″ Tactical Black Self-Adherent Gauze 2″ Conforming Stretch Roll Gauze 3″ Conforming Stretch Roll Gauze 4″ Conforming Stretch Roll Gauze. Pouch Dimensions CLOSED: 9″ (L) x 7″ (W) x 4.5″ (H) – [excluding the pull handle]

Compare to those "famous" $700 pack kits being marketed to civilians elsewhere on the internet! The LXMB45 Modular Tactical Medic Backpack is the culmination of two years of research, design and customer feedback leading to a practical and useful EMS bag for the tactical market. Far too often, tactical medics are forced to buy a military bag with no EMS features, or an EMS bag with no tactical features. Now you can have the best of both worlds, with a well-organized and great looking bag all-in-one. The MB45 comes with four grab-n-go pouches with transparent windows, all of which are completely removable or interchangeable within the main compartment. The First Response Backpack Kit has been packed with a huge assortment of first aid gear making this the ideal bag for BLS First Responders, boaters, construction workers, office staff, corporate first aid teams, outdoorsmen, families, really anyone looking to upgrade the medical response capabilities. THE KIT:  Tweezers Kelly Hemostats Trauma Shears Bandage Shears Penlight Ammonia Ampules (10) Band-Aids (100) 4″x4″ Gauze Pads (50) 2″ Roll Gauze (2) 3″ Roll Gauze (2) 4″ Roll Gauze (2) 2″ Self-Adherent Bandage (2) 2″ Elastic Ace Bandage (2) 5″ x 9″ ABD Pad (2) 8″ x 10″ ABD Pad (2) 1″ Roll Cloth Tape 2″ Roll Cloth Tape Iodine Wipes (10) Isopropyl Alcohol Wipes (10) Triple Antibiotic Ointment 1/2 oz Instant Cold Packs (4) Eye Pads (2) Triangle Bandage (4) Eye Wash Irrigation Solution Exam Gloves (8) Universal SAM Finger Splint (2) Oral Glucose Gel Sting & Bite Relief Pads (10) Digital Automatic Blood Pressure Cuff Premium Cardiology Stethoscope CPR Mask (2) Berman Airways Kit (6) 10″ x 30″ Multi Trauma Dressing (2) Bag Valve Mask (MPR) 4-1/4″ x 36″ Roll Splint (2) 4″ x 4″ Transparent Chest Seal Adjustable Cervical Collar 2oz Burn Spray w/ Lidocaine 2oz First Aid Antiseptic Spray Emergency Mylar Blanket (2) QuickStop Hemostatic Spray (1.69oz) QuickClot 4″ x 4″ EMS Bandage, CAT Tourniquet Petroleum Burn Dressing 3″ x 9″ (2) Tongue Depressor (2) Suture Set First Aid Guide Digital Thermometer Thermometer Sheath (2), Israeli Bandage 4″ Folding Pocket Knife Fingertip Pulse Ox, Nasal Airway Kit

The LXPB50 vehicle first aid kit arrives pre-stocked with all of the supplies neatly arranged in the bag for you, so as soon as you open the box you’re ready to go. A real live person at our facility hand packs every single item into this kit, one at a time, so you can be assured that great care is taken to ensure that every kit is made right. The LXPB50 Vehicle First Aid Kit includes the following items: LXPB50 Rip-Away MOLLE First Aid Bag (1) Instant Cold Pack 100 gram (2) 7.5″ Emergency Trauma Shears (1) Black Nitrile Medical Gloves, Size Large in Pocket Pack (4 Pairs) Emergency Foil Survival Blanket 52″ x 84″ (1), Triangle Bandage w/ Safety Pins (1) Oral Glucose 15 gram for Diabetic Emergencies (1 tube) Universal Foam/Aluminum Finger Splint (1) Splinter Forcep/Tweezer (1) Smelling Salts/Ammonia Ampules for Fainting (Pack of 10) Alcohol Prep Pads (10), Iodine Wipes (10) Sting & Bite Relief Pads (10) Individually Wrapped Tongue Depressor (1) Curad QuickStop Bleeding Control Spray 1.69oz (1 can) Eye Wash Irrigation Solution 1oz Bottle (1) CPR Barrier Shield w/ One-Way Valve (1) Cloth Medical Tape 1″ (1 Roll) Woven Elastic Bandage w/ Clips 2″ x 5yd (1) Conforming Stretch Gauze 4″ x 5yd (1) Digital Thermometer (1 Premium L.E.D. Pen Light (1) 5″ x 9″ ABD Trauma Pad (2) 8″ x 10″ ABD Trauma Pad (2) Oval Eye Pad (2) 3″ x 3″ Gauze Pad (5 Packs of 2 Pads) First Aid Pocket Guide (1) 1″ x 3″ HD Fabric Finger Bandages (18), 1-3/4″ x 2″ HD Fabric Fingertip Bandages (4) 1-1/2″ x 3″ HD Fabric Knuckle Bandages (4) 2″ x 3-3/4″ X-Large HD Fabric Bandages (4) Aspirin Tablets (2 Packs of 2) Ibuprofen Tablets (2 Packs of 2), Diotame (Upset Stomach) Tablets (2 Packs of 2) Lubricating Eye Drops (2 Vials) Triple Antibiotic Ointment .9g (4 Packets) Hydrocortisone Cream .9g (4 Packets) Multi-Symptom Cold Relief Tablets (2 Packs of 2) XeroBurn Burn Gel 3.5g (2 Packets) Diphen (Allergy Relief) Tablets (2 Packs). MEDIC-X Vehicle Trauma Kit Pouch is designed to universally attach to any vehicle headrest, or alternately any MOLLE compatible gear or bag with at least 5 rows of loops. The main bag attaches to the rear base via a hook & loop panel so that it can be easily removed in the event of an emergency with only the pull of your hand. Additionally, the bag can be opened while still attached to the base on a headrest and three-tiered panels are revealed. The top two panels have various sizes of elastic tool loops in addition to pockets for storing supplies. The bottom panel is a zippered mesh compartment that is also easily removable via the hook & loop attachment to the bag. The rear attachment panel is reinforced so that it is strong enough to attach to the headrest or bag without sagging, but is pliable enough to contour to the shape of your headrest. Finally, the front of the bag is covered with a laser-cut hook & loop MOLLE panel for storing additional tools, mounting morale patches, or attaching additional MOLLE gear. This panel comes with a rubber RED CROSS emblem included with the bag. With dimensions of 10.25″L x 4″W x 7.5″H, this bag is large enough to hold a well-equipped gunshot/hemorrhage kit, or a multi-person first aid kit. Includes a limited lifetime warranty from Lightning X Products.    

Waterproof Hi-Vis Dry Bag The Lightning-X Waterproof Hi-Vis Dry Bag is a high-quality solution for keeping your first aid kit or medical supplies safe and dry in any environment.  It is designed for adventurers, overland explorers, boaters, or anyone who just likes to keep their gear dry! Main Features: Waterproof and Airtight: Designed to withstand water, moisture, and humidity, ensuring your supplies stay protected. Floating Capability: Even when fully loaded, this dry bag will float when properly sealed, perfect for boating or water-related activities. Heat Welded Seams: With no stitches, the bag offers superior protection against air and water penetration. High Visibility Design: Stand out with the black bag featuring hi-vis fluorescent yellow lettering and webbing. Convenient Size: Measures 12″(H) x 7″(W) x 5″(D) when opened and 8″(H) x 7″(W) x 5″(D) when closed, providing ample space for your essentials. Removable Shoulder Strap: For easy carrying and transport wherever you go.

Hard Case emergency first aid kit for treating injuries on the range This kit features the LXHC75 Air Tight Water Tight hard case with custom molded foam insert, pre-stocked with our LXSMK-R Gun Range Trauma & Bleeding First Aid Kid. Ideal for gun ranges, police departments, hunters, survivalists, campers and many more industries. This kit comes with the supplies necessary to provide life saving first aid in the event of major punctures, cuts or burns in a pre-hospital environment, without the added extras that most first aid kits come with that typically just get in the way. You will receive the kit with all of the supplies already installed in the custom foam insert. You can also buy this case with the universal pluckable foam so that you can arrange the supplies according to your own needs. Kit includes the following items:  C-A-T Tourniquet by North American Rescue Black ARS Chest Decompression Needle, 14g, by North American Rescue Hyfin Vent Chest Seal Twin Pack by North American Rescue Premium CPR Mask with Hard Case Black Emergency Survival Foil Blanket, 52″ x 82″ Silver Cohesive Self Adherent Bandage Roll ” 2″ x 5yd  Black Burn Relief Gel Dressing 4″ x 4″ Compressed Krinkle Gauze  4.5″ x 4.1yd Black Tactical Nitrile Gloves in Poly Bag 4 Pairs 7.5″ Emergency Trauma/Bandage Shear Black Handle Universal Foam Aluminum Core Roll Splint 4.5″ x 36″ Tactical Black/Grey QuikClot 25 Gram Hemostatic Clotting Sponge QuikClot 4″ x 4″ Hemostat Dressing 4-Ply Nasopharyngeal Airway Size 28FR Individually Wrapped Israeli Emergency Military Pressure Bandage 4″ Lightning X First Aid Guide Booklet Lightning X Air Tight Water Tight Hard Case 14″ Custom Cut Foam Insert for Range Kit Black/Grey

The five-piece modular TTMB (Tiered Trauma Medical Bag) targets the military medic's requisite that offers countless load carriage platform options for mission specific applications. This ensemble offers load carriage platform options for mission specific applications, including a low profile backpack style aid bag, a re-supply bag, a medical chest pouch, and a leg rig conversion panel with a MOLLE directional conversion panel. T he ample re-supply bag includes modular medical supply pouches that can be used to re-stock both the aid bag and chest pouch. The leg rig conversion and MOLLE directional conversion panels allow the chest pouch to be mounted and carried using a drop-down leg attachment style platform. SPECS: 5 piece modular system with interchangeable inner pouches compatible with any Hook-&-Loop attachment system Removable labels aid in the organization of mission critical medical equipment Constructed of 500D CORDURA® Berry Amendment Nylon, solution dyed for near IR signature reduction GhillieTEX hardware, sand & water resistant self-repairing zippers & silent 550 cord pulls Includes low-profile back pack style aid bag, ample re-supply bag, medical chest pouch, leg rig conversion and MOLLE directional conversion panels Bags only. Medical equipment is not included Available in MULTICAM only Kit Contents: 1 x Resupply Bag 1 x Aid Bag 1 x Chest Pouch 1 x Leg Rig Conversion Panel 1 x MOLLE Directional Conversion Panel Dimensions: Resupply Bag: H 20 in. x W 15 in. x D 5 in. Aid Bag: H 19 in. x W 15 in. x D 7 in. Chest Pouch: H 7.75 in. x W 9.75 in. x D 4.5 in Leg Rig Conversion Panel: L 14 in. x W 6 in. MOLLE Directional Conversion Panel: L 7.5 in. x W 6 in. Total Weight: 9 lb. 2 oz.

Our most compact, half size First Aid Kit empowering Expeditionary Military First Responders with the most requested point-of-wounding equipment in the smallest cube space possible. The EFAK, North American Rescue's Expeditionary First Aid Kit, was designed to be the most compact, multi-use IFAK for delivering immediate critical care for penetrating, blast or other traumatic injuries. At half the size of our popular T.O.R.K. platform, the EFAK is currently the smallest platform available in our product offering. Despite its reduced size, this kit comes fully loaded with the critical medical equipment most requested by Expeditionary Military First Responders operating in the line of duty. Treatment pack out is the Advanced version meeting the Expeditionary Military First Responder Requirements. The EFAK’s super compact, 500 Denier nylon bag opens from the side in a clam shell configuration utilizing (2) two main sleeves that open on both ends for easy access and features multiple elastic loops for secure gear organization. The bag’s exterior includes a MOLLE backing for mounting in the standard vertical position as well as a 3 in. internal sleeve for accommodating horizontal attachment to your duty belt. The vertical mount can be set to open left-to-right or right-to-left based on shooter preference. The TQ/Holder is attached to the (3) three MOLLE strips on the opposite side of the zipper opening. The EFAK also comes with an additional TQ Holder and Tourniquet for primary placement separate from the EFAK, meeting the (2) Tourniquet Expeditionary Military requirement. Also included is a loop patch on front of the bag for custom user labeling. SPECS: NAR's most compact, versatile Expeditionary First Aid Kit Designed to meet the Expeditionary Military Forces First Responder requirements for critical point-of-wounding, treating penetrating, blast or other traumatic injuries in the line of duty Super compact, rugged nylon platform that allows attachment both vertically and horizontally Treatment pack out option: Advanced Smaller, more compact size for ease of placement with other Military gear on the First Responder Half the size of our popular T.O.R.K platform Kit Contents: 1 x C-A-T® (Combat Application Tourniquet®) Black 1 x Tourniquet Holder externally MOLLE 1 x 4 in. Flat ETD™ 2 x S-rolled Gauze (4.5 in. x 4.1 yd) 1 x HyFin® Vent Chest Seal, Twin Pack 1 x pair Bear Claw® Nitrile Trauma Gloves, Lg. 1 x Nasal Pharyngeal w’ Lube – 28 F 1 x Needle Decompression (ARS) (14 GA) x 3.25” 1 x Eye Shield, Polycarbonate – ORG 1 x Hemostatic Bandage, Combat Gauze w’ Z-Fold 1 x Tape, Duct-Mini – 2” x 100” 1 x Marker, Permanent – BLK, Lg 1 x Card, Combat Casualty Document Tool Separate Components: 1 x C-A-T® (Combat Application Tourniquet®) Black (separate - not in kit) 1 x Tourniquet Holder externally MOLLE Dimensions: L 6 in. x W 3 in. x D 3 in. Weight: 1 lb. 3 oz.

 The Modular 30 Pack features a Laser Cut MOLLE System which allows this pack to be used as a universal combat backpack in any configuration. The backpack has a lid pocket and laser-cut MOLLE on the sides and front. The front opening of the backpack pulls up completely. The insides have hook-and-loop sections for individual features. The hip fins are detachable and the pack comes with three hook-and-loop fastening accessories pouches and a hook-and-loop weapon holster. The main compartment of the backpack can be opened completely from the front or back side, and the hook and loop partition can be removed all together if need be. The back and side panels of the main compartment feature MOLLE hook and loop patches for customizable configurations. NOTE: The pack does come with these medic pouches show, but they can be purchased separately allowing you to convert this pack into a full-fledged medic pack in less than 1 minute.     FEATURES: Padded Back Carrying System Length adjustable shoulder straps Detachable padded hip fins with zipped pockets Side compression on the inside Lid pocket Lid pocket with small organizer Zigzag rubber lacing Antenna ports into the main compartment Includes 3 hook-and-loop fastening accessories pouches Includes weapon holster (hook-and-loop fastening) Laser Cut MOLLE System MOLLE hook-and-loop on the inside for limitless modularity  VOLUME 30 Liters | 1,831 Cubic Inches WEIGHT 69oz | 1.95kg DIMENSIONS 18 x 12 x 7in | 46 x 30 x 18cm MATERIALS CORDURA® 700 den (Multicam 500 den)

5.11 FLEX Tourniquet Pouch Be prepared for the unexpected with the 5.11 FLEX Tourniquet Pouch. Designed for those who see being a first responder as a passion, this pouch ensures quick and reliable access in critical situations. Mount vertically with the 5.11® FLEX-HT™️ Mounting System Mount horizontally with integrated hook/loop straps on MOLLE platforms Adjustable angles on HEXGRID® for versatile positioning Tuckable hook/loop flap for drop-down plate carrier attachment Elastic compression webbing for secure storage during high-speed movement Hypalon® pull tab for rapid access when every second counts Imported and compactly sized at 6.0” H x 2.0” L x 1.5” D, weighing just 0.08kg, this pouch is a reliable companion for any emergency. Please note that it accommodates both Gen 6 and Gen 7 C-A-T® Tourniquets (sold separately).

A resourceful harness for maximum versatility in high threat rescues The Hasty Harness  is a resourceful tool with unlimited applications and is an indispensable part of any webbing equipment toolbox. This multi-purpose harness is ideal for the critical adaptability needed during high threat rescues. The NAR Hasty Harness is constructed of a circumference of approximately 22 feet of 1 in. Tech Tape that outperforms its military spec counterpart in strength, flexibility, knot-ability and durability. Hasty Harness has Multi-Purpose Applications: Hoisting and Lowering Dragging Assisted Carry SPECS NATO NSN# 6530-01-674-9774 Opposing color thread to aid in visual inspection. 1 in. Tech Tape sewn sling 100% Nylon Made in America Dimensions: Packaged: L 6.6 in. x W 4.3 in. x D 1 in. Circumference: 21 ft 10 in. Loop: L 10 ft 11 in. x W 1 in. Tech Tape Minimum Break Strength: 4400 lb Sewn Sling Minimum Break Strength: 6000 lb Weight: 9.4 oz Warning: Designed to be utilized by trained professionals only Not meant to be shock loaded All items must be visually inspected for any deterioration of stitching and webbing both before and after each use.

The Ex-Tract Strap combines and simplifies the majority of the tactical/operational point-of-wounding and vertical casualty removal devices into a single lightweight multi-function extraction strap. Utilizing a unique linear 4-loop multi-handle attachment point design, the Ex-Tract Strap brings unlimited rescue options to the end users’ operational toolbox without having to carry multiple devices. SPECS Point of wounding extraction (torso or feet first) Modified half litter Back pack carry Hasty harness for traditional & confined space lowering & hauling Anchor Sling (rappelling & hauling/ lowering) Used in conjunction with tactical litter systems for hands-free capability Confined space casualty removal Dimensions: Packaged: H 18 in. x W 3.5 in. x D 1 in. Extended Length: 58 in. Weight: 9.3 oz

Handle Assisted High Threat Extraction... This innovative extraction system is constructed of 1 in. Tech Tape with a tensile strength of 4000 lb, outperforming 1 in. military spec webbing not only in strength but also in flexibility, knotability and durability. Two weather-proof flexible handles offer additional grip and comfort to the rescuer. The floating black bull ring provides adjustable attachment point configurations. Also includes a Black Omega, non-locking "D" carabiner rated for 31kN (6968.8 lb.) Designed to Allow the Rescuer to: Maintain engagement with threat Utilize improved body mechanics by maintaining an anatomically correct posture for rapidly extracting greater weight Maintain natural postures & positions that preclude shifting of Personal Protective Equipment (PPE) that either obviates that equipment or exposes additional unprotected body regions Decrease manpower needs in "zeroed in" locations More rapid extraction translates into more rapid entry into the tiered system of TCCC treatment modalities.(Reference: Bleed out from a femoral artery occurs in 2 to 4 minutes) SPECS Designed for linear personnel recovery drags Decreases time on the "X" Exponentially faster drag time with less physical exertion Keeps victim low profile, decreasing the likelihood of additional injuries Head first or Feet first drag options Patents Pending Dimensions: Packaged: H 6.3 in. x W 4.1 in. x D 2.25 in. Extended Length: L 42 in. Minimum Break Strength: 1443 lb Weight: 11.3 oz Warning: Not designed for hoisting or lowering operations All items must be visually inspected for any deterioration of stitching and webbing both before and after each use

QUICK EFFECTIVE OPTION FOR HANDS-FREE EXTRACTIONS... The RAT™ Strap (Rescue Assault Tether) was designed as a force multiplier during tactical operations. Decreasing manpower demands and increasing efficiency of rescuers, the RAT™ Strap enables hands-free casualty movement and threat suppression simultaneously. Critical to this task is the ability to rapidly detach from casualty depending on dynamic of environment, which is accomplished with the quick release shackle. Ideal for shield-assisted, open-field and indoor-corridor rescues. The innovative Daisy Chain configuration is designed to offer multiple reinforced attachment points accommodating the height of the rescuer and the terrain of the rescue site. Multi-Purpose Applications: Extraction Bail-Out Anchor Point SPECS Designed to meet NFPA Standards 1 in. Tech Tape construction with a tensile strength of 4200 lb Reinforced stitching, triple bar-tacked loops Quick Release Shackle for rapid detachment Hands free drag capability which helps maintain the rescuer's engagement with the threat Head first or Feet first drag options Decreases manpower needs in "zeroed in" locations Patents Pending Dimensions: Packaged: H 1 in. x W 4 in. x D 5.5 in. Extended Length: L 62 in. Minimum Break Strength: 2702 lb Weight: 12.7 oz Warning: Designed for linear personnel recovery drags All items must be visually inspected for any deterioration of stitching and webbing both before and after each use.

The STOMP Medical Bag and kit is based on the tried and proven military issue first aid trauma pack popular with the SEAL Teams. The bag is conveniently organized with several Velcro and zippered compartments for easy access to hundreds of items inside. The STOMP bag has several sections that open flat to allow quick and easy access to your instruments and supplies. There two interior sections are ample and give you 4 surface areas with multiple velcro, and mesh and zippered compartments that are placed and organized so that everything is within a quick and easy reach. The STOMP bag is constructed using durable, tough materials making it an ultra-rugged bag that is up for use in the most demanding of conditions. The exterior of the STOMP bag is solidly built and features strong grab handles on the top and side, compression straps on the side, support foam on the back, adjustable shoulder straps and a waist belt, and heavy-duty waterproof zippers. The outside of the bag features M.O.L.L.E webbing for all types of customizations, such as quick access trauma kits or water. Lastly, there is an opening for in the interior for a hydration bladder and the front contains velcro for holding ID or patches. The Stomp Medical Kit has a wide variety of contents and is used by professionals including medics and army personnel. The backpack is available in four olors, Black, Red, Coyote Tan, OD and contains many Velcro and zippered compartments for easy access to over three hundred items inside Dimensions:  Width: 14" in.  Height: 19" in.  Depth: 10" in.  Product Weight: 8 lbs (empty) Contents: Item Quantity  Item Quantity  Cervical Collar 1 6" Elastic Bandages 3 Universal/Sam Splints 2 Blood Clotting Spray 1 2"x2" Gauze Pads 10 Calamine Lotion 6oz. 1 Stethoscope 1 Triangular Bandages 3 Pain Relievers 40 Conforming Gauze 4"x4.1 yds. 2 Eye Pads 5 Ammonia Inhalants 20 EMT Shears 2 Lip Balm 2 LED Pen Light 1 Skin Probe 1 Instant Ice Packs 3 Alcohol Wipes 20 BZK Antiseptic Wipes 26 2" Elastic Bandages 6 Knuckle Bandages 20 Pair PLK Nitrile Gloves 5 Burn Spray 1 6" Trauma Dressings 2 Safety Pins 6 Sting & Bite Wipes 9 Multi-Trauma Dressings 2 Bandage Strips 1"x3" 100 BleedStop Bandages 4 5"x9" Abdominal Pads 10 Eye/Skin Wash 2 Blood Pressure Kit 1 Emergency Blankets-Silver/OD 2 Burn Gel 5 CPR Face Shields 2 4"x4" Sterile Gauze 5 Triple Antibiotics 20 Scalpel Handle #3 1 Scalpel Blades 6 Oral Airways 4 Straight Hemostats 2 Curved Hemostats 2 SS Tweezers 1 Suture Sets 5 Iodine Wipes 100 First Aid Guide 1 1" Tape 3 Instant Glucose 1 Butterfly Closure Strips 20 Tongue Depressors 5 4" Trauma Dressings 2 QuikClot Advanced Clotting Gauze 3 Hand Sanitizer 2oz. 1 Latex Tourniquet 1

The SK7 EON R Combat Shirt is an incredibly affordable and durable tactical combat shirt made from U.S.A.  7.5 oz. (220 grams.) rip-stop fabric NYCO fabric 50% nylon/50% cotton fade resistant fabric and 100% cotton torso. The base layer shirt is designed to regulate body temperature, wick moisture, quick drying and anti-odor control and a patent pending Teflon finish for stain resistance and water repellency The shirt fits snugly yet comfortably around the torso while allowing ample room in the arms and shoulders for movement thanks to the SixKa CORE-Way hybrid back with stretch mesh panels enhances freedom of movement and heat and moisture dissipation Flat-seam construction and seamless top of shoulder helps prevent skin irritation.  The cuffs are secured and adjustable via Velcro hook and loop in cuffs.  The sleeves have multiple compartments within the pockets and the versatile multi-bicep pocket with original Velcro hook and loop YKK pockets and placket behind frontal zipper that can be removed to apply Identification patches. The elbow has a pocket to insert a protective pocket  The shirt is available in a multitude of sizes and colors U.S. PATENT PENDING NO.29669087

The SK7 EON R Combat Shirt is an incredibly affordable and durable tactical combat shirt made from U.S.A.  7.5 oz. (220 grams.) rip-stop fabric NYCO fabric 50% nylon/50% cotton fade resistant fabric and 100% cotton torso. The base layer shirt is designed to regulate body temperature, wick moisture, quick drying and anti-odor control and a patent pending Teflon finish for stain resistance and water repellency The shirt fits snugly yet comfortably around the torso while allowing ample room in the arms and shoulders for movement thanks to the SixKa CORE-Way hybrid back with stretch mesh panels enhances freedom of movement and heat and moisture dissipation Flat-seam construction and seamless top of shoulder helps prevent skin irritation.  The cuffs are secured and adjustable via Velcro hook and loop in cuffs.  The sleeves have multiple compartments within the pockets and the versatile multi-bicep pocket with original Velcro hook and loop YKK pockets and placket behind frontal zipper that can be removed to apply Identification patches. The elbow has a pocket to insert a protective pocket  The shirt is available in a multitude of sizes and colors U.S. PATENT PENDING NO.29669087

 TRIDENT-32 (Gen-3) improvements:  Low profile redesigned Loop faced/Hypalon MOLLE-Air panels User configurable updated padded dividers Improved suspension system (new shoulder straps, vented back panel and frame) provides comfortable carry  Redesigned collapsible side bottle/tripod pocket. TRIDENT-32 backpack is the big brother of our very popular TRIDENT-21 backpack in a larger, more versatile form. You wear it like a backpack, with the option of quick-access from the side, just like a sling packThe new TRIDENT-32 is 32 liters in total capacity (11 liters larger than the TRIDENT-21), with improved ergonomic shoulder straps, breathable back panel and a removable pull forward adjustable padded waist belt. Updated collapsible side bottle pocket ready to carry your drink container or tripod with included elastic tie down. You can now comfortably carry more gear and heavier loads.Padded main compartment is lined with quilted loop and four configurable dividers providing extra protection and organization for your everyday carry (EDC) items, photography gear, or range gear. A dedicated laptop sleeve holds a 17" laptop (MacBook Pro / Air). You can access the interior from top or left side, and like a slingpack, you can quickly get to your gear by swinging the backpack to your front and retain it with a side gear handle. Total 45 pockets and slots to organize your gear.High-visibility 210-D ripstop nylon interior helps you find things in low-light conditions. Dual hydration system (hydration/Hook and Loop Accessory compartment, and main compartment) let you carry up to 6 liters of water at once. Hydration hose can be anchored to the left or right shoulder strap.Low profile Laser-cut Hypalon and Loop faced MOLLE-Air structure is MOLLE-compatible and offers ID patch real estate. Interior loop fields for Hook and Loop Accessories and internal organization.For the best balance of weight and strength, we use ultra-durable 1000-D Cordura® nylon at high-wear areas (bottom panels), and 500-D Cordura® for the rest of the bag. Our Cordura® is treated with DWR (Durable Water Repellent) for all-weather performance. Using ITW/Duraflex hardware, and lockable YKK® zippers, the TRIDENT is a compact day pack ready to handle any tough situations. Specs & Features NEW: Redesigned collapsible side water bottle/ tripod pocket NEW: Low profile redesigned Loop faced/Hypalon MOLLE-Air panels NEW: User configurable updated padded dividers NEW: Improved removeable padded waist belt NEW: Tough 1000-D on the bottom lightweight 500-D CORDURA for the body NEW: Improved suspension system (new shoulder straps, vented back panel and frame) provides comfortable carry Net Weight: 4.50 pounds |2041 grams Total Capacity: 32 Liters Overall Exterior Size (Fully Extended): 19.5" (H) x 12" (W) x 9.25" (D) Main Compartment (Interior): 19" (H) x 11" (W) x 6" (D) Top Front Compartment (Interior): 5.5" (H) x 10.5" (W) x 2.25" (D) Bottom Front Compartment (Interior): 13" (H) x 11" (W) x 2.25" (D) Rear Hydration / Hook and Loop Accessory Compartment (Interior): 18.5” (H) x 10.5” (W) Side Admin Compartment (Interior): 12” (H) x 5.75” (W) Water bottle pocket on outside of Side Admin can fit bottles with up to 3.60” diameter Padded quilted sleeve for tablet or laptop up to 17” (max. size 18” W x 10.5” D) Full height High-visibility quilted loop lining for organization options Main zipper side grab handle for stability Total 45 organizing compartments and slots MOLLE/PALS spec panels for accessory attachment Materials: 1,000-D Mil-grade Cordura® fabric on the bottom and 500-D for the body treated with Durable Water Repellant Genuine MADE-IN-USA MultiCam-Black Cordura® by Crye Precision™ Hi-visibility, lightweight & moisture resistant 210-D Ripstop nylon fabric with DWR (Durable Water Repellent) coating Durable RC-Class YKK® lockable zippers, reversed for protection Hypalon & Loop faced MOLLE-Air structure for MOLLE accessory attachment Mil-grade ITW® and UTX-Duraflex® hardware made from high tensile strength Acetal polymer ITW Zipline Orbit (Main zipper) and Spartan molded zipper pulls High tensile strength nylon webbings and binding tapes Finished with high tensile strength bonded nylon thread