The Rescue Task Force Basic Heavy Duty Plate Carrier is a highly customizable plate carrier vest with many of the best features that you are looking for. The front and rear panel plate carrier compartments will accommodate the standard size and the newer larger armor plates up to 11" X 14" in size. The cummerbund also features side armor pockets to accommodate side armor plates up to 6” X 8”. The plate carrier has fully adjustable heavy duty nylon shoulder straps and large quick connect buckles to adjust how high or low the front and rear panels sit from the wearer’s shoulders. The cummerbund is adjustable in length from a medium to 2XL+ t-shirt sizes, up to a 51” chest/waist size. The front, rear, and side panels all feature MOLLE webbing for customization of your plate carrier to what your mission requires. Fully compatible with MOLLE accessories like holsters, magazine pouch, and utility pouches. The Rescue Task Force Basic Heavy Duty Plate Carrier is a very tough and well made plate carrier with reinforced double stitching in all the critical locations as well as sizing options to fit a wide variety of rescuers among various shifts. FEATURES: MOLLE webbing on the front, back, and side panels allow the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L Side pockets will allow for 6" X 8"  side armor panels/plates. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.

This affordable Rescue Task Force helmet features a ballistic shell constructed of Kevlar rated at Level IIIA, and capable of stopping 9mm and .44 Magnum rounds up to 1,400 FPS. The helmet features a modern four-point retention system and suspension system for added comfort and stability. Fully adjustable for the perfect fit. It is available in 2 sizes to fit the majority of team members across various shifts Size Large: Size: 22.0" - 22.8" (56cm - 58cm); Weight: 51.1 oz. (1.45 kg) Size XL: Size: 22.8”- 23.6" (58 cm x 60 cm ) Weight: 54.6oz (1.55kg) Not only is the helmet a great value, but the price includes a ballistic helmet carry bag, with carrying straps, shoulder strap, ID holder, MOLLE straps. Dimensions: 10.75"L X 10.0'W X 6.0"D

The Expert Heavy Duty Plate Carrier is a very affordable vest designed to fit larger front & back armor plates up to 11" X 14" and features MOLLE webbing for the ultimate in custom configuration. FEATURES: MOLLE webbing on the front, back, and side panels allow the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L Side pockets will allow for 6" X 8"  side armor panels/plates. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.

This discreet ballistic panel fits great in most larger sized backpacks and provides a certain degree of protection against level III+ rated threats from most high-velocity rifles.  Features:  Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a light weight ballistic plate Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds Flat 11" X 14" rectangular cut for maximum coverage. Can be used for the back panel of a plate carrier, VISM Assault backpack, briefcase, etc. Fully sealed to protect against liquids, chemicals, and other harsh elements Ideal for use in VISM Plate Carriers Weight: 4.4 lbs. (11”x14” Rectangle Cut) Assembled in the U.S.A.  Parents: Please, measure the inside of your child's pack before ordering to ensure proper fit. Should you have ANY questions regarding ballistics, please reach out to us and we will help you in every way.

Note: This plate has been independently tested to meet or exceed the Level III+ standard.  Perfect for your armor carrier vest, the VISM Polyethylene Ballistic Plate has been created to be an amazing way to keep protected. A high end armor plate is a crucial unit to have with you in any tactical environment. And because of the VISM Polyethylene Ballistic Plate, having access to an incredible armored plate has not been simpler. Created making use of the highest quality materials, these plates are certain to keep you safe. Features/Specifications: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate. Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds Curved design fits the user with greater comfort, and the cut upper corners (Shooter's Cut) allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12” and 11”x14” sizes Weight: 3.5 lbs. (10”x12”) Weight: 4.5 lbs. (11”x14”) Assembled in the U.S.A.    

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Side Plate is constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate that is rated at Level III Plus - capable of stopping 7.62x51mm. FEATURES: Flat 6" X 6" Square Cut for side coverage. Can be used for the side pockets of some plate carriers with 6" X 6" side pockets. Ideal for use in some VISM Plate Carriers with 6" X 6" side panel pockets. Weight: 17.1 oz. (6”X6” Square Cut) Fully sealed to protect against liquids, chemicals, and other harsh elements Assembled in the U.S.A.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Side Plate is constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate that is rated at Level III Plus - capable of stopping 7.62x51mm. FEATURES: Curved 6" X 6" Square Cut for side coverage. Single curve to better conform to the side of the body for more comfort. Can be used for the side pockets of some plate carriers with 6" X 6" side pockets. Ideal for use in some VISM Plate Carriers with 6" X 6" side panel pockets. Weight: 17.1 oz. (6”X6” Square Cut) Fully sealed to protect against liquids, chemicals, and other harsh elements Assembled in the U.S.A.

Note: This plate has been independently tested to meet or exceed the Level III+ standard. Perfect for your armor carrier vest, the VISM Polyethylene Ballistic Plate has been created to be an amazing way to keep protected. A high-end armor plate is a crucial unit to have with you in any tactical environment. And because of the VISM Polyethylene Ballistic Plate, having access to an incredible armored plate has not been simpler. Created making use of the highest quality materials, these plates are certain to keep you safe. Features/Specifications: Constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) creating a lightweight ballistic plate. Rated at Level III Plus - capable of stopping 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds The MULTI-CURVED design fits the user with greater comfort, and the cut upper corners (Shooter's Cut) allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12”  Weight: 3.5 lbs. (10”x12”) Assembled in the U.S.A. Included Accessories: Fully sealed to protect against liquids, chemicals, and other harsh elements.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The Side Plate is a wonderful adjunct to our Level III+ SRT SiC Ceramic/PE Composite Plate.  This particular plate is a 6"x6" Special Rifle Threat (SRT) side plate designed to defeat Level III+ threats from high velocity rifle rounds from the most commonly used rifle threats in use. The Ballistic plate is constructed of a SiC Ceramic/UHMWPE composite resulting in a lighter plate material structure that allows for a greater crack resistance over other ceramic plate designs FEATURES: Can be used for the side pockets of some plate carriers with 6" X 6" side pockets. Ideal for use in some VISM Plate Carriers with 6" X 6" side panel pockets. Fully sealed to protect against liquids, chemicals, and other harsh elements Dimensions: 6” X 6” X 0.8” Weight: 1.6 lbs. Assembled in the U.S.A.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. This high-quality pistol armor plate is made with UHMWPE fabrics and pressed with a proprietary technique to create a significantly lighter armor plate from current offerings.  The plate features a durable sprayed-on Polyurea outer coating that protects and fully seals the UHMWPE plate for corrosion protection, structural enhancement, waterproof, abrasion resistance, and for a nice cosmetic appearance. This plate is rated at Level IIIA+ protection, capable of stopping 9mm and .44 Magrounds up to 1,400 FPS. , as tested in accordance with Level IIIA Standard 0101.06.No rifle ammunition protection. The addition UHMWPE layers provide additional Level IIIA+ protectionsagainst these following SPECIAL THREATS cartridges: 9mm, 115 gr. FMJ - Fiocchi 9mm, 127 gr. +P+ SXT .40-cal., 95 gr. HP S&W 5.7 X 28mm, 27 gr. LFHP SS195 5.7 x 28mm, 28 gr. HP SS192 5.7 x 28mm, 40 gr. V-MAX SS197SR - Hornady 7.62 x 25mm, 95 gr. FMJ - Tokarev .357 SIG, 115 gr. JHP .357 cal., 125 gr. HP SIG Gold Dot .357 cal., 125 gr. FMJ SIG - FN All testing should follow Level IIIA Standard 0101.06. The plate also features a Multi-Curved design that fits the user with greater comfort and the Shooter's Cut angled upper corners allow for better mobility. Also protects against knives, edged blades, and spike weapons that offer the wearer the best possible stab protection available. Dimensions: 12.0”H X 10.0”W X 0.46”D Weight: 27.0 oz.

Note: This plate has been independently tested to meet or exceed the NIJ Level III+ Standard. The VISM Level IV Ceramic/PE Composite Plate is constructed of Ultra High Molecular Weight Polyethylene (UHMWPE) to provide a lightweight yet ballistic resistant plate. Rated at a Level III+, it offers protection against 7.62x51mm, 7.62x39mm, and 5.56x45mm rounds. The curved design allows for greater comfort and mobility, and the cut upper corners (STR's Cut) provide additional maneuverability. Fully sealed, the plate is ideal for use in the majority of plate carriers on the market and offers protection against liquids, chemicals, and other harsh elements. FEATURES: Ballistic plate is constructed of a Ceramic/UHMWPE composite resulting in lighter plate Material structure allows for a greater crack resistance over other ceramic plate designs Rated at level IV- capable of stopping .30 caliber AP and M2 rounds with a bullet weight of 166 grains Curved design fits the user with greater comfort , and the cut upper corners allow for better mobility Fully sealed to protect against liquids, chemicals, and other harsh elements Available in 10”X12”size Weight: 5.5 lbs. Assembled in the U.S.A.

NIJ Certified Level III PE Ballistic Plate - Curved Shooters Cut 10"X12" This premium ballistic plate is certified to the NIJ-0101.06 Level III standard for protection from 7.62x51mm NATO rounds. Constructed of 3 layers of Ultra High Molecular Weight Polyethylene (UHMWPE) with a special foam core to disperse energy, it provides superior protection and durability. Features/Specifications: NcSTAR has received its first NIJ Certified body armor plate, the VISM Level III 10x12 Ballistic Plate.  Each plate weighs only 3.3 pounds to reduce fatigue.   The curved design provides a contouring comfortable fit, with upper corners cut (shooter’s cut) for maximum mobility.   The plate is also fully sealed to protect against liquids, chemicals, and other harsh elements.   10 Year Warranty Assembled in the USA. 

The VISM Quick Release Heavy Duty Plate Carrier designed to fit larger front & back armor plates up to 11" X 14" in size. MOLLE webbing for the ultimate in custom configuration. The integrated QR strap setup will allow the VISM Quick Release Plate Carrier to separate into 4 separate panel pieces in case of an emergency that requires the quick removal of the plate carrier from the wearer. FEATURES: MOLLE webbing on the front, back, and side panels allows the attachments of MOLLE accessories like holsters, mag pouches, utility pouches, and other essential gear. Adjustable for length cummerbund with MOLLE webbing, cummerbund can be extended out to 51"L. Hook and Loop fasteners on the ends of the cummerbund to secure with the front panel hook and loop fasteners, for a secure fit. Adjustable for length Shoulder straps with large heavy duty quick connect buckles and with hook and loop fasteners. Includes two padded shoulder covers with MOLLE webbing, hook and loop fasteners, and loops for communications cabling routing. Top three MOLLE webbing rows on the front and back panels have loop fasteners for attaching (hook) Unit, ID, and name tapes to the front and rear panels. Heavy Duty drag handle on the top of the rear panel. 10"X 6" front pocket with hook and loop enclosure. Breathable mesh inner panels with separate internal pockets for soft body armor panels and hard plate armor. Made with tough and durable PVC material that is water and chemical resistant. Double and re-enforcement cross stitching in critical areas.