Product information
The TacMed™ IV Evaporative Cooling System (IVECS™) was developed to prevent IV fluids from reaching excessively hot and potentially dangerous temperatures. Hot fluids are counter-productive when treating heat casualties. When operating in a desert or any low humidity hot environment, this becomes a serious concern.
The IVECS’ efficient design maintains fluids at a safe temperature for up to 18 hours without additional cooling assistance. The cooling systems are cost effective and re-usable. They can easily be converted to a pressure infuser with the addition of a standard blood pressure cuff. It will accommodate both 500ml and 1000ml bags. The IVECS™ provides an effective, power free means of delivering IV fluids at a safe temperature under adverse conditions and in harsh climates.
HOW DOES IT WORK?
The IVECS™ does not need to be cooled prior to inserting the IV bag. The only step required is to soak the pouch for approximately 15 minutes. It is not like a cold pack that absorbs or transfers heat energy from one mass to another to cool. The pouch cools through the method of evaporation. The temperature is controlled by the movement of water in the form of gas traveling over the surface area of the IV bag. While the circulation of air around the bag is important to allow maximum efficiency, it is not required.
The IVECS™ is an essential piece of equipment for any care provider operating in extreme conditions.
According to guidelines established by the leading authority on patient care and safety in the US, fluids stored at ambient temperatures in Iraq, Afghanistan, and other desert areas around the world are not maintained at a safe temperature. The average daily temperatures in these areas can be in excess of 54º C (130º F). Other studies indicate that the administration of fluids at temperatures exceeding 52.2º C (126º F) can damage tissue and blood cells. While forward surgical units, combat support hospitals, and vehicle-based health care providers have the ability to store fluids at safe temperatures, the combat medic or wilderness medical provider do not.
Recent reports from Iraq have shown the IVECS™ to maintain fluids at temperatures well below the established maximum. One soldier reported a temperature of 35.5 C (96º F). This demonstrates the impact of the addition of a light breeze and occasional shade, which make the IVECS™ even more effective.
Tests conducted by USAMRMC (US Army Medical Research & Material Command) proved the IVECS™ is effective in extremely harsh, unrealistic conditions. The bag was tested over a period of 13.5 hours at a temperature of 54º C (130º F) and a maximum of 5% humidity with no wind. The chart below displays the results of the test.
Within 2.5 hours, the control bag was already at an ambient temperature of 54º C (130º F). The bag stored in the IVECS™ was only 43.3º C (110º F) and then began a very slow climb to a maximum temperature of 50º C (122º F), four degrees below the maximum recommended temperature for blood products and fluids.
NSN # 6515-01-530-7024
HOW IT WORKS
SEAL is a fast-acting, easy-to-use hemostatic spray that stops bleeding in seconds
1
IDENTIFY THE WOUND
Quickly locate the source of bleeding and prepare to apply SEAL spray.
2
SPRAY DIRECTLY
Apply SEAL directly to the wound from a distance of 2-3 inches. Cover the entire wound surface.
3
GEL FORMATION
SEAL instantly forms a protective gel barrier over the wound, halting blood flow in seconds.
4
EASY CLEANUP
When medical help arrives, SEAL can be easily wiped away for wound treatment.
PROVEN SCIENCE
FDA-CLEARED FOR OTC USE
BUILT ON PROVEN SCIENCE
FORMS A GEL BARRIER ON CONTACT
WHY CHOOSE SEAL?
SEAL outperforms traditional bleeding control methods
TRUSTED BY PROFESSIONALS
SEAL is the preferred choice across multiple sectors
MILITARY
Deployed for battlefield medicine and combat casualty care
LAW ENFORCEMENT
Essential for patrol officers and tactical units
FIRE RESCUE
Rapid response for emergencies and disaster situations
EMS
Critical for pre-hospital care and patient transport
WILDERNESS
Vital for remote locations and outdoor adventures
FREQUENTLY ASKED QUESTIONS
Everything you need to know about SEAL
What is SEAL Hemostatic Spray?
SEAL is an FDA-cleared hemostatic spray designed to rapidly stop bleeding. It works by forming a gel barrier over the wound upon contact, instantly halting blood flow while promoting the natural clotting process.
How does SEAL work?
SEAL uses a proprietary formula that reacts with blood to instantly form a protective gel barrier. This barrier physically stops bleeding while simultaneously activating the body's natural clotting factors, providing both immediate and sustainable hemostasis.
Is SEAL safe to use?
Yes, SEAL is FDA-cleared for over-the-counter use. The formula is non-toxic and does not cause tissue damage. It has undergone rigorous testing to ensure safety and effectiveness in a variety of applications.
Can SEAL be used on all types of wounds?
SEAL is designed for external use on minor to moderate wounds. It should not be used on severe arterial bleeding that requires immediate medical attention, deep puncture wounds, or internal injuries. As with any medical product, consult with a healthcare provider for serious injuries.
How long does SEAL last once applied?
SEAL's gel barrier remains effective for up to 24 hours. However, it's recommended to seek professional medical care as soon as possible. The barrier can be easily removed when proper wound treatment is available.
What's the shelf life of SEAL?
SEAL has a shelf life of 3 years from the date of manufacture when stored properly. Each canister is marked with an expiration date. Store at room temperature away from direct sunlight and extreme heat for maximum effectiveness.
My Wishlist
Wishlist is empty.
Compare
Shopping cart


